Showing 17–32 of 75 results

  • Fluke 376 True RMS AC/DC Clamp Meter with iFlex®

    SPECIFICATIONS

    • AC Current via Jaw
      Range : 999.9A
      Resolution : 0.1A
      Accuracy : 2% ± 5 digits (10-100 Hz) ; 2.5% ± 5 digits (100-500 Hz)
    • AC Current via Flexible Current Probe
      Range : 2500A
      Resolution : 0.1 A (≤ 999.9 A) ; 1 A (≤ 2500 A)
      Accuracy : 3% ±5 digits (5 – 500 Hz)
    • DC Current
      Range : 999.9A
      Resolution : 0.1 A
      Accuracy : 2% ±5 digits
    • AC Voltage
      Range : 1000V
      Resolution : 0.1 V (≤ 600.0 V) ; 1 V (≤ 1000 V)
      Accuracy : 1.5% ± 5 digits (20 – 500 Hz)
    • DC Voltage
      Range : 1000V
      Resolution : 0.1 V (≤ 600.0 V) ; 1 V (≤ 1000 V)
      Accuracy : 1% ±5 digits
    • Frequency Via Jaw
      Range : 5.0 – 500.0 Hz
      Resolution : 0.1 Hz
      Accuracy : 0.5% ± 5 digits
    • Frequency via Flexible Current Probe
      Range : 5.0 – 500.0 Hz
      Resolution : 0.1 Hz
      Accuracy : 0.5% ± 5 digits
    • Resistance
      Range : 60 kΩ
      Resolution : 0.1 Ω (≤ 600 Ω) ; 1 Ω (≤ 6000 Ω) ; 10 Ω (≤ 60 kΩ)
      Accuracy : 1% ± 5 digits
    • Capacitance
      Range : 1000 μF
      Resolution : 0.1 μF (≤ 100 μF) ; 1 μ F (≤ 1000 μF)
      Accuracy : 1% ± 4 digits
    • Jaw Opening : 34mm
    • Flexible Current Probe Diameter : 7.5mm
    • Flexible Current Probe Cable Length (head to electronics connector) : 1.8M
    • Operating Temperature : 14°F to 122°F (-10 °C to 50 °C)
    • Storage Temperature : -40 °F to 140 °F (-40 °C to 60 °C)
    • Size : 246 mm x 83 m x 43 mm
    • Weight : 388g

    FEATURES

    • iFlex® Flexible Current Probe expands the measurement range to 2500 A AC
    • CAT IV 600 V, CAT III 1000 V
    • True RMS AC voltage and current for accurate measurements on non-linear signals
    • Min, max, average and Inrush recording to capture variations automatically
    • Integrated low pass filter and state-of-the-art signal processing allows for use in noisy electrical environments while providing stable readings
    • Proprietary Inrush measurement technology to filter out noise and capture motor starting current exactly as the circuit protection sees it
    • Ergonomic design fits in your hand and can be used while wearing protective equipment
    • Large, easy to read backlight display automatically sets the correct measurement range so you do not need to change the switch positions while taking a measurement
    • Three-year warranty
    • Soft Carrying Case
    Read more

  • Fluke 393 Solar Clamp Meter CAT III 1500 V

    SPECIFICATIONS 

    • AC Current via Jaw
      Range : 999.9A
      Resolution : 0.1A
      Accuracy : 2% ± 5 digits (10-100 Hz) ; 2.5% ± 5 digits (100-500 Hz)
    • AC Current via Flexible Current Probe
      Range : 2500A
      Resolution : 0.1 A (≤ 999.9 A) ; 1 A (≤ 2500 A)
      Accuracy : 3 % RD + 5 digits (10 Hz to 500 Hz)
    • DC Current
      Range : 999.9A
      Resolution : 0.1 A
      Accuracy : 2% ±5 digits
    • AC Voltage
      Range : 600V to 1000V
      Resolution : 0.1 V (≤ 600.0 V) ; 1 V (≤ 1000 V)
      Accuracy : 1 % RD + 5 digits (20 Hz to 500 Hz)
    • DC Voltage
      Range : 600V to 1500V
      Resolution : 0.1 V (≤ 600.0 V) ; 1 V (≤ 1500 V)
      Accuracy : 1% ±5 digits
    • Frequency Via Jaw
      Range : 5.0 – 500.0 Hz
      Resolution : 0.1 Hz
      Accuracy : 0.5% ± 5 digits
    • Frequency via Flexible Current Probe
      Range : 5.0 – 500.0 Hz
      Resolution : 0.1 Hz
      Accuracy : 0.5% ± 5 digits
    • Resistance
      Range : 600.0 Ω ; 6000 Ω ; 60 kΩ
      Resolution : 0.1 Ω (≤ 600 Ω) ; 1 Ω (≤ 6000 Ω) ; 10 Ω (≤ 60 kΩ)
      Accuracy : 1% ± 5 digits
    • Capacitance
      Range : 100 μF ; 1000 μF
      Resolution : 0.1 μF (≤ 100 μF) ; 1 μ F (≤ 1000 μF)
      Accuracy : 1% ± 5 digits
    • Jaw Opening : 34mm
    • Flexible Current Probe Diameter : 7.5mm
    • Flexible Current Probe Cable Length (head to electronics connector) : 1.8M
    • Operating Temperature : 14°F to 122°F (-10 °C to 50 °C)
    • Storage Temperature : -40 °F to 140 °F (-40 °C to 60 °C)
    • Size : 281 mm x 84 mm x 49 mm
    • Weight : 520g

    FEATURES

    • Measure safely with CAT III 1500 V rated clamp meter
    • Thin jaw for access to cables in crowded combiner boxes
    • Sturdy IP54 rated for outdoor use and solar installation
    • Work efficiently with dc power measurement, audio polarity and visual continuity
    Read more

  • HIOKI AC CLAMP METER 3280-10F

    SPECIFICATIONS

    • AC Current range : 41.99 to 1000 A, 3 ranges (50 Hz to 60 Hz, Average rectified), Basic accuracy: ±1.5 % rdg. ±5 dgt.
    • DC Voltage range : 419.9 mV to 600 V, 5 ranges, Basic accuracy: ±1.0 % rdg. ±3 dgt.
    • AC Voltage range : 4.199 V to 600 V, 4 ranges (45 to 500 Hz, Average rectified), Basic accuracy: ±1.8 % rdg. ±7 dgt.\
    • Resistance range : 419.9 Ω to 41.99 MΩ, 6 ranges, Basic accuracy: ±2 % rdg. ±4 dgt.
    • Other functions : Continuity: Buzzer sounds at 50 Ω ±40 Ω or less, Data hold, Auto power save, Drop-proof from height of 1 meter
    • Display : LCD, max. 4199 dgt., Display refresh rate: 400 ms
    • Environmental protection : IP40 dustproof and waterproof
    • Power supply : Coin type lithium battery (CR2032) ×1, Continuous use 120 hours
    • Core jaw dia. : φ 33 mm (1.30 in)
    • Dimensions and mass : 57 mm (2.24 in) W × 175 mm (6.89 in) H × 16 mm (0.63 in) D, 100 g (3.5 oz)

    FEATURES

    • Measure the fundamental waveform component using the average rectified method
    • Expanded -25°C to 65°C operating temperature range
    • Connect the CT6280 flexible sensor to measure up to 4199 A in thick or paired wires
    • Drop proof design withstands drop from a height of 1 meter
    Read more

  • HIOKI AC/DC CLAMP METER CM4371-50

    SPECIFICATIONS

    • DC Current range : 20.00 A/600.0 A, Basic accuracy: ±1.3% rdg. ±0.08 A (20 A range)
    • AC Current range :  20.00 A/600.0 A (10 Hz to 1 kHz, True RMS), Basic accuracy: 45-66 Hz: ±1.3% rdg. ±0.08 A (at 20 A
    • Crest factor : 20.00 A range: 7.5 ; 600.0 A range: 3 or less
    • DC+AC Current range : 20.00 A/600.0 A (10 Hz to 1 kHz, True RMS), Basic accuracy DC, 45-66 Hz: ±1.3% rdg. ±0.13 A (at 20 A)
    • DC Voltage range : 600.0 ｍV to 1000 V (When using P2000: 600.0 V to 2000 V)
    • AC Voltage range : 6.000 V to 1000 V, 4 ranges (15 Hz to 1 kHz, True RMS), Basic accuracy 45 – 66 Hz: ±0.9% rdg. ±0.003 V (at 6 V)
    • DC+AC Voltage range : 6.000 V to 1000 V, 4 ranges, Basic accuracy DC, 45 – 66 Hz: ±1.0% rdg. ±0.013 V (at 6 V)
    • Resistance range : 600.0 Ω to 6.000 MΩ, 5 ranges, Basic accuracy: ±0.7% rdg. ±0.5 Ω (at 600 Ω)
    • Capacitance range : 1.000 μF to 1000 μF, 4 ranges, Basic accuracy: ±1.9% rdg. ±0.005 μF (at 1 μF)
    • Frequency range : 9.999 Hz to 999.9 Hz, 3 ranges, Basic accuracy: ±0.1% rdg. ±0.003 Hz (at 9.999 Hz)
    • Temperature (K) : -40.0 to 400.0 ˚C, add temperature probe accuracy to basic accuracy of ±0.5% rdg. ±3.0 ˚C
    • Voltage detection : Hi: 40 V to 600 V AC, Lo: 80 V to 600 V AC, 50/60 Hz
    • Dustproof, waterproof : IP54 (Storage or measurement of current of an insulated conductor)
    • Core jaw diameter : φ33 mm (1.30 in), Jaw dimension: 69 mm (2.72 in) W× 14 mm (0.55 in)
    • Power supply : LR03 Alkaline battery ×2 ; Continuous use: 40 hr (without Z3210 installed), 20 hr. (with Z3210 installed and using wireless communications) ; Other conditions: 10 A AC measurement, backlight off, 23°C reference value

    FEATURES

    • CAT IV 600 V, CAT III 1000 V When using the P2000: CAT III 2000 V, CAT IV 1000 V
    • Measure DC voltages of up to 2000 V (*1) for open voltage inspections of solar panels
    • Simultaneously measure inrush current in RMS and crest values
    • Easily transfer measurement data to your smartphone or tablet by using our free app GENNECT Cross or to an Excel® file
    • Harmonic analysis from 1st to 30th order with our free app GENNECT Cross
    • Automatic AC/DC function helps boost work efficiency
    Read more

  • HIOKI AC/DC CLAMP METER CM4373-50

    SPECIFICATIONS 

    • DC Current Range : 600.0 A/2000 A, Basic accuracy: ±1.3% rdg. ±0.3 A (600 A range)
    • AC Current Range : 600.0 A/2000 A (10 Hz to 1 kHz, True RMS), Basic accuracy 45 – 66 Hz: ±1.3% rdg. ±0.3 A (at 600 A)
    • Crest factor : 600.0 A range: 3 or less ; 2000 A range: 2.84 or less
    • DC+AC Current range : 600.0 A/2000 A (10 Hz to 1 kHz, True RMS), Basic accuracy DC, 45-66 Hz: ±1.3% rdg. ±1.3 A (at 600 A)
    • DC Voltage range : 600.0 ｍV to 1000 V (When using P2000: 600.0 V to 2000 V)
    • AC Voltage range : 6.000 V to 1000 V, 4 ranges (15 Hz to 1 kHz, True RMS), Basic accuracy 45 – 66 Hz: ±0.9% rdg. ±0.003 V (at 6 V)
    • DC+AC Voltage range : 6.000 V to 1000 V, 4 ranges, Basic accuracy DC, 45 – 66 Hz: ±1.0% rdg. ±0.013 V (at 6 V)
    • Resistance range : 600.0 Ω to 6.000 MΩ, 5 ranges, Basic accuracy: ±0.7% rdg. ±0.5 Ω (at 600 Ω)
    • Capacitance range : 1.000 μF to 1000 μF, 4 ranges, Basic accuracy: ±1.9% rdg. ±0.005 μF (at 1 μF)
    • Frequency range : 9.999 Hz to 999.9 Hz, 3 ranges, Basic accuracy: ±0.1% rdg. ±0.003 Hz (at 9.999 Hz)
    • Temperature (K) : -40.0 to 400.0 ˚C, add temperature probe accuracy to basic accuracy of ±0.5% rdg. ±3.0 ˚C
    • Voltage detection : Hi: 40 V to 600 V AC, Lo: 80 V to 600 V AC, 50/60 Hz

    FEATURES

    • CAT IV 600 V, CAT III 1000 V
      When using P2000: CAT III 2000 V, CAT IV 1000 V
    • Measure DC voltages of up to 2000 V (*1) for open voltage inspections of solar panels
    • Simultaneously measure inrush current in RMS and crest values
    • Easily transfer measurement data to your smartphone or tablet by using our free app GENNECT Cross or to an Excel® file (*2)
    • Harmonic analysis from 1st to 30th order with GENNECT Cross (*2)
    • Automatic AC/DC function helps boost work efficiency
    Read more

  • HIOKI CLAMP ON AC/DC HiTESTER 3288-20

    SPECIFICATIONS

    • DC Current range : 100.0/ 1000 A, Basic accuracy: ±1.5 % rdg. ±5 dgt.
    • AC Current range : 100.0/ 1000 A, (10 Hz to 500 Hz, True RMS), Basic accuracy: ±1.5 % rdg. ±5 dgt.
    • DC Voltage range : 419.9 mV to 600 V, 5 ranges, Basic accuracy: ±1.3 % rdg. ±4 dgt.
    • AC Voltage range : 4.199 V to 600 V, 4 ranges, Basic accuracy: ±2.3 % rdg. ±8 dgt. (30 to 500 Hz, True RMS)
    • Resistance range : 419.9 Ω to 41.99 MΩ, 6 ranges, Basic accuracy: ±2 % rdg. ±4 dgt.
    • Other functions : Continuity: (50 Ω ±40 Ω) or less buzzer sounds, Data hold, Auto power save, Auto zero (DC A)
    • Display : LCD, max. 4199 dgt., Display refresh rate: 2.5 times/s
    • Power supply : Coin type lithium battery (CR2032) ×1, Continuous use 35 hours
    • Core jaw dia. : φ 35 mm (1.38 in)
    • Dimensions and mass : 57 mm (2.24 in) W × 180 mm (7.09 in) H × 16 mm (0.63 in) D, 150 g (5.3 oz)

    FEATURES

    • Voltage, resistance, and continuity check functions
    • Use the 3288 for high current measurements such as UPS emergency batteries and train motors
    Read more
  • ,

    HIOKI CM-4001 Ac Leakage Clampmeter

    SPECIFICATIONS 

    • AC Current Range : 60.00 mA/ 600.0 mA/ 6.000 A/ 60.00 A/ 600.0 A, 5 ranges (40 Hz to 1 kHz, True RMS)
      Accuracy : (45-66 Hz): ±1.5% rdg ±5 dgt (60.00 mA to 6.000 A), ±2.5% rdg ±5 dgt (60.00 A to 600.0 A)
    • Frequency range : 40.0 Hz to 999.9 Hz
    • Crest factor : 4.5 (4000 counts or less)
      3 (more than 4000 counts, 6000 counts or less)
    • Filter function : Cut off frequency: 180 Hz ±30 Hz at filter ON (-3 dB)
    • Display : Display refresh rate: 5 times/s
    • Core Jaw Diameter : φ 24 mm (0.94 in)
    • Dimensions : 37 mm (1.46 in) W × 160 mm (6.30 in) H × 27 mm (1.06 in) D
    • Mass : 115 g (4.1 oz.)
    • Included Accessories : Carrying case × 1, Strap × 1, Instruction manual × 1, Operating Precautions × 1, LR03 alkaline battery × 1

    FEATURES

    • Find issues faster with comparator function
    • Identify intermittent GFCI and RCD trips to prevent unplanned equipment downtime by testing for earth leakage current
    • Measure everything from leakage to load
    • Slim jaws let you work with ease
    • Easily transfer measurement data to your smartphone or tablet by using our free app GENNECT Cross or to an Excel® file. (Wireless Adapter Z3210 is necessary)
    Read more
  • ,

    HIOKI CM-4003 AC LEAKAGE CLAMP METER (Output and external power supply function)

    SPECIFICATIONS 

    • AC Current Range : 6.000 mA, 60.00 mA, 600.0 mA, 6.000 A, 60.00 A, 200.0 A, 6 ranges, True RMS
      Accuracy : 45 Hz – 400 Hz: ±1.0% rdg ±5 dgt (6.000 mA to 6.000 A), ±1.5% rdg ±5 dgt (60.00 A, 200.0 A)
      Accuracy : 15 Hz – 45 Hz, 400 Hz – 2 kHz: ±2.0% rdg ±5 dgt
      Defined Accuracy Range : 0.060 mA to 200.0 A
    • Frequency range : 15.0 Hz to 2000 Hz
    • Crest factor : 3 (other than 200.0　A range), 1.5 (200.0　A range)
    • Filter function : Cut off frequency: 180 Hz ±30 Hz at filter ON (-3 dB)
    • Output Function : RMS (RMS value output), WAVE (waveform output)
    • Harmonic Levels : [With Z3210 installed] Current harmonic levels up to 30th, Content factor, Total harmonic distortion ratio
      *Harmonics can be displayed with our free app GENNECT Cross.
    • Display : Display refresh rate: 5 times/s
    • Core Jaw Diameter : φ 40 mm (1.57 in.)
    • Dimensions : 64 mm (2.52 in) W × 233 mm (9.17 in) H × 37 mm (1.46 in) D
    • Mass : 400 g (14.1 oz.)
    • Included Accessories : Connection Cable L9097 × 1, USB Cable × 1, Carrying case C0203 × 1, Instruction manual × 1, Operating Precautions × 1, AA-size alkaline battery (LR6) × 2

    FEATURES

    • Easily transfer measurement data to your smartphone or tablet by using our free app GENNECT Cross or to an Excel® file. (Wireless Adapter Z3210 is necessary)
    • Detect minuscule leakage currents with a newly designed sensor. (Core jaw diameter up to φ 40 mm)
    • Broad measurement range extending from leakage currents to load currents
    • Complies with the performance standard set forth in IEC/EN 61557-13, an international standard on leak clamp meters
    • Solve GFCI and RCD problems quickly
    • Speed up pass/fail judgments with the built-in comparator function
    • Output function (waveform/RMS): use with a recorder to record waveforms and fluctuations
    • External power supply: use an optional AC adapter for continuous, long-term measurement
    • CAT III 300 V
    Read more
  • ,

    HIOKI CM4002 AC LEAKAGE CLAMP METER

    SPECIFICATIONS 

    • AC Current Range : 6.000 mA, 60.00 mA, 600.0 mA, 6.000 A, 60.00 A, 200.0 A, 6 ranges, True RMS
      Accuracy : 45 Hz – 400 Hz: ±1.0% rdg ±5 dgt (6.000 mA to 6.000 A), ±1.5% rdg ±5 dgt (60.00 A, 200.0 A)
      Accuracy : 15 Hz – 45 Hz, 400 Hz – 2 kHz: ±2.0% rdg ±5 dgt
      Defined Accuracy Range :  0.060 mA to 200.0 A
    • Frequency range : 15.0 Hz to 2000 Hz
    • Crest factor : 3 (other than 200.0　A range), 1.5 (200.0　A range)
    • Filter function : Cut off frequency: 180 Hz ±30 Hz at filter ON (-3 dB)
    • Harmonic Levels : [With Z3210 installed] Current harmonic levels up to 30th, Content factor, Total harmonic distortion ratio
      *Harmonics can be displayed with our free app GENNECT Cross
    • Core Jaw Diameter : φ 40 mm (1.57 in.)
    • Dimensions : 64 mm (2.52 in) W × 233 mm (9.17 in) H × 37 mm (1.46 in) D
    • Mass : 400 g (14.1 oz.)
    • Included Accessories : Carrying case C0203 × 1, Instruction manual × 1, Operating Precautions × 1, AA-size alkaline battery (LR6) × 2

    FEATURES 

    • Easily transfer measurement data to your smartphone or tablet by using our free app GENNECT Cross or to an Excel® file. (Wireless Adapter Z3210 is necessary)
    • Complies with the performance standard set forth in IEC/EN 61557-13, an international standard on leak clamp meters
    • CAT IV 300 V
      CAT III 600 V
    • Detect minuscule leakage currents with a newly designed sensor. (Core jaw diameter up to φ 40 mm)
    • Solve GFCI and RCD problems quickly
    • Broad measurement range extending from leakage currents to load currents
    • Speed up pass/fail judgments with the built-in comparator function
    Read more
  • ,

    HTC 4 Digit LCD Display Digital Clamp Meter CL-2055

    SPECIFICATIONS

    • DC VOLTAGE : 600V
    • AC VOLTAGE : 600V
    • DC CURRENT : 80~100A
    • AC CURRENT : 80~100A
    • RESISTANCE : 10kΩ

    FEATURES

    • 4 Digit LCD Display
    • 9999 Count
    • Sample Rate : 2 times / sec
    • Peak Hold
    • Low Power Indication
    • Auto Power Off (APO)

    SPECIAL FUNCTIONS

    • Continuity Buzzer <100 Ohm
    • MAX Test Voltage 3V DC
    • Overall Protection 600V rms
    • Standard Accessories : Manual Carrying Case, Test Lead
      Dimension : 202(H) x 70(W) x 30(D)mm
    • POWER: AAA 1.5V X 2
    Read more
  • ,

    HTC CL-2054 10uA high Resolution AC Leakage Current Tester 40mA ~ 100A

     Specification

    • AC Voltage: 400V
    • AC  Current: 40mA/400mA/4A/40A/80A/80-100A
    • Resistance Range: 40-400 Ohms
    • CONTINUITY TEST : Threshold 40Ω, Continuity Beeper 2.5KHz

    FEATURES

    • 3¾ Digit Manual Range
    • 3,999 Count
    • 10uA high Resolution
    • Auto Power Off (APO)
    • Shielded Transformer Jaw Open to 1.2”
    • POWER: 9V (6F22) X 1
    • Standarrd Accesories :Hard Carrying Case, Test Lead, Manual
    • Dimension : 209(H) x 43(W) x 30(D)mm
    Read more

  • HTC CM 2000 – 600A AC Clamp Meter

    SPECIFICATION:

    • DC VOLTAGE       : 600V
    • AC VOLTAGE       : 600V
    • AC CURRENT       : 600A
    • RESISTANCE       : 20 M ohms
    • TEMPERATURE  : Range (-40~750)°C
      Resolution 1°C                                                                                                                                                                                                                                                                                                                    Accuracy – <400°C±1.0% of rdg + 5 digits
      ≥400°C±1.5% of rdg + 15 digits

     

    FEATURES:

    • 3½ Digit
    • 2000 Count
    • Non Contact Voltage (NCV)
    • Clamp Torch
    • Jaw Open: 28mm
    • Auto Power Off (APO)
    • True RMS
    Read more

  • HTC CM-2000 400A 3½ Digits AC Digital Clamp Meter

    SPECIFICATIONS

    • DC VOLTAGE : 600V
    • AC VOLTAGE : 600V
    • AC CURRENT : 600A
    • RESISTANCE : 20mΩ
    • TEMPERATURE : (-40~750)°C

    FEATURES

    • 3½ Digit
    • 2000 Count
    • Non Contact Voltage (NCV)
    • Clamp Torch
    • Jaw Open: 28mm
    • Auto Power Off (APO)
    • True RMS
    • Power: AAA 1.5V X 2
    • Standard Accessories : Test Lead, Manual, Soft Carrying Case
    • Dimension : 230(H) x 80(W) x 37(D)mm
    Read more

  • HTC CM-2007 600A AC Digital Clamp Meter

    SPECIFICATIONS

    • DC VOLTAGE : 600V
    • AC VOLTAGE : 600V
    • AC CURRENT : 800A
    • RESISTANCE : 40mΩ
    • TEMPERATURE : (-40~1000)°C
    • CAPACITANCE : 40mF
    • FREQUENCY : 10MHz

    FEATURES

    • 3¾ Digit
    • Non Contact Voltage (NCV)
    • Clamp Torch
    • Jaw Open : 28mm
    • Frequency, CAP, Temperature
    • True RMS
    • POWER: AAA 1.5V X 2
    • Standard Accessories : Test Lead, Manual, TP-04 Temperature Probe, Soft Carrying Case
    • Dimension : 270(H) x 123(W) x 35(D)mm
    Read more

  • HTC CM-2016 3 5/6 DIGIT 600A AC/DC Clamp Meter

    SPECIFICATIONS

    • DC VOLTAGE : 600V
    • AC VOLTAGE : 600V
    • AC CURRENT : 800A
    • DC CURRENT : 800A
    • RESISTANCE : 60mΩ
    • TEMPERATURE : (-40~1000)°C
    • CAPACITANCE : 6mF
    • FREQUENCY : 10MHz

    FEATURES

    • 3 5/6 Digit Clamp Meter with Backlight
    • 5,999 Count & Polarity Display
    • Clamp Torch
    • Jaw Open : 28 mm
    • Non Contact Voltage (NCV) 5 Ranges
    • True RMS
    • Auto Power Off (APO)
    • Duty Cycle /REL & Data Hold

    SPECIAL FUNCTIONS

    • Diode Test: Yes
    • Continuity Buzzer: > 50Ω+10Ω
    • Low Battery Display: Approx. > 2.6V
    • Auto Power OFF: 15 min.
    • Function Protection:Yes
    • Input impedance: 10MΩ
    • Sampling Rate: 3 times / sec.
    • AC Frequency Response: 50-400Hz
    • Power: AAA 1.5V X 2
    • Standard Accessories : Soft Carrying Case, Manual Test Lead, TP-04 Temperature Probe.
    • Dimension : 35(H) x 123(W) x 270(D)mm
    Read more

  • HTC CM-2030 3 1/2 DIGIT DIGITAL CLAMP METER

    SPECIFICATIONS

    • DC VOLTAGE : 1000V
    • AC VOLTAGE : 750V
    • AC CURRENT : 1000A
    • RESISTANCE : 200mΩ
    • TEMPERATURE : (-40~1000)°C

    FEATURES

    • 3½ Digit Clamp Meter with Backlight Manual Range
    • 1999 Count
    • Fully Protected in all RANGE
    • Jaw Open: 52mm
    • Clamp Torch
    • True RMS
    • NCV

    SPECIAL FEATURES

    • Diode Test
    • Continuity Test
    • Function Protection
    • Sampling Rate 2 or 3 times/sec
    • Input impedance 10MΩ
    • Standard Accessories : Soft Carrying Case, Manual, Test Lead
    • Dimension : 123(H) x 270(W) x 35(D)mm
    • POWER: AAA 1.5V X 2
    Read more