| Description | SPECIFICATIONS
- DC Voltage range : 600.0 mV to 1000 V , 5 ranges
Accuracy : ±0.3 % rdg. ±3 dgt.
- AC Voltage range : 6.000 V to 1000 V, 4 ranges, Frequency characteristics: 40 Hz - 1 kHz
Accuracy : 40 - 500 Hz : ±0.9 % rdg. ±3 dgt. (True RMS, crest factor 3)
- DC Current range : 60.00 mA to 10.00 A, 4 ranges,
Accuracy : ±0.9 % rdg. ±3 dgt.
- AC Current range : 600.0 mA to 10.00 A, 3 ranges,
Accuracy : 40 - 500 Hz : ±1.4 % rdg. ±3 dgt. (True RMS, crest factor 3, 40 Hz to 1 kHz)
- Resistance range : 600.0 Ω to 60.00 MΩ, 6 ranges,
Basic accuracy: ±0.7 % rdg. ±3 dgt.
- AC Current Range ( use with Clamp on probes ) : 10.00 A to 1000 A, 7 ranges, Add the Clamp on probe accuracy to basic accuracy 40 - 1 kHz : ±0.9 % rdg. ±3 dgt. (True RMS, crest factor 3)
- Voltage Detection : Hi: AC40 V to 600 V, Lo: AC80 V to 600 V
- Frequency Range : 99.99 Hz (5 Hz or more) to 99.99 kHz, 4 ranges (limited by the minimum detectable voltage and current)
Accuracy : ±0.1 % rdg. ±1 dgt
- Capacitance Range : 1.000 μF to 10.00 mF, 5 ranges
Accuracy : ±1.9 % rdg. ±5 dgt.
- Continuity check : Continuity threshold [ON]: 25 Ω or less , [OFF]: 245 Ω or more, Response time: 0.5 ms or more
- Diode Test : Open terminal voltage: 5.0 V or less, Testing current 0.5 mA or less, Threshold of forward voltage: 0.15 V to 1.5 V
- Other Functions : Filter function, display value hold, auto hold, MAX/MIN/Average value display, relative value display, auto-power save, USB communication (option)
- Display : Main and sub displays: 4-digits LCD, max. 6000 digits, bar graph
- Display Refresh Rate : 5 times/s (Capacitance measurement: 0.05 to 5 times/s, depending on measured value, Frequency: 1 to 2 time/s, Temperature: 1 time/s )
- Dimensions : 84 mm (3.31 in)W × 174 mm (6.85 in)H× 52 mm (2.05 in)D
- Mass : 390 g (13.8 oz) (including batteries and holster)
- Including Accessories : Test lead L9207-10 ×1, Holster ×1, Instruction manual ×1, LR03 alkaline battery ×4
FEATURES
- ±0.3% DC V basic accuracy, wide 40 Hz to 1 kHz AC V frequency characteristics
- Low-pass filter cuts high harmonics (when measuring inverter fundamental waveforms)
- USB communications function supports PC measurements (optional)
- Broad -25°C to 65°C (-13°F to 149°F) operating temperature range
- Dual display lets you check voltage and frequency simultaneously
- Measure up to 10 A with direct input
| SPECIFICATIONS
- DC Voltage : 600V
- AC Voltage : 600V
- DCA : 10A
- Resistance : 2MΩ
- Transistor hFE test : Vce = 3V
FEATURES
- Display Mode: 3 ½ digit, 7 segment LCD display
- Maximum Display: 1999
- AC & DC Voltage
- DC Current
- Resistance
- Temperature
- Transistor Hfe Test
- Diode & Continuity Test
- Polarity indication: “-” displayed for negative polarity
- Low battery indication:
- Over range indication: “1” displayed
- Auto Power Off
- Back light optional
- Power supply: 9V NEDA 1604 or 6F22 battery
- Dimensions: 138(L) x 69(W) x 31mm(H)
- Weight: ≈ 170g (battery included)
- Operating environment: 0˚C ~ 40˚C, at <80% RH
- Accuracies are guaranteed for 1 year, 18˚C to 28˚C , less than 80% RH
| SPECIFICATIONS :
- DC VOLTAGE : 999.9V
- AC VOLTAGE : 750.0V
- DC CURRENT : 9.999A
- AC CURRENT : 9.999A
- RESISTANCE : 9.999MΩ
- CAPACITANCE : 9.999mF
- FREQUENCY : 9.999MHz
- DUTY CYCLE : 1% ~ 99%
FEATURES :
- LCD with Backlight
- Auto Power Off
- Low Battery Indication
| SPECIFICATIONS :
- DC VOLTAGE : 200mV - 1000 V
- AC VOLTAGE : 200mV to 750V
- AC ACCURACY : ?(1%+4)
- DC ACCURACY : ?(0.5%+1)
- AC CURRENT : 200?A - 20 A
- DC CURRENT : 200?A - 20 A
- RESISTANCE : ?0.8% + 1
- DIMENSIONS : 170x80x43 mm
FEATURES :
- 3 ½ digit liquid crystal display (LCD) with a maximum reading of 1999..
- Automatic, (-)negative polarity indication.
- Automatic.
- Highest digit of(1) or (-1) is diplayed at MSD.
- 3 measurements per second, nominal..
- VOLTAGE MEASUREMENT.
- CURRENT MEASUREMENT.
- RESISTANCE MEASUREMENTS.
- DIODE AND TRANSISTOR TEST MEASUREMENTS.
- TRANSISTOR JUNCTION TESTS.
- TRANSISTOR hFE MEASUREMENTS.
- CONTINUITY MEASUREMENTS.
| SPECIFICATIONS :
- AC VOLTAGE : Up to 750 V
- DC VOLTAGE : Up to 1000 V
- AC RESPONSE : 40 Hz ~ 1 KHz
- ACCURACY : +-(0.8% rdg + 5 dgt)
- DC CURRENT : 10 A
- RESISTANCE : Up to 60 MOhm
- CAPACITANCE : Up to 100 mF
- DIMENSIONS : 147 x 71 x 45 mm
FEATURES :
- 3 5/6 Digits
- 6000 Counts
- TRMS
- Auto Ranging
- NCV (LED, Buzzer & EF Strength)
- Continuity Test (LED, Buzzer & EF Strength)
- LCD with Backlight
- Data Hold
- Auto Power Off
- Holster with Magnet
- Torch Light
- Test Lead Gripper
- Low Battery Indication
| SPECIFICATIONS
- DC Voltage : 1000V
- AC Voltage : 750V
- DCA : 20A
- ACA : 20A
- Capacitance : 200uF
- Resistance : 2000MΩ
- Frequency: 200kHz
- Temperature : -20°C to 1000°C
FEATURES
- Display Mode: 31/2 LCD display
- Maximum Display: 1999, updates every 2-3s
- Measuring method: Dual – slope integration A/D converter
- AC & DC Voltage
- AC & DC Current
- Capacitance
- Resistance
- Frequency
- Temperature
- Over range display: “1” displayed
- Low battery indication:
- Polarity indication: “-” displayed for negative polarity
- Display Mode: 31/2 LCD display
- Maximum Display: 1999, updates every 2-3s
- Measuring method: Dual – slope integration A/D converter
- AC & DC Voltage
- AC & DC Current
- Capacitance
- Resistance
- Frequency
- Temperature
- Over range display: “1” displayed
- Low battery indication:
- Polarity indication: “-” displayed for negative polarity
- Power supply: 9V
- Dimensions: 189(L) x 91(W) x 31.5mm(H)
- Weight: ≈ 280g (battery included)
- Operating environment: 0˚C ~ 40˚C
- Storage environment: -10˚C ~ 50˚C
- Accuracies are guaranteed for 1 year, 18˚C - 28 ˚C , less than 80% RH
- Fuse protection: F 500mA/250V
- Maximum voltage between terminals and earth ground: 1000VDC or 700VAC
|
| Content | The DT-4200 Hioki Digital Multimeter Series consist of a complete lineup of 9 models ranging from professional to industrial to pocket meters, delivering a super fast response rate and safety features that take electrical testing to a higher level. The DT4256 is a digital multimeter designed to deliver maximum functionality for use in a wide range of settings.
CAT IV 600 V, CAT III 1000 V | The instrument of this series is a small hand-held 3 ½ digital multimeter featuring stable, highly reliable and anti-drop performance. It is provided with a LCD display of 15mm height for clear reading. The circuit design takes LSI double integral A/D converter as its core under the protection of an overload protection circuit, making it a superior and handy instrument. It can be used to measure DC and AC voltage, DC current, resistance, diodes, transistors, temperature and for in-circuit continuity test. | | The Meco 603 Digital Multimeter AC Voltage Range 200mV to 750 V is one of the best selling products in the market. This device gives you accurate reading, helping you measure the electric supply. Well with this product you can measure voltage, current, and resistance of a circuit. The other name for this device is volt-ohm-milliammeter. This multimeter can be used to measure batteries, household wirings, electric motors and power supplies. | | The meter is a hand held 3 ½ digital multimeter for measuring DC and AC voltage, DC and AC current, resistance, diode, transistor, frequency, temperature, capacitance and continuity test with battery operated. The back light of display is optional. This multimeter is designed according to IEC – 1010 concerning electronic measuring instruments with an overvoltage category (CATII) and pollution 2. |
Reviews
There are no reviews yet.