Fluke 376 True RMS AC/DC Clamp Meter with iFlex®

Brands: FLUKE

Category: CLAMPMETER

Availability: In Stock

SPECIFICATIONS

AC Current via Jaw
Range : 999.9A
Resolution : 0.1A
Accuracy : 2% ± 5 digits (10-100 Hz) ; 2.5% ± 5 digits (100-500 Hz)
AC Current via Flexible Current Probe
Range : 2500A
Resolution : 0.1 A (≤ 999.9 A) ; 1 A (≤ 2500 A)
Accuracy : 3% ±5 digits (5 – 500 Hz)
DC Current
Range : 999.9A
Resolution : 0.1 A
Accuracy : 2% ±5 digits
AC Voltage
Range : 1000V
Resolution : 0.1 V (≤ 600.0 V) ; 1 V (≤ 1000 V)
Accuracy : 1.5% ± 5 digits (20 – 500 Hz)
DC Voltage
Range : 1000V
Resolution : 0.1 V (≤ 600.0 V) ; 1 V (≤ 1000 V)
Accuracy : 1% ±5 digits
Frequency Via Jaw
Range : 5.0 – 500.0 Hz
Resolution : 0.1 Hz
Accuracy : 0.5% ± 5 digits
Frequency via Flexible Current Probe
Range : 5.0 – 500.0 Hz
Resolution : 0.1 Hz
Accuracy : 0.5% ± 5 digits
Resistance
Range : 60 kΩ
Resolution : 0.1 Ω (≤ 600 Ω) ; 1 Ω (≤ 6000 Ω) ; 10 Ω (≤ 60 kΩ)
Accuracy : 1% ± 5 digits
Capacitance
Range : 1000 μF
Resolution : 0.1 μF (≤ 100 μF) ; 1 μ F (≤ 1000 μF)
Accuracy : 1% ± 4 digits
Jaw Opening : 34mm
Flexible Current Probe Diameter : 7.5mm
Flexible Current Probe Cable Length (head to electronics connector) : 1.8M
Operating Temperature : 14°F to 122°F (-10 °C to 50 °C)
Storage Temperature : -40 °F to 140 °F (-40 °C to 60 °C)
Size : 246 mm x 83 m x 43 mm
Weight : 388g

FEATURES

iFlex^® Flexible Current Probe expands the measurement range to 2500 A AC
CAT IV 600 V, CAT III 1000 V
True RMS AC voltage and current for accurate measurements on non-linear signals
Min, max, average and Inrush recording to capture variations automatically
Integrated low pass filter and state-of-the-art signal processing allows for use in noisy electrical environments while providing stable readings
Proprietary Inrush measurement technology to filter out noise and capture motor starting current exactly as the circuit protection sees it
Ergonomic design fits in your hand and can be used while wearing protective equipment
Large, easy to read backlight display automatically sets the correct measurement range so you do not need to change the switch positions while taking a measurement
Three-year warranty
Soft Carrying Case

Category: CLAMPMETER

Description
Reviews (0)

Description

You can measure around awkward sized conductors with the Fluke 376 True RMS Clamp Meter with iFlex^®, expanding your measurement range to 2500 A AC. With True RMS voltage and current measurements, the Fluke 376 can read up to 1000 V and 1000 A in both AC and DC modes.

The Fluke 376 is the direct replacement for the Fluke 337 Clamp Meter.

Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “Fluke 376 True RMS AC/DC Clamp Meter with iFlex®”

Quick Comparison

Settings	Fluke 376 True RMS AC/DC Clamp Meter with iFlex® remove	MECO-G R-2025 DIGITAL CLAMPMETER remove	HTC CM 2000 - 600A AC Clamp Meter remove	MECO 27 AUTO BL 3.5 DIGITS DIGITAL CLAMP METER remove	BEETECH B-6096 Solar Clampmeter 2000A AC/DC & 2000V AC/DC remove	BEETECH M-266 DIGITAL CLAMP METER 1000A AC remove
Name	Fluke 376 True RMS AC/DC Clamp Meter with iFlex® remove	MECO-G R-2025 DIGITAL CLAMPMETER remove	HTC CM 2000 - 600A AC Clamp Meter remove	MECO 27 AUTO BL 3.5 DIGITS DIGITAL CLAMP METER remove	BEETECH B-6096 Solar Clampmeter 2000A AC/DC & 2000V AC/DC remove	BEETECH M-266 DIGITAL CLAMP METER 1000A AC remove
Image
SKU
Rating
Price
Stock
Availability
Add to cart	Read more	Read more	Read more	Read more	Read more	Read more
Description	SPECIFICATIONS AC Current via Jaw Range : 999.9A Resolution : 0.1A Accuracy : 2% ± 5 digits (10-100 Hz) ; 2.5% ± 5 digits (100-500 Hz) AC Current via Flexible Current Probe Range : 2500A Resolution : 0.1 A (≤ 999.9 A) ; 1 A (≤ 2500 A) Accuracy : 3% ±5 digits (5 – 500 Hz) DC Current Range : 999.9A Resolution : 0.1 A Accuracy : 2% ±5 digits AC Voltage Range : 1000V Resolution : 0.1 V (≤ 600.0 V) ; 1 V (≤ 1000 V) Accuracy : 1.5% ± 5 digits (20 – 500 Hz) DC Voltage Range : 1000V Resolution : 0.1 V (≤ 600.0 V) ; 1 V (≤ 1000 V) Accuracy : 1% ±5 digits Frequency Via Jaw Range : 5.0 - 500.0 Hz Resolution : 0.1 Hz Accuracy : 0.5% ± 5 digits Frequency via Flexible Current Probe Range : 5.0 - 500.0 Hz Resolution : 0.1 Hz Accuracy : 0.5% ± 5 digits Resistance Range : 60 kΩ Resolution : 0.1 Ω (≤ 600 Ω) ; 1 Ω (≤ 6000 Ω) ; 10 Ω (≤ 60 kΩ) Accuracy : 1% ± 5 digits Capacitance Range : 1000 μF Resolution : 0.1 μF (≤ 100 μF) ; 1 μ F (≤ 1000 μF) Accuracy : 1% ± 4 digits Jaw Opening : 34mm Flexible Current Probe Diameter : 7.5mm Flexible Current Probe Cable Length (head to electronics connector) : 1.8M Operating Temperature : 14°F to 122°F (-10 °C to 50 °C) Storage Temperature : -40 °F to 140 °F (-40 °C to 60 °C) Size : 246 mm x 83 m x 43 mm Weight : 388g FEATURES iFlex^® Flexible Current Probe expands the measurement range to 2500 A AC CAT IV 600 V, CAT III 1000 V True RMS AC voltage and current for accurate measurements on non-linear signals Min, max, average and Inrush recording to capture variations automatically Integrated low pass filter and state-of-the-art signal processing allows for use in noisy electrical environments while providing stable readings Proprietary Inrush measurement technology to filter out noise and capture motor starting current exactly as the circuit protection sees it Ergonomic design fits in your hand and can be used while wearing protective equipment Large, easy to read backlight display automatically sets the correct measurement range so you do not need to change the switch positions while taking a measurement Three-year warranty Soft Carrying Case	SPECIFICATIONS : AC VOLTAGE : 750V DC VOLTAGE : 1000V AC CURRENT : 200A RESISTANCE : 2M ohms CONTINUITY TEST : 20KHz FEATURES : TRANSFORMER JAWS TIGGER DATA HOLD SWITCH ROTARY SWITCH 3 1/2 DIGITS DISPLAY BACK LIGHT SWITCH COM INPUT TERMINAL V/OHM INPUT TERMINAL	SPECIFICATION: DC VOLTAGE : 600V AC VOLTAGE : 600V AC CURRENT : 600A RESISTANCE : 20 M ohms TEMPERATURE : Range (-40~750)°C Resolution 1°C Accuracy - <400°C±1.0% of rdg + 5 digits ≥400°C±1.5% of rdg + 15 digits FEATURES: 3½ Digit 2000 Count Non Contact Voltage (NCV) Clamp Torch Jaw Open: 28mm Auto Power Off (APO) True RMS	SPECIFICATIONS : DC VOLTAGE : 600V AC VOLTAGE : 600V AC CURRENT : 400A RESISTANCE : 20MV STORAGE TEMPERATURE : -20°C to 60°C, 0 to 80% R.H. OPERATING ENVIORNMENT : 0°C to 50°C at < 70% relative humidity. Dimensions : 185 x 65 x 28mm Weight : 170gms including battery. FEATURES: DISPLAY : 3½ digit liquid crystal display (LCD) LOW BATTERY INDICATION : is displayed when the battery voltage drops below the operating level. Weight : 170gms including battery (approx.) Maximum Jaw : 25mm	SPECIFICATIONS: DC Voltage: 2000V AC Voltage: 2000V DC Current: 2000A AC Current: 2000A Resistance: 20 M ohms Capacitance: 2000uF FEATURES Display Mode: Display by LCD Maximum Display: 1999 Digits: 3 ½ Digits Maximum span of jaw: 55mm Auto Range Inrush Current Resistance Capacitance Diode Test Continuity Test Data Hold LED Testing Back Light + Lamp Light Auto negative polarity indication: displaying ‘-’ Auto Power Off Battery: 9V	SPECIFICATION AC current : 1000A AC Voltage : 750V DC Voltage : 1000V Resistance : 20KΩ Insulation test : 2000MΩ Audible continuity : Overload Protection 15s maximum 250Vrms FEATURES Display Mode: 3 1/2 LCD Maximum Display: 1999, 0.5” high Maximum Span of Jaw: 53mm Auto Polarity Indication: Displaying “-”, assumed “+” Sampling speed: 2 times/s Over-load indication: “1” is displayed Low battery indication Power supply: 9V Dimensions: 230 x 68 x 37mm Weight: ≈ 240g (battery included) Static electricity: ≈ 4mA Operating environment: 0˚C ~ 40˚C, at <80% RH Storage environment: -10 ˚C ~ 50˚C at <85% RH
Content	You can measure around awkward sized conductors with the Fluke 376 True RMS Clamp Meter with iFlex^®, expanding your measurement range to 2500 A AC. With True RMS voltage and current measurements, the Fluke 376 can read up to 1000 V and 1000 A in both AC and DC modes. The Fluke 376 is the direct replacement for the Fluke 337 Clamp Meter.	The MECO-G 1000A AC Digital Auto Ranging Clamp Meter is a great choice for those who need a reliable and accurate clamp meter. It features a large jaw opening for easy clamping, auto ranging for easy use, and a backlit LCD display for easy reading. The MECO-G clamp meter is a great choice for measuring dc voltage and current, as well as ac current. It has a range of 600mV to 6V, 60V to 600V, and 1000V, making it suitable for a variety of applications. The ac current range is 60A to 600A, and 1000A, with an accuracy of (2.5% of reading + 10 digits). The clamp meter also features a resistance accuracy of (1.5% of reading + 5 digits).	HTC Brand best quality Digital 3 ½ digits 600A clamp tester model CM-2000 having AC Voltage from 200mV to 600V, DC Voltage from 200mV to 600v (auto ranging), Ac current in four ranges (0-2-20-200-600A), Resistance (auto ranging) from 0- 20 M.Ohms, with NCV test, Diode test, sound buzzer in continuity, data hold, clamp led light. Instrument is supplied with carrying case, test probes, installed 1.5v cells and instruction manual.	This Meco Digital Clamp Meter is an auto-ranging clamp meter having a massive 2000 count of 3.5 digits. In addition, one of the biggest advantages of this automated Meco clamp meter is that it can hold a large quantity of data too. The clamp meter has an LCD display and also comes with an auto power-off function. It displays OT and -OI both, and this clamp meter has a function button, hold button and max button. This clamp meter is automatic, positive implied and negative polarity indication.	B-6096 is a 2000V AC/DC and 2000A AC/DC TRUE RMS Digital Clamp meter. It adopts high performance MCU processor. It is of great value as it has high reliability, accuracy, quality and automatic setting range function. The product has a large digital display, full range overload protection, data hold function, under voltage detection, auto shut off function. The TRUE RMS function can accurately measure frequency voltage, suitable for measuring motor and compressor starting current. Along with AC/DC current, AC/DC voltage it can measure resistance, capacitance, continuity test, diode forward voltage drop, LED operating voltage, and other parameters. This instrument is easy to operate and carry making it an ideal tool for electrical measurement. Especially suitable for measuring large currents and starting currents.	BEETECH M266 Digital AC Clamp Meter is a versatile and easy-to-use clamp meter that can measure AC current, AC/DC voltage, resistance, and continuity. It is perfect for use in a variety of applications, including electrical maintenance, HVAC/R, automotive, and more. The clamp meter is a precision instrument that is perfect for a wide range of applications. It is affordably priced and has exceptional quality. This clamp meter is easy to use and has a wide variety of features that make it perfect for any measuring need.
Weight
Dimensions	N/A	N/A	N/A	N/A	N/A	N/A
Additional information