Showing 65–75 of 75 results

  • MECO DT-2250Hz AUTO DIGITAL CLAMPMETER

    SPECIFICATIONS : 

    • DC VOLTAGE RANGE : 4-1000 V (Auto Ranging)
    • AC VOLTAGE RANGE : 4 to 750V (Auto Ranging)
    • AC VOLTAGE : 4V, 40V, 400V, 750V (Auto) (40-500Hz)
    • DC VOLTAGE : 4V, 40V, 400V, 1000V (auto)
    • FREQUENCY  RANGE : 10 Hz, 50 Hz & 500 Hz
    • FREQUENCY ACCURACY : ±(0.5% rdg + 2 dgt)
    • RESISTANCE : 400Ω, 4KΩ, 40KΩ, 400KΩ, 4MΩ, 40MΩ (Auto)
    • DIMENSION : 250x98x35 mm

    FEATURES : 

    • Automatic.
    • 3 V Sensitivity.
    • Select Button.
    • Data Hold Button.
    • Audible Continuity Check.
    • Diode Test Functions.
    • Low Battery Indications.
    • Over Volt Protections 200V DC and AC Peak.
    • Automatic, Positive Implied, Negative Polarity Indication.
    Read more

  • MECO G R-1818T DIGITAL CLAMP METER

    SPECIFICATIONS : 

    • AC VOLTAGE : 750V
    • DC VOLTAGE : 1000V
    • AC CURRENT : 1000A
    • DC CURRENT : 1000A
    • RESISTANCE : 60M
    • CAPACITANCE : 1000µF
    • TEMPERATURE : -0 F~1832ºF

    FEATURES : 

    • DISPLAY : 3 5/6 DIGIT DISPLAY
    • POLARITY : AUTO POLARITY
    • SAMPLING RATE : 2~3 TIMES/SECOND
    • POWER : 3V BETTERY
    • JAW OPENING : 50mm

     

    Read more

  • MECO-G R-DT903A-1 DIGITAL INSULATION RESISTANCE TESTER

    SPECIFICATIONS :

    • DC VOLTAGE TEST : 0V~1000
    • AC VOLTAGE TEST : 0V~750
    • BATTERY  VOLTAGE : 1.5 V
    • RESISTANCE : 500 MW/1000 V
    •  TEMPERATURE : -10 to 50 deg C(RH £ 75%)

    FEATURES : 

    • Inbuild Protection Circuit to prevent the harm of reverse voltages.
    • LCD Back Light Function with Indicator Switch.
    • 3 Ranges of Insulation Measurement.
    Read more

  • MECO-G R-2025 DIGITAL CLAMPMETER

    SPECIFICATIONS :

    • AC VOLTAGE : 750V
    • DC VOLTAGE : 1000V
    • AC CURRENT : 200A
    • RESISTANCE : 2M ohms
    • CONTINUITY TEST : 20KHz

    FEATURES :

    • TRANSFORMER JAWS
    • TIGGER
    • DATA HOLD SWITCH
    • ROTARY SWITCH
    • 3 1/2 DIGITS DISPLAY
    • BACK LIGHT SWITCH
    • COM INPUT TERMINAL
    • V/OHM INPUT TERMINAL
    Read more

  • MECO-G R-2070C DIGITAL CLAMPMETER

    SPECIFICATIONS : 

    • AC CURRENT : 600A
    • AC VOLTAGE : 600A
    • DIODE RANGE : 1mV
    • FREQUENCY : 50Hz~400Hz
    • DIMENSION : 185mmx51mmx25mm
    • RESISTANCE : 60M ohms
    • CAPACITANCE : 1000μF

    FEATURES: 

    • Op. Current <2mA (no back light).
    • LCD Display,
    • Auto / Manual Ranging, Data Hold.
    • NCV APO, Temperature, Frequency, Max Hold.
    • Diode Test, Resistance, Duty Cycle.
    • Continuity Buzzer, Backlight, Trms.
    • Low Battery Indicated.
    Read more

  • MECO-G R-2070D DIGITAL CLAMPMETER

    SPECIFICATIONS :

    • DC CURRENT  : 600A
    • AC CURRENT : 600A
    • AC VOLTAGE : 600V
    • DC VOLTAGE : 600V
    • DISPLAY : 3 5/6 digit,6000
    • BETTERY : 9V (6F22)
    • TEMPERATURE : 600°C
    • CAPACITANCE : 1000uF
    • FREQUENCY : 10 MHz
    • RESISTANCE : 60MΩ
      FEATURES:
    • Op. Current <2mA (no back light).
    • LCD Display,
    • Auto / Manual Ranging, Data Hold.
    • NCV APO, Temperature, Frequency, Max Hold.
    • Diode Test, Resistance, Duty Cycle.
    • Continuity Buzzer, Backlight, Trms.
    • Low Battery Indicated.
    • Duty Cycle : 0.1% – 99.9%.

     

     

    Read more

  • MECO-G R-2700T DIGITAL CLAMPMETER

    SPECIFICATIONS :

    • DC VOLTAGE : 1000V
    • AC VOLTAGE : 750V
    • AC CURRENT : 300A
    • RESISTANCE : 60M ohms
    • FREQUENCY : 50⁓1KHz
    • TEMPERATURE : -40~2000℉
    • CAPACITANCE : 60nF/600nF/6µF/60µF/400µ/20mF

    FEATURES :

    • TRANSFORMER JAWS
    • TRIGGER
    • RANGE BUTTONS
    • Hz/DUTY BUTTON
    • “COM” TERMINAL
    • DATA HOLD /BCKLIGHT BUTTON
    • INPUT TERMINAL
    • FUNCTION SWITCH/RANGE SWITCH
    • SELECT BUTTON
    Read more

  • MECO-G R2025THz DIGITAL CLAMPMETER

    SPECIFICATIONS :

    • DC VOLTAGE : 1000V
    • AC VOLTAGE : 750V
    • ACCURRENT : 1000V
    • RESISTANCE : 60M ohms
    • TEMPERATURE : -40~2000℉

    FEATURES : 

    • TRANSFORMER JAWS
    • TRIGGER
    • Hz/DUTY BUTTON
    • RANGE BUTTON
    • 3 5/6 DIGIT LCD DISPLAY
    • “V” INPUT TERMINAL
    • “COM” TERMINAL
    • SELECT BUTTON
    • FUNCTION SWITCH /RANGE SWITCH
    • D. HOLD BUTTON
    Read more

  • RISH Clamp ES1000/400 AC Measure Control Record Analyze 3 ¾ Digits digital clamp meter

    SPECIFICATIONS

    • DC Voltage Range :
      Es-1000A Ac : 400 mV-1000 V
      Es-400A Ac : 400 mV-1000 V
      Accuracy : ±(0.5 % + 2 Digits)
    • AC Current Range :
      Es-1000A Ac : 0-1000 A
      Es-400A Ac : 0-400 A
      Accuracy: ±(1.5 % + 5 Digits)
    • AC Current Resolution :
      Es-1000A Ac : 100 mA / 1 A
      Es-400A Ac : 10 mA / 100 mA
    •  AC Voltage Range:
      Es-1000A Ac : 400 mV-1000 V
      Es-400A Ac : 400 mV-1000 V
      Accuracy: ±(1.0 % + 10 Digits)
    •  Resistance Accuracy: ±(2.0 % + 5 Digits)
    •  Capacitance Range: 5 nF-200 µF
      Accuracy: ±(5.0 % + 10 Digits)
    •  Frequency: 0-500 KHz
      Accuracy: ±(0.2 % + 2 Digits)
    • Temperature Range : 0° to 1300°C
      Accuracy : ±(2.0 % + 3 Digits)
    • Operating temperature :  -10 to +50°C
    • Storage temperature : -25 to +70°C
    • Relative humidity : 45…75% non condensing
    • Terminal Protection IP 52 for Housing and IP20 for terminals
    • Battery Voltage : 1.5 x 2 V AAA size batteries
    • Dimensions : 90mm (W) x 270mm (L) x 70mm (H)
    • Jaw Size : RISH Clamp ES1000 AC Jaw opening of 51mm for standard wire diameter of 50mm and for RISH Clamp ES400 AC Jaw
      opening of 41mm for standard wire diameter of 40mm for 400A
    • Weight : 0.6 Kg
    • Safety : IEC 61010-1-2010
    • IP for water & dust : IEC60529

    FEATURES

    • Large Jaw Opening : For RISH Clamp ES1000 AC Jaw opening of 51mm for standard wire diameter of 50mm and for RISH Clamp ES400 AC Jaw
      opening of 41mm for standard wire diameter of 40mm for 400A
    • Narrow Body : Narrow housing for firm grip and easy to carry.
    • High Accuracy for low current measurement : The clamp meter can measure accurately at not only the High currents but also Low current ranges.
    • User selectable Backlit : It is possible to conduct measurement using the clamp meter during night time in darkness with the help of Backlit.
    • Temperature measurement : Temperature from 0 to 1300 °C using K type thermocouple sensors.
    • AUTO POWER OFF : In order to save the power of the Batteries, the clamp meter will automatically shut OFF if it detects no activity for 15 minutes
    • Relative Measurement : By pressing REL key, the zero correction is made and relativevalue is measured. All functions can measure Relative value
      except Hz/Duty
    • Hold Function : By pressing HOLD key reading on the display can be latched. Simultaneously HOLD is displayed on display.
    • Hz / Duty : The instrument can measure frequency (Hz) and Duty cycle (%) of AC voltage by pressing yellow key in VAC function.
    • NULL ZERO Correction for Resistance : For Low ohm measurement, the lead resistance can be compensated by pressing REL key
    • Non contact voltage (NCV) detection : Presence of AC voltage >75 V AC 50/60 Hz can be detected by keeping jaws near voltage carrying conductor.
    • AUTO and MANUAL ranging modes : In AUTO ranging mode the instrument automatically selects the range with best resolution depending on the applied input. In MANUAL ranging mode range is user selectable using MAN key.
    • Diode and continuity testing : For testing diode and transistors, diode measurement function is available. Continuity test generates beep sound if resistance is less than 75 ohm
    Read more

  • RISH Clamp1000A/300A AC-DC 3 ¾ Digits TRMS 3 ¾ Digits digital Clamp meter with VFD measurement feature

    SPECIFICATIONS

    • DC Voltage Range :
      1000A Ac/Dc : 30 mV-1000 V
      300A Ac/Dc : 30 mV-1000 V
      Accuracy : ±(0.3 % + 1 Digits)
    • DC Current Range :
      1000A Ac/Dc :  0-1000 A
      300A Ac/Dc :  0-300 A
      Accuracy: ±(1.5 % + 5 Digits)
    • AC Current Range :
      1000A Ac/Dc : 0-1000 A
      300A Ac/Dc : 0-300 A
      Accuracy: ±(1.5 % + 5 Digits)
    • AC Current Resolution :
      1000A Ac/Dc : 0.1 A / 1 A
      300A Ac/Dc : 0.1 A / 1 A
    •  AC Voltage Range:
      1000A Ac/Dc : 0-1000 V
      300A Ac/Dc : 0-1000 V
      Accuracy: ±(0.75 % + 1 Digits)
    •  Resistance Accuracy: ±(0.25 % + 1 Digits)
    •  Capacitance Range: 30 nF-30 µF
    •   Accuracy: ±(3.0 % + 3 Digits)
    •  Frequency: 0-100 kHz
      Accuracy: ±(0.5 % + 1 Digits)
    • Temperature Range :  -200° to 800°C
      Accuracy : ±(1.0 % + 1)
    • Battery Voltage : 9 V DC
    • Operating temperature : -10 to +55°C
    • Storage temperature : -20 to +70°C
    • Relative humidity : 0… 90% non condensing
    • Number of digits : 3 ¾ digits.
    • Maximum count : 3100 counts
    • Weight : 0.6 Kg

    FEATURES

    • Large Jaw Opening : For RISH CLAMP 1000A AC-DC Jaw opening of 51mm for standard wire diameter of 50mm and for RISH CLAMP 300A AC-DC Jaw
      opening of 41mm for standard wire diameter of 40mm for 300A
    • Narrow Body : Narrow housing for firm grip and easy to carry.
    • High Accuracy for low current measurement : The clamp meter can measure accurately at not only the High currents but also Low current ranges.
    • User selectable Backlit : It is possible to conduct measurement using the clamp meter during night time in darkness with the help of Backlit.
    • Temperature measurement : Temperatures from -200 to 800 °C using Pt 100 and Pt 1000 sensors.
    • AUTO POWER OFF : In order to save the power of the Batteries, the clamp meter will automatically shut OFF if it detects no activity for 15 minutes
    • Analog Scale : Analog scale that updates at the rate 20 times/sec to observe fluctuations in input.
    • CONTINOUS ON MODE : In this mode, AUTO POWER OFF is disabled.
    • DATA Hold Function : By pressing DATA HOLD button, reading on the display can belatched for Hands free operation.
    • MIN,MAX Function : By pressing MIN/MAX button, the clamp meter will start recordinglatest Minimum and Maximum readings
    • NULL ZERO Correction for Resistance : For Low ohm measurement, the lead resistance can be compensated by pressing the shift key (Yellow Key)
    • NULL ZERO Correction for Capacitance : Null zero connection for capacitance. For nF range, stray capacitance can be compensated by shift key (Yellow Key)
    • AUTO and MANUAL ranging modes In AUTO ranging mode the instrument automatically selects the range with best resolution depending on the applied input. In MANUAL ranging mode range is user selectable using MAN key.
    • Diode Measurement : For testing diode and transistors, diode measurement function is available.
    Read more

  • BEETECH B-6096 Solar Clampmeter 2000A AC/DC & 2000V AC/DC

    SPECIFICATIONS:

    • DC Voltage: 2000V
    • AC Voltage: 2000V
    • DC Current: 2000A
    • AC Current: 2000A
    • Resistance: 20 M ohms
    • Capacitance: 2000uF

     

    FEATURES

    • Display Mode: Display by LCD
    • Maximum Display: 1999
    • Digits: 3 ½ Digits
    • Maximum span of jaw: 55mm
    • Auto Range
    • Inrush Current
    • Resistance
    • Capacitance
    • Diode Test
    • Continuity Test
    • Data Hold
    • LED Testing
    • Back Light + Lamp Light
    • Auto negative polarity indication: displaying ‘-’
    • Auto Power Off
    • Battery: 9V

     

    Read more