SPECIFICATIONS

• AC Volts
  Range : 1000V
  Resolution : 1 V
  Accuracy : 1.0% + 3
• DC Volts
  Range : 1000V
  Resolution : 1 V
  Accuracy : 0.5% + 3
• Resistance
  Range : 40.00 MΩ
  Resolution : 0.01 MΩ
  Accuracy : 1.5% + 3
• Capacitance
  Range : 1000 μF
  Resolution : 1 μF
  Accuracy : 5% + 5
• Frequency :
  Range : 100.0 kHz
  Resolution : 0.01 kHz
  Accuracy : 0.1% + 3
• Temperature : – 55 °C To 400 °C
• Display : 4000 counts, updates 3/sec
• IP Rating : IP 40
• Safety : IEC 61010-1, IEC61010-2-030 CAT III 600 V, CAT II 1000 V, Pollution Degree 2

FEATURES

• 600 V Cat III safety rating
• 50% bigger display with bright white backlight
• Over-voltage indicator
• Frequency and temperature measurement
• Voltage, resistance, continuity, capacitance
• Input terminal for ac and dc current measurements to 10 A current
• Diode test, data hold

SPECIFICATIONS

• DC Voltage range : 600.0 mV to 1700 V (*1) 5 ranges
  Accuracy : ±0.3 % rdg. ±3 dgt.
• AC Voltage range : 6.000 V to 1000 V, 4 ranges, Frequency characteristics: 40 Hz – 1 kHz
  Accuracy : 40 – 500 Hz : ±0.9 % rdg. ±3 dgt. (True RMS, crest factor 3)
• Voltage Detection : Hi: AC40 V to 600 V, Lo: AC80 V to 600 V
• Frequency Range : 99.99 Hz to 99.99 kHz, 4 ranges (limited by the minimum detectable voltage),
  Basic accuracy : ±0.1 % rdg. ±1 dgt.
• Display : Main and sub displays: 4-digits LCD, max. 6000 digits, bar graph
• Display Refresh Rate : 5 times/s (Capacitance measurement: 0.05 to 5 times/s, depending on measured value, Frequency: 1 to 2 time/s, Temperature: 1 time/s )
• Dimensions : 84 mm (3.31 in)W × 174 mm (6.85 in)H× 52 mm (2.05 in)D
• Mass : 390 g (13.8 oz) (including batteries and holster)
• Including Accessories : Test lead L9207-10 ×1, Holster ×1, Instruction manual ×1, LR03 alkaline battery ×4

FEATURES

• The voltage measurement model, which is ideal for solar power system and power equipment management, measures up to 1700 V DC (*1) during open voltage inspections (DT4254)
• Low-pass filter cuts high harmonics (when measuring inverter fundamental waveforms)
• Prevents accidents with clamp-on sensor-based current measurement (DT4254, DT4255)
• Broad -25°C (-13°F) to 65°C (149°F) operating temperature range (DT4254, DT4255)
• Voltage detection function (DT4254, DT4255)
• Dual display lets you check voltage and frequency simultaneously

SPECIFICATIONS 

• DC Voltage range : 600.0 mV to 1000 V , 5 ranges
  Accuracy : ±0.15 % rdg. ±2 dgt.
• AC Voltage range : 6.000 V to 1000 V, 4 ranges, Frequency characteristics: 40 Hz – 1 kHz
  Accuracy : 40 – 500 Hz : ±0.9 % rdg. ±3 dgt. (True RMS, crest factor 3 Or less)
• AC+ DC Voltage range : 6.000 V to 1000 V, 4 ranges, Frequency characteristics: DC, 40 Hz to 1 kHz
  Accuracy : DC, 40 Hz – 500 Hz: ±1.0% rdg. ±13 dgt. (True RMS, crest factor 3 or less)
• DC Current range : 600.0 mA to 10.00 A, 3 ranges,
  Accuracy : ±0.5 % rdg. ±3 dgt.
• AC Current range : 600.0 mA to 10.00 A, 3 ranges,
  Accuracy : 40 – 500 Hz : ±1.4 % rdg. ±3 dgt. (True RMS, crest factor 3 or less)
• Resistance range : 600.0 Ω to 60.00 MΩ, 6 ranges,
  Basic accuracy: ±0.7 % rdg. ±3 dgt.
• AC Current Range ( use with Clamp on probes ) : 10.00 A to 1000 A, 7 ranges,
  Basic accuracy 40 Hz – 500 Hz: Add the Clamp on probe accuracy to ±0.9% rdg. ±3 dgt.
  (True RMS, crest factor 3 or less)
• Capacitance Range : 1.000 μF to 10.00 mF, 5 ranges
  Accuracy : ±1.9 % rdg. ±5 dgt.
• Continuity check : Continuity threshold [ON]: 25 Ω or less , [OFF]: 245 Ω or more, Response time: 0.5 ms or more
• Diode Test : Open terminal voltage: 2.0 V or less, Testing current: 0.2 mA or less, Threshold of forward voltage: 0.15 V to 1.8 V
• Voltage frequency range : 99.99 Hz to 99.99 kHz, 4 ranges (Limited by minimum sensitivity voltage)
  Basic accuracy: ±0.1% rdg. ±1 dgt.
• Current frequency range : 99.99 Hz to 9.999 kHz, 3 ranges (Limited by minimum sensitivity current)
  Basic accuracy: ±0.1% rdg. ±1 dgt.
• Display : Main and sub displays: 4-digits LCD, max. 6000 digits, bar graph
• Display Refresh Rate : 5 times/s (Capacitance measurement: 0.05 to 5 times/s, depending on measured value, Frequency: 1 to 2 time/s, Temperature: 1 time/s )
• Dimensions : 87 mm (3.43 in.) W × 185 mm (7.28 in.) H × 47 mm (1.85 in.) D
• Mass : 480 g (16.9 oz.) (with test leads holder and batteries)
• Including Accessories : Test Lead L9300 × 1, Instruction Manual × 1, LR6 (AA) alkaline battery × 3, Operating Precautions ×1

FEATURES

• Helping personnel analyze issues in the field
• Stop worrying about losing test lead caps
• Boost work efficiency with digitalization (Excel® Direct Input Function)
• Excellent dust and water resistance (compliant with the IP54 international standard)
• Ensuring safety by preventing erroneous test lead insertion (terminal shutters)
• Harmonic levels : [With Z3210 installed] Voltage/Current harmonic levels up to 30th, Content factor, Total harmonic distortion ratio
  *Harmonics can be displayed with our free app GENNECT Cross.
• Other Functions : Mis-insertion prevention shutters, fuse check function, user setting retention function, filter function, zero-adjustment, display value hold, auto hold, MAX/MIN value display, PEAK value display, auto-power save, USB communication (when optional Communication Package DT4900-01 is installed), wireless communication (when optional Wireless Adapter Z3210 is installed)

SPECIFICATIONS

• DC VOLTAGE : 1000V
• AC VOLTAGE : 750V
• DC CURRENT : 10A
• AC CURRENT : 10A
• FREQUENCY / DUTY : 10kHz
• RESISTANCE : 60MΩ
• CAPACITANCE : 1000µF
• TEMPERATURE : 752~1832°F

FEATURES

• 3⅚ Digit
• 6000 Count
• Dual LCD with Bargraph
• Live test (sound and light alarm)
• NCV
• True RMS
• Double color backlight
• Torch
• Diode Test
• Continuity Buzzer
• Power AA 1.5V X 2