HIOKI DT-4254 Digital Multimeter

Brands:
Category:

Availability: In Stock

SPECIFICATIONS

  • DC Voltage range : 600.0 mV to 1700 V (*1) 5 ranges
    Accuracy : ±0.3 % rdg. ±3 dgt.
  • AC Voltage range : 6.000 V to 1000 V, 4 ranges, Frequency characteristics: 40 Hz – 1 kHz
    Accuracy : 40 – 500 Hz : ±0.9 % rdg. ±3 dgt. (True RMS, crest factor 3)
  • Voltage Detection : Hi: AC40 V to 600 V, Lo: AC80 V to 600 V
  • Frequency Range : 99.99 Hz to 99.99 kHz, 4 ranges (limited by the minimum detectable voltage),
    Basic accuracy : ±0.1 % rdg. ±1 dgt.
  • Display : Main and sub displays: 4-digits LCD, max. 6000 digits, bar graph
  • Display Refresh Rate : 5 times/s (Capacitance measurement: 0.05 to 5 times/s, depending on measured value, Frequency: 1 to 2 time/s, Temperature: 1 time/s )
  • Dimensions : 84 mm (3.31 in)W × 174 mm (6.85 in)H× 52 mm (2.05 in)D
  • Mass : 390 g (13.8 oz) (including batteries and holster)
  • Including Accessories : Test lead L9207-10 ×1, Holster ×1, Instruction manual ×1, LR03 alkaline battery ×4

FEATURES

  • The voltage measurement model, which is ideal for solar power system and power equipment management, measures up to 1700 V DC (*1) during open voltage inspections (DT4254)
  • Low-pass filter cuts high harmonics (when measuring inverter fundamental waveforms)
  • Prevents accidents with clamp-on sensor-based current measurement (DT4254, DT4255)
  • Broad -25°C (-13°F) to 65°C (149°F) operating temperature range (DT4254, DT4255)
  • Voltage detection function (DT4254, DT4255)
  • Dual display lets you check voltage and frequency simultaneously
Category:

Description

The DT-4200 Hioki  Digital Multimeter Series consist of a complete lineup of 9 models ranging from professional to industrial to pocket meters, delivering a super fast response rate and safety features that take electrical testing to a higher level. The DT4254 is a voltage measurement only model designed for measuring photovoltaic modules and other high-voltage targets up to 1700 V DC (*1).

Reviews

There are no reviews yet.

Be the first to review “HIOKI DT-4254 Digital Multimeter”

Your email address will not be published. Required fields are marked *

Quick Comparison

SettingsHIOKI DT-4254 Digital Multimeter removeMECO 171B+ TRMS DIGITAL MULTIMETER removeMECO 108B+ TRMS DIGITAL MULTIMETER removeMECO 801 AUTO DIGITAL MULTIMETER removeMECO 153B+ TRMS DIGITAL MULTIMETER removeBEETECH H-901 3 1/2 1000V / 750V AC 20A AC/DC DIGITAL MULTIMETER remove
NameHIOKI DT-4254 Digital Multimeter removeMECO 171B+ TRMS DIGITAL MULTIMETER removeMECO 108B+ TRMS DIGITAL MULTIMETER removeMECO 801 AUTO DIGITAL MULTIMETER removeMECO 153B+ TRMS DIGITAL MULTIMETER removeBEETECH H-901 3 1/2 1000V / 750V AC 20A AC/DC DIGITAL MULTIMETER remove
Image
SKU
Rating
Price
Stock
Availability
Add to cart

Read more

Read more

Read more

Read more

Read more

Read more

DescriptionSPECIFICATIONS
  • DC Voltage range : 600.0 mV to 1700 V (*1) 5 ranges Accuracy : ±0.3 % rdg. ±3 dgt.
  • AC Voltage range : 6.000 V to 1000 V, 4 ranges, Frequency characteristics: 40 Hz - 1 kHz Accuracy : 40 - 500 Hz : ±0.9 % rdg. ±3 dgt. (True RMS, crest factor 3)
  • Voltage Detection : Hi: AC40 V to 600 V, Lo: AC80 V to 600 V
  • Frequency Range : 99.99 Hz to 99.99 kHz, 4 ranges (limited by the minimum detectable voltage), Basic accuracy : ±0.1 % rdg. ±1 dgt.
  • Display : Main and sub displays: 4-digits LCD, max. 6000 digits, bar graph
  • Display Refresh Rate : 5 times/s (Capacitance measurement: 0.05 to 5 times/s, depending on measured value, Frequency: 1 to 2 time/s, Temperature: 1 time/s )
  • Dimensions : 84 mm (3.31 in)W × 174 mm (6.85 in)H× 52 mm (2.05 in)D
  • Mass : 390 g (13.8 oz) (including batteries and holster)
  • Including Accessories : Test lead L9207-10 ×1, Holster ×1, Instruction manual ×1, LR03 alkaline battery ×4
FEATURES
  • The voltage measurement model, which is ideal for solar power system and power equipment management, measures up to 1700 V DC (*1) during open voltage inspections (DT4254)
  • Low-pass filter cuts high harmonics (when measuring inverter fundamental waveforms)
  • Prevents accidents with clamp-on sensor-based current measurement (DT4254, DT4255)
  • Broad -25°C (-13°F) to 65°C (149°F) operating temperature range (DT4254, DT4255)
  • Voltage detection function (DT4254, DT4255)
  • Dual display lets you check voltage and frequency simultaneously
SPECIFICATIONS : 
  • AC VOLTAGE : 600 MV / 6 / 60 / 600 /750 v
  • DC VOLTAGE : 600 Mv /6 / 60 / 600 / 1000v
  • AC CURRENT : 600 / 6000 µA / 60 / 600 mA / 6 / 20 A
  • DC CURRENT : 600 / 6000 µA / 60 / 600 mA / 6 / 20 A
  • FREQUENCY : 99.99 Hz ~ 20.00 MHz
  • RESISTANCE : 600 ohm / 6 / 60 / 600 k ohm / 6 / 60 M ohm
  • TEMPERATURE : - 40°C ~ 1000°C / - 40°F ~ 1832°F
FEATURES : 
  • Model : 171B + TRMS
  • Display : 3 5/6 digit
  • Counts : 6000 digits
SPECIFICATIONS
  • DC VOLTAGE : 60mV-1000V
  • AC VOLTAGE : 60mV-1000V
  • AC CURRENT : ±(1.5% rdg + 3 dgt)
  • DC CURRENT : 60mA-10A
  • DC ACCURACY : ±(1% rdg + 10 dgt)
  • AC ACCURACY : ±(3% rdg + 3 dgt)
  • TEMPERATURE : ±(1.5% rdg + 15 dgt)
  • FREQUENCY : ±(0.08% rdg + 2 dgt)
  • RESISTANCE : 600Ω-60MΩ
FEATURES :
  • Low Battery is Indication.
  • Small Lightweight Design for One-Handed Use.
  • Pocket Size, Back Light Display, Diode & Continuity Test with Buzzer.
SPCIFICATIONS : 
  • AC CURRENT : 400µA / 4000µA / 40mA / 400mA / 4 / 20A
  • DC CURRENT : 400µA / 4000µA / 40mA / 400mA / 4 / 20A
  • DC VOLTAGE : 400mV / 4 / 40 / 400 / 1000V
  • AC VOLTAGE : 4 / 40 / 400 / 750V
  • TEMPERATURE : -20°C ~ 1300°C
  • RESISTANCE : 400Ω / 4kΩ / 40kΩ / 400kΩ / 4MΩ / 40MΩ
  • CAPACITANCE : 40 / 400nF / 4 /40 /100 uF
  • FREQUENCY : 9.999 Hz-9.999 MHz
FEATURES : 
  • Auto / Manual, 3 Digit, 3999 Count LCD, with APO, Capacitance, Frequency, Duty Cycle & Temperature.
  • Diode Test, Audible Continuity, Data Hold.
SPECIFICATIONS :
  • AC VOLTAGE : 60 to 600mV, 6 to 750 V
  • DC VOLTAGE : 600 mV6/60/600/1000 V
  • AC CURRENT : 600, 6000A, 60, 600mA, 6 & 20 Amp
  • DC CURRENT : 600Amp, 6000Amp, 60mA, 600mA, 6 & 20 Amp
  • SENSITIVITY : 1 to 36 V AC
  • RESISTANCE : 600/6/60/600 K6/60 M
  • FREQUENCY : 99.99Hz to 10 MHz
FEATURES :
  • Has Trms Sensor Type.
  • Easy to Carry.
  • Auto Power Off.
  • Audible Continuity.
  • Lcd with Backlight.
  • Diode Test, Audible Continuity, Data Hold.
  • It can Measure High Voltage.
  • The Upper Limit of the Frequency if 20 MHz.
SPECIFICATIONS
  • DC Voltage : 1000V
  • AC Voltage : 750V
  • DCA : 20A
  • ACA : 20A
  • Capacitance : 200uF
  • Resistance : 2000MΩ
  • Frequency: 200kHz
  • Temperature : -20°C to 1000°C
FEATURES
  •  Display Mode: 31/2 LCD display
  •  Maximum Display: 1999, updates every 2-3s
  •  Measuring method: Dual – slope integration A/D converter
  •  AC & DC Voltage
  •  AC & DC Current
  •  Capacitance
  •  Resistance
  •  Frequency
  •  Temperature
  •  Over range display: “1” displayed
  •  Low battery indication:
  •  Polarity indication: “-” displayed for negative polarity
  •  Display Mode: 31/2 LCD display
  •  Maximum Display: 1999, updates every 2-3s
  •  Measuring method: Dual – slope integration A/D converter
  •  AC & DC Voltage
  •  AC & DC Current
  •  Capacitance
  •  Resistance
  •  Frequency
  •  Temperature
  •  Over range display: “1” displayed
  •  Low battery indication:
  •  Polarity indication: “-” displayed for negative polarity
  •  Power supply: 9V
  •  Dimensions: 189(L) x 91(W) x 31.5mm(H)
  •  Weight: ≈ 280g (battery included)
  •  Operating environment: 0˚C ~ 40˚C
  •  Storage environment: -10˚C ~ 50˚C
  •  Accuracies are guaranteed for 1 year, 18˚C - 28 ˚C , less than 80% RH
  •  Fuse protection: F 500mA/250V
  •  Maximum voltage between terminals and earth ground: 1000VDC or 700VAC
ContentThe DT-4200 Hioki  Digital Multimeter Series consist of a complete lineup of 9 models ranging from professional to industrial to pocket meters, delivering a super fast response rate and safety features that take electrical testing to a higher level. The DT4254 is a voltage measurement only model designed for measuring photovoltaic modules and other high-voltage targets up to 1700 V DC (*1).The MECO 171B + TRMS digital multimeter is ideal for measuring multiple electrical values, primarily, voltage (volts or V), current (ampere or A) and resistance (ohms or Ω). It is a very useful electrical power testing tool for students and technicians, especially in the electrical industries. This is one among the most preferred testing and measuring equipments as it generates faultless results in values like AC/DC voltage, AC/DC current, resistance and capacitance. Try the MECO 3 5/6 Digits 6000 Counts Autoranging Digital Multimeter for meeting all your electrical measuring needs with a battery life of 200 hours. MECO digital multimeters also come with a pair of test leads, holster, and K type thermocouples.Meco 108B+ TRMS Auto ranging Digital Multimeter 60mV to 1000V AC/DC is a reliable and accurate multimeter that can be used to measure AC/DC voltage, current, and resistance. It is easy to use and has a large LCD screen that makes it easy to read. This Meco Digital Multimeter is a great addition to any tool box. It has a large, easy-to-read 3 5/6 digit LCD display with backlight, and is auto ranging. It can measure DC voltage up to 600V, DC current up to 10A, AC voltage up to 600V, and resistance up to 60M??. It is also TRMS and has a data hold function. This multimeter is perfect for any electrician, electronics technician, or anyone who needs to test voltage, current, or resistance. The Multimeters are the perfect tools for measuring and testing. With dimensions of 130x65x32 mm, they are easy to handle and use.Meco Digital Multimeter 801 Auto is suitable for conducting diode tests. It comes with audible continuity and data hold features. The multimeter is equipped with auto/manual 3 digit 3999 count LCD with duty cycle temperature capacitance frequency and APO.Meco Digital Multimeter 801 Auto is suitable for conducting diode tests. It comes with audible continuity and data hold features. The multimeter is equipped with auto/manual 3 digit 3999 count LCD with duty cycle temperature capacitance frequency and APO.The Meco Autoranging Digital Multimeter is a top-of-the-line device that is best for electricians, technicians, and engineers. It offers a wide range of features, including autoranging, data hold, and a large LCD screen. The Meco MT6000 digital multimeter is a handheld device that is used to measure voltage, current, and resistance. It has a 3 digit LCD display and dimensions of 180x90x52 mm. The device can measure voltages from 60 to 1000 V, currents from 6 to 6000 mA, and resistances from 600 to 60000 ohms. With practical features like a backlight and multiple measurement ranges, this meter is best for use in a variety of applications.The meter is a hand held 3 ½ digital multimeter for measuring DC and AC voltage, DC and AC current, resistance, diode, transistor, frequency, temperature, capacitance and continuity test with battery operated. The back light of display is optional. This multimeter is designed according to IEC – 1010 concerning electronic measuring instruments with an overvoltage category (CATII) and pollution 2.
Weight
DimensionsN/AN/AN/AN/AN/AN/A
Additional information

Related products