| Description | SPECIFICATIONS
- DC Voltage range : 600.0 mV to 1000 V, 5 ranges
Accuracy : ±0.3 % rdg. ±5 dgt.
- AC Voltage range : 6.000 V to 1000 V, 4 ranges, Frequency characteristics: 40 Hz - 1 kHz
Accuracy : 40 - 500 Hz : ±0.9 % rdg. ±3 dgt. (True RMS, crest factor 3)
- Resistance range : 600.0 Ω to 60.00 MΩ, 6 ranges
Basic Accuracy : ±0.7 % rdg. ±5 dg
- DC Current range : 60.00 μA to 60.00 mA, 4 ranges
Accuracy : ±0.8 % rdg. ±5 dgt.
- AC Current range : 10.00 A to 1000 A, 7 range
Accuracy : 40 - 1 kHz : ±0.9 % rdg. ±3 dgt. (True RMS, crest factor 3)
- Capacitance Range : 1.000 μF to 10.00 mF, 5 ranges
Accuracy : ±1.9 % rdg. ±5 dgt.
- Frequency Range : 99.99 Hz to 99.99 kHz, 4 ranges (limited by the minimum detectable voltage)
Accuracy : ±0.1 % rdg. ±1 dgt.
- Continuity Check : Continuity threshold [ON]: 25 Ω or less (Indicate buzzer sound, red LED), [OFF]: 245 Ω or more Response time: 0.5 ms or more
- Diode Test : Open terminal voltage: 5.0 V or less, Testing current 0.5 mA or less, Threshold of forward voltage: 0.15 V to 1.5 V
- Display : Main and sub displays: 4-digits LCD, max. 6000 digits, bar graph
- Display Refresh Rate : 5 times/s (Capacitance measurement: 0.05 to 5 times/s, depending on measured value, Frequency: 1 to 2 time/s, Temperature: 1 time/s )
- Dimensions : 84 mm (3.31 in)W × 174 mm (6.85 in)H× 52 mm (2.05 in)D
- Mass : 390 g (13.8 oz) (including batteries and holster)
- Including Accessories : Test lead L9207-10 ×1, Holster ×1, Instruction manual ×1, LR03 alkaline battery ×4
FEATURES
- Ideal for measuring currents ranging from instrumentation signals (4 to 20 mA) to flame currents (μA) with built in high-sensitivity current ranges (DT4253)
- Low-pass filter cuts high harmonics (when measuring inverter fundamental waveforms)
- Dual display lets you check voltage and frequency simultaneously
| SPECIFICATIONS
- DC VOLTAGE RANGE : 1000V
- AC VOLTAGE RANGE : 750V
- RESISTANCE RANGE : 200MΩ
- DC CURRENT RANGE : 10A
- AC CURRENT RANGE : 10A
- TRANSISTOR hFE TEST : NPN or PNP
FEATURES
- 3½ Digit Manual Multimeter with Backlight
- Large LCD display with manual range
- Auto Power Off (APO) under natural operation
- Full protection in all Ranges.
| SPECIFICATIONS
- DC Voltage : 600V
- AC Voltage : 600V
- DCA : 10A
- Resistance : 2MΩ
- Transistor hFE test : Vce = 3V
FEATURES
- Display Mode: 3 ½ digit, 7 segment LCD display
- Maximum Display: 1999
- AC & DC Voltage
- DC Current
- Resistance
- Temperature
- Transistor Hfe Test
- Diode & Continuity Test
- Polarity indication: “-” displayed for negative polarity
- Low battery indication:
- Over range indication: “1” displayed
- Auto Power Off
- Back light optional
- Power supply: 9V NEDA 1604 or 6F22 battery
- Dimensions: 138(L) x 69(W) x 31mm(H)
- Weight: ≈ 170g (battery included)
- Operating environment: 0˚C ~ 40˚C, at <80% RH
- Accuracies are guaranteed for 1 year, 18˚C to 28˚C , less than 80% RH
| SPECIFICATIONS :
- AC VOLTAGE : 600 MV / 6 / 60 / 600 /750 v
- DC VOLTAGE : 600 Mv /6 / 60 / 600 / 1000v
- AC CURRENT : 600 / 6000 µA / 60 / 600 mA / 6 / 20 A
- DC CURRENT : 600 / 6000 µA / 60 / 600 mA / 6 / 20 A
- FREQUENCY : 99.99 Hz ~ 20.00 MHz
- RESISTANCE : 600 ohm / 6 / 60 / 600 k ohm / 6 / 60 M ohm
- TEMPERATURE : - 40°C ~ 1000°C / - 40°F ~ 1832°F
FEATURES :
- Model : 171B + TRMS
- Display : 3 5/6 digit
- Counts : 6000 digits
| SPECIFICATIONS :
- AC VOLTAGE : 60 to 600mV, 6 to 750 V
- DC VOLTAGE : 600 mV6/60/600/1000 V
- AC CURRENT : 600, 6000A, 60, 600mA, 6 & 20 Amp
- DC CURRENT : 600Amp, 6000Amp, 60mA, 600mA, 6 & 20 Amp
- SENSITIVITY : 1 to 36 V AC
- RESISTANCE : 600/6/60/600 K6/60 M
- FREQUENCY : 99.99Hz to 10 MHz
FEATURES :
- Has Trms Sensor Type.
- Easy to Carry.
- Auto Power Off.
- Audible Continuity.
- Lcd with Backlight.
- Diode Test, Audible Continuity, Data Hold.
- It can Measure High Voltage.
- The Upper Limit of the Frequency if 20 MHz.
| SPECIFICATIONS :
- DC VOLTAGE : 600mV-600V
- AC VOLTAGE : 600mV to 600V
- AC CURRENT : 600µA-10A
- DC CURRENT : 600µA-10A
- DISPLAY : 3⅚ Digit
- DC CURRENT ACCURACY : ± (1.5% + 5dgts)
- AC CURRENT ACCURACY : ± (1.5% + 7dgts)
- TEMPERATURE : -40°C - 1000°C
- FREQUENCY : ± (0.5% + 3dgts)
- RESISTANCE : 600Ω-60MΩ
FEATURES :
- Auto/Manual Ranging..
- Data Hold..
- NCV APO, Battery & Temperature Check.
- Max Hold..
- Diode Test..
- HFE Test, TRMS..
- Duty Cycle - 0.01% - 99.9%..
- Audible Continuity Test..
|
| Content | The DT-4200 Hioki Digital Multimeter Series consist of a complete lineup of 9 models ranging from professional to industrial to pocket meters, delivering a super fast response rate and safety features that take electrical testing to a higher level. The DT4253 is a digital multimeter designed specifically for HVAC testing, with ±0.5% DC V accuracy, temperature and clamp sensor testing, and wide 40 Hz to 1 kHz bandwidth. | A multimeter is a device that measures electric variables such as voltage current and resistance A typical multimeter is capable of combining all such measuring functions in single equipment It is also known as a VOM (Volt Ohm millimeter) Previously, analog meters were used by the electrical experts but now digital multimeters have replaced them as they are able to give more accurate results The HTC 0-750 basic digital multimeter offers reliable measurements to the modern electricians working in both residential and commercial segments Also, it helps technicians working on field with heating and air conditioning equipment as well | The instrument of this series is a small hand-held 3 ½ digital multimeter featuring stable, highly reliable and anti-drop performance. It is provided with a LCD display of 15mm height for clear reading. The circuit design takes LSI double integral A/D converter as its core under the protection of an overload protection circuit, making it a superior and handy instrument. It can be used to measure DC and AC voltage, DC current, resistance, diodes, transistors, temperature and for in-circuit continuity test. | The MECO 171B + TRMS digital multimeter is ideal for measuring multiple electrical values, primarily, voltage (volts or V), current (ampere or A) and resistance (ohms or Ω). It is a very useful electrical power testing tool for students and technicians, especially in the electrical industries. This is one among the most preferred testing and measuring equipments as it generates faultless results in values like AC/DC voltage, AC/DC current, resistance and capacitance. Try the MECO 3 5/6 Digits 6000 Counts Autoranging Digital Multimeter for meeting all your electrical measuring needs with a battery life of 200 hours. MECO digital multimeters also come with a pair of test leads, holster, and K type thermocouples. | The Meco Autoranging Digital Multimeter is a top-of-the-line device that is best for electricians, technicians, and engineers. It offers a wide range of features, including autoranging, data hold, and a large LCD screen. The Meco MT6000 digital multimeter is a handheld device that is used to measure voltage, current, and resistance. It has a 3 digit LCD display and dimensions of 180x90x52 mm. The device can measure voltages from 60 to 1000 V, currents from 6 to 6000 mA, and resistances from 600 to 60000 ohms. With practical features like a backlight and multiple measurement ranges, this meter is best for use in a variety of applications. | The Meco-G 801T Digital Multimeter AC Voltage Range 600mV to 600V is one of the best selling products in the market. This device gives you accurate reading, helping you measure the electric supply. Well with this product you can measure voltage, current, and resistance of a circuit. The other name for this device is volt-ohm-milliammeter. This multimeter can be used to measure batteries, household wirings, electric motors and power supplies. |
Reviews
There are no reviews yet.