-
Fluke 59 Mini Infrared Thermometer
SPECIFICATIONS
- Temperature Range : – 18°C to 275°C (0°F to 525°F)
- Response Time (95%) : < 500 ms
- Spectral Response : 6.5 – 18 um thermopile detector
- Emissivity : 0.95 Pre Set
- Distance to Spot Ratio : 8:1 (calculated at 90% energy)
- Display Resolution : 0.2°C (0.5°F)
- Storage Temperature : -20°C to +65°C (-4°F to 150°F), (without battery)
- Operating Humidity : 10% – 90% RH non-condensing @ up to 30°C(86°F)
FEATURES
- Small in size easily fit in your pocket
- Laser targeting for fast, precise measurements
- Backlit display for easy reading in dark work areas
- 8:1 distance to spot ratios measures a 10 cm spot from 10 meters to target just what you want
- ± 2% basic accuracy gives you readings you can trust
-
FLUKE 62 MAX Infrared Thermometer
SPECIFICATIONS
- Temperature Range : -30°C to 500°C (-22°F to 932°F)
- Response Time (95%) : < 500 ms (95% of reading)
- Spectral Response : 8 mm to 14 mm
- Emissivity : 0.10 to 1.00
- Distance to Spot Ratio : 10:1 (calculated at 90% energy)
- Display Resolution : 0.1°C (0.2°F)
- Operating Temperature : 0°C to 50°C (32°F to 122°F)
- Storage Temperature : -20°C to +60°C (-4°F to 140°F), (without battery)
- Operating Humidity : 10% to 90% RH non-condensing @ 30°C (86°F)
- Operating Altitude : 2000 meters above mean sea level
- Storage Altitude : 12,000 meters above mean sea level
- Safety : IEC 61010-1: Pollution degree 2 ; IEC 60825-1: Class 2
FEATURES
- Highly accurate infrared thermometer for measuring temperatures from -30°C to 500°C (-22°F to 932°F) accurate to +1.5°C or +1.5% of reading (whichever is greater)
- Provides a 10:1 Distance to spot ratio
- Offers single laser targeting for accurate and repeatable measurements
- Features IP54 rating against dust and moisture
-
FLUKE 925 VANE ANEMOMETER
SPECIFICATIONS
- Wind Speed Measurement
m/s : 0.40 to 25.00 m/s
ft/m : 80 to 4900 ft/m - Air Flow Measurement
Cubic meter/ second : 0.01 to 99.99 m3/s
Cubic foot/minute : 1 to 9999 ft3/m - Wind Temperature Measurement
Wind Temperature : 0°C to 50°C - Display : Dual-screen 4-digit (9999 points) LCD screen
- Measurement Unit
Wind speed: ft/m; m/s
Air flow: CMS (m3/s) and CFM (ft3/m) (cubic foot/minute)
Wind temperature: °C and °F - Data Holding : Lock the displayed readings
- Sensor
Wind speed/air flow sensor: conventional angular vane arm, lubricating ball bearing
Wind temperature sensor: precision thermistor
Minimum/maximum value storage, recording and viewing the minimum reading and maximum reading - Auto Power Off : Enter the sleep mode after 20 minutes (can be disabled) to save power
- Battery Life : 100 Hours
- Weight : 363 g, including the battery and sensor
- Dimensions: 181 × 71 × 38 mm
- Sensor head diameter : 70 mm
FEATURES
- Ability to measure wind speed in feet per minute or meters per second
- Data capture using one button and the ability to average multiple readings
- Min and Max alarm setting to alert the user when limits have been met
- Durable over mold housing to protect the unit from drops
- 1 M extension of sensor from display to ensure air flow is captured in hard to reach location
- Wind Speed Measurement
-
Fluke 941 Light Meter
SPECIFICATIONS
- Range : 20, 200, 2000, 20000, 200000 Lux ; 20, 200, 2000, 20000FC (footcandle)
- Sampling Rate : 2.5 times/second for the digital display
- Display : 3½ digit 1999-point LCD screen
- Sensor : Silicon photoelectric diode and optical filter
- Environment : For indoor use
- Dimension : 130 × 63 × 38 mm
Dimension Of Sensor : 80 × 55 × 29 mm - Weight : 220 g (including the battery)
FEATURES
- Measure in lux or foot-candles, with one button to switch between display options
- Measuring range up to 20,000 lux or foot candles
- Data hold to freeze reading on the digital display
- Min/max ability to show high and low readings
- Auto power off to save battery life
- Includes protective sensor cap
-
Fluke 945 Sound Meter
SPECIFICATIONS
- Environmental Noise
Range : 30 to 130 dB
Resolution : 0.1 dB
Accuracy : ±1.5 dB (ref 94dB@1KHZ) - Mechanical Noise :
Range : 30 to 130 dB
Resolution : 0.1 dB
Accuracy : ±1.5 dB (ref 94dB@1KHZ) - Display : 0.1 dB steps on 4-digit LCD screen
- Frequency Response : From 31.5 Hz to 8 kHz
- Dimensions : 200 x 56 32 mm
- Safety Standard : CE, designed to meet IEC651 Type2, ANSI S1.4 Type 2
FEATURES
- Max/Min
- Frequency weighting ranges: A, C
- Auto power off
- Auto ranging
- Backlit display
- Environmental Noise
-
Fluke VT06 Visual IR Thermometer
SPECIFICATIONS
- Infrared resolution : 120×90
- IR frequency band : 7.5~14 μm(long wave)
- Frame Rate : 9 Hz
- Thermal sensitivity/NETD : <60 mk
- Field of view (H x V) : 50° x 37.5°
- Spatial resolution : 7.6 mrad
- Focus system : Focus free
- Minimum focusing distance : 0.5 m (19.7 in)
- Temperature Range : -20 °C to 400 °C ; [-4 °F to 752 °F] (not specified for below -10 °C)
- Temperature Accuracy : ±2°C or 2% @ 23°C±5°C, whichever is greater
- Emissivity : Adjustable
- Operating temperature : -10 °C to 50 °C
- Storage temperature : -40 °C to 70 °C
- Operating altitude : 2000 m (1.24 mi)
- Storage Altitude : 12000 m (7.5 mi)
- Display : 6.096 cm (2.4-inch) LCD
- Size : 20.4 cm x 6.6 cm x 7.6 cm
- Weight : 0.36Kg
- Safety Standard : IEC 61010-1: Pollution Degree 2
FEATURES
- 120 x 90 resolution for more details
- Wide temperature range, -20°C to 400°C
- IP65 rated for dust and water proof, 2m drop test, suitable for harsh industrial environments
- Quickly locate the measured target with built-in laser pointer
- 2 hours charging time, 8 hours battery life
- Single-level menu interface, Open-and-View
-
Fluke VT08 Visual IR thermometer
SPECIFICATIONS
- Infrared resolution : 120×90
- IR frequency band : 7.5~14 μm(long wave)
- Frame Rate : 9 Hz
- Thermal sensitivity/NETD : <60 mk
- Field of view (H x V) : 50° x 37.5°
- Spatial resolution : 7.6 mrad
- Focus system : Focus free
- Minimum focusing distance : 0.5 m (19.7 in)
- Visible resolution : 320×240
- Visible FOV (H x V) : 53° x 41°
- Temperature Range : -20 °C to 400 °C ; [-4 °F to 752 °F] (not specified for below -10 °C)
- Temperature Accuracy : ±2°C or 2% @ 23°C±5°C, whichever is greater
- Emissivity : Adjustable
- Operating temperature : -10 °C to 50 °C
- Storage temperature : -40 °C to 70 °C
- Operating altitude : 2000 m (1.24 mi)
- Storage Altitude : 12000 m (7.5 mi)
- Display : 6.096 cm (2.4-inch) LCD
- Size : 20.4 cm x 6.6 cm x 7.6 cm
- Weight : 0.36Kg
- Safety Standard : IEC 61010-1: Pollution Degree 2
FEATURES
- 120 x 90 resolution for more details
- Wide temperature range, -20 °C to 400 °C
- Blends a visual image with infrared heat image overlay in real-time to clearly distinguish the measured target
- IP65 rated for dust and water proof, 2m drop test, suitable for harsh industrial environments
- Quickly locate the measured target with built-in laser pointer
- 2 hours charging time, 5 hours battery life
- Single-level menu interface, Open-and-View
-
HANNA HI98107 pHep Waterproof Pocket pH Tester with 0.1 pH Resolution
SPECIFICATIONS
- pH Range : 0.0 to 14.0 pH
- pH Resolution : 0.1 pH
- pH Accuracy : ±0.1 pH
- pH Calibration : Automatic, one or two points
- pH Temperature Compensation : Automatic, 0 to 50 oC (32 to 122°F)
- Temperature Range : 0 to 50 oC (32.0 to 122.0oF)
- Temperature Resolution : 0.1 oC / 0.1 °F
- Temperature Accuracy : ±0.5 oC / ±1.0 °F
- Automatic Shut-Off : 8 minutes, 60 minutes, or disabled
- Dimensions : 160 x 40 x 17 mm (6.3 x 1.6 x 0.7“)
- Weight : 65 g (2.3 oz.) without battery
FEATURES
- Slim, ergonomic design that fits comfortably in the hand or pocket
- Automatic temperature compensation, displays temperature in °C or °F
- Automatic calibration with standard buffers (pH 4.01, 7.01, and 10.01)
- Stability indicator confirms the reading has stabilized
- Automatic shut-off with three user controlled settings to conserve battery life
- Battery Error Prevention System (BEPS)
- An exposed temperature sensor along with an extractable cloth junction ensures a fast and stable temperature compensated measurement
- Only two buttons for meter operation. One for on/off and one for calibration.
-
HANNA HI98301 DiST1, waterproof TDS tester with ATC, 1999 ppm (mg/L)
SPECIFICATIONS
- TDS Range : 0 to 2000 ppm (mg/L)
- TDS Resolution : 1 ppm (mg/L)
- TDS Accuracy : ±2% F.S.
- TDS Calibration : automatic, one point at 1382 ppm
- EC/TDS Temperature Compensation : automatic from 0 to 50°C (32 to 122°F)
- Temperature Correction Coefficient : 1.9%/°C
- EC to TDS Conversion Factor : 0.5
- Temperature Range : 0.0 to 50.0°C (32.0 to 122.0°F)
- Temperature Resolution : 0.1°C (0.1°F)
- Temperature Accuracy : ±0.5°C (±1°F)
- Automatic Shut-Off : 8 minutes, 60 minutes, or disabled
- Environment : 0 to 50°C (32 to 122°F); RH 100%
- Dimensions : 160 x 40 x 17 mm (6.3 x 1.6 x 0.7“)
- Weight : 68 g (2.4 oz.) without battery
FEATURES
- Slim, Ergonomic Design
With rounded edges and a case that is only 17 mm (0.7”) thick, the HI98301 is thin and fits comfortably in the hand or pocket. - Large Multi-level LCD
The LCD is 29 mm (1.125”) x 20 mm (0.81”) allowing the user to easily read both the pH and temperature simultaneously. - Two-button Operation
One for ON/OFF, the other for calibration. - Exposed Temperature Sensor
Exposed temperature sensor allows for quick Automatic Temperature Compensated measurements. Temperature can be displayed in either oC or oF. - Graphite Sensor
Reduces polarization effects and does not oxidize resulting in a reliable and accurate reading.
- Automatic Calibration
Automatic calibration at 1382 ppm (mg/L) with a single push of a button. - Stability Indicator
A clock tag stability indicator will disappear to alert the user when the reading is stable. - Automatic Shut-off
User-selectable time until meter shuts off to conserve battery life. Options are 8 min, 60 min or disabled. - Low Battery Indicator
Low battery indicator that is displayed when less than 10% battery life is remaining. - Battery % Level at Startup
At start-up, all the LCD segments are displayed for 1 second, then the percent indication of the remaining battery life is displayed
-
HIOKI AC CLAMP METER 3280-10F
SPECIFICATIONS
- AC Current range : 41.99 to 1000 A, 3 ranges (50 Hz to 60 Hz, Average rectified), Basic accuracy: ±1.5 % rdg. ±5 dgt.
- DC Voltage range : 419.9 mV to 600 V, 5 ranges, Basic accuracy: ±1.0 % rdg. ±3 dgt.
- AC Voltage range : 4.199 V to 600 V, 4 ranges (45 to 500 Hz, Average rectified), Basic accuracy: ±1.8 % rdg. ±7 dgt.\
- Resistance range : 419.9 Ω to 41.99 MΩ, 6 ranges, Basic accuracy: ±2 % rdg. ±4 dgt.
- Other functions : Continuity: Buzzer sounds at 50 Ω ±40 Ω or less, Data hold, Auto power save, Drop-proof from height of 1 meter
- Display : LCD, max. 4199 dgt., Display refresh rate: 400 ms
- Environmental protection : IP40 dustproof and waterproof
- Power supply : Coin type lithium battery (CR2032) ×1, Continuous use 120 hours
- Core jaw dia. : φ 33 mm (1.30 in)
- Dimensions and mass : 57 mm (2.24 in) W × 175 mm (6.89 in) H × 16 mm (0.63 in) D, 100 g (3.5 oz)
FEATURES
- Measure the fundamental waveform component using the average rectified method
- Expanded -25°C to 65°C operating temperature range
- Connect the CT6280 flexible sensor to measure up to 4199 A in thick or paired wires
- Drop proof design withstands drop from a height of 1 meter
-
HIOKI AC/DC CLAMP METER CM4371-50
SPECIFICATIONS
- DC Current range : 20.00 A/600.0 A, Basic accuracy: ±1.3% rdg. ±0.08 A (20 A range)
- AC Current range : 20.00 A/600.0 A (10 Hz to 1 kHz, True RMS), Basic accuracy: 45-66 Hz: ±1.3% rdg. ±0.08 A (at 20 A
- Crest factor : 20.00 A range: 7.5 ; 600.0 A range: 3 or less
- DC+AC Current range : 20.00 A/600.0 A (10 Hz to 1 kHz, True RMS), Basic accuracy DC, 45-66 Hz: ±1.3% rdg. ±0.13 A (at 20 A)
- DC Voltage range : 600.0 mV to 1000 V (When using P2000: 600.0 V to 2000 V)
- AC Voltage range : 6.000 V to 1000 V, 4 ranges (15 Hz to 1 kHz, True RMS), Basic accuracy 45 – 66 Hz: ±0.9% rdg. ±0.003 V (at 6 V)
- DC+AC Voltage range : 6.000 V to 1000 V, 4 ranges, Basic accuracy DC, 45 – 66 Hz: ±1.0% rdg. ±0.013 V (at 6 V)
- Resistance range : 600.0 Ω to 6.000 MΩ, 5 ranges, Basic accuracy: ±0.7% rdg. ±0.5 Ω (at 600 Ω)
- Capacitance range : 1.000 μF to 1000 μF, 4 ranges, Basic accuracy: ±1.9% rdg. ±0.005 μF (at 1 μF)
- Frequency range : 9.999 Hz to 999.9 Hz, 3 ranges, Basic accuracy: ±0.1% rdg. ±0.003 Hz (at 9.999 Hz)
- Temperature (K) : -40.0 to 400.0 ˚C, add temperature probe accuracy to basic accuracy of ±0.5% rdg. ±3.0 ˚C
- Voltage detection : Hi: 40 V to 600 V AC, Lo: 80 V to 600 V AC, 50/60 Hz
- Dustproof, waterproof : IP54 (Storage or measurement of current of an insulated conductor)
- Core jaw diameter : φ33 mm (1.30 in), Jaw dimension: 69 mm (2.72 in) W× 14 mm (0.55 in)
- Power supply : LR03 Alkaline battery ×2 ; Continuous use: 40 hr (without Z3210 installed), 20 hr. (with Z3210 installed and using wireless communications) ; Other conditions: 10 A AC measurement, backlight off, 23°C reference value
FEATURES
- CAT IV 600 V, CAT III 1000 V When using the P2000: CAT III 2000 V, CAT IV 1000 V
- Measure DC voltages of up to 2000 V (*1) for open voltage inspections of solar panels
- Simultaneously measure inrush current in RMS and crest values
- Easily transfer measurement data to your smartphone or tablet by using our free app GENNECT Cross or to an Excel® file
- Harmonic analysis from 1st to 30th order with our free app GENNECT Cross
- Automatic AC/DC function helps boost work efficiency
-
HIOKI AC/DC CLAMP METER CM4373-50
SPECIFICATIONS
- DC Current Range : 600.0 A/2000 A, Basic accuracy: ±1.3% rdg. ±0.3 A (600 A range)
- AC Current Range : 600.0 A/2000 A (10 Hz to 1 kHz, True RMS), Basic accuracy 45 – 66 Hz: ±1.3% rdg. ±0.3 A (at 600 A)
- Crest factor : 600.0 A range: 3 or less ; 2000 A range: 2.84 or less
- DC+AC Current range : 600.0 A/2000 A (10 Hz to 1 kHz, True RMS), Basic accuracy DC, 45-66 Hz: ±1.3% rdg. ±1.3 A (at 600 A)
- DC Voltage range : 600.0 mV to 1000 V (When using P2000: 600.0 V to 2000 V)
- AC Voltage range : 6.000 V to 1000 V, 4 ranges (15 Hz to 1 kHz, True RMS), Basic accuracy 45 – 66 Hz: ±0.9% rdg. ±0.003 V (at 6 V)
- DC+AC Voltage range : 6.000 V to 1000 V, 4 ranges, Basic accuracy DC, 45 – 66 Hz: ±1.0% rdg. ±0.013 V (at 6 V)
- Resistance range : 600.0 Ω to 6.000 MΩ, 5 ranges, Basic accuracy: ±0.7% rdg. ±0.5 Ω (at 600 Ω)
- Capacitance range : 1.000 μF to 1000 μF, 4 ranges, Basic accuracy: ±1.9% rdg. ±0.005 μF (at 1 μF)
- Frequency range : 9.999 Hz to 999.9 Hz, 3 ranges, Basic accuracy: ±0.1% rdg. ±0.003 Hz (at 9.999 Hz)
- Temperature (K) : -40.0 to 400.0 ˚C, add temperature probe accuracy to basic accuracy of ±0.5% rdg. ±3.0 ˚C
- Voltage detection : Hi: 40 V to 600 V AC, Lo: 80 V to 600 V AC, 50/60 Hz
FEATURES
- CAT IV 600 V, CAT III 1000 V
When using P2000: CAT III 2000 V, CAT IV 1000 V - Measure DC voltages of up to 2000 V (*1) for open voltage inspections of solar panels
- Simultaneously measure inrush current in RMS and crest values
- Easily transfer measurement data to your smartphone or tablet by using our free app GENNECT Cross or to an Excel® file (*2)
- Harmonic analysis from 1st to 30th order with GENNECT Cross (*2)
- Automatic AC/DC function helps boost work efficiency
-
HIOKI BATTERY TESTER BT3554-51
SPECIFICATIONS
- Resistance measurement range : 3 mΩ (max. display 3.100 mΩ, resolution 1 μΩ) to 3 Ω (max. display 3.100 Ω, resolution 1 mΩ), 4 ranges
- Accuracy : ±0.8 % rdg ±6 dgt (3 mΩ range: ±1.0 % rdg ±8 dgt)
- Testing source frequency : 1 kHz ±30 Hz
- Voltage measurement range : ± 6 V (max. display ±6.000 V, resolution: 1 mV) to ± 60 V (max. display ±60.00 V, resolution: 10 mV), 2 ranges
- Temperature measurement accuracy : -10°C to 60°C (14°F to 140°F), Maximum display: 60.0°C (140.0°F), Resolution 0.1°C (0.1°F)
- Absolute max. input voltage : 60 V DC max. (No AC input)
- Measurement time : 100 ms
- Response time : Approx. 1.6 sec.
- Power supply : LR6 (AA) Alkaline dry battery ×8
- Continuous operating time: About 8.3 hr. (without Z3210 installed), About 8.2 hr. (with Z3210 installed and wireless communications active)
- Communication interface : USB Bluetooth® wireless communications (when Z3210 installed)
FEATURES
- Battery measurement can be performed while the battery is connected to its host device, without taking it offline
- Measure and save data in as fast as 2 seconds, a 60% improvement from the legacy 3554
- Instantaneously diagnose battery degradation (PASS, WARNING, FAIL) by measuring internal resistance and voltage (*1)
- Noise reduction technology improves noise resistance
- Screen and audio (*2) guidance simplifies measurement
- Measurement data is linked to site information and saved, reducing management man-hours
- Easily transfer measurement data to your smartphone or tablet by using our free app GENNECT Cross (*3) or to an Excel® file. (Wireless Adapter Z3210 is necessary)
- New protector delivers better ergonomic hold and durability in the field.
-
HIOKI CLAMP ON AC/DC HiTESTER 3288-20
SPECIFICATIONS
- DC Current range : 100.0/ 1000 A, Basic accuracy: ±1.5 % rdg. ±5 dgt.
- AC Current range : 100.0/ 1000 A, (10 Hz to 500 Hz, True RMS), Basic accuracy: ±1.5 % rdg. ±5 dgt.
- DC Voltage range : 419.9 mV to 600 V, 5 ranges, Basic accuracy: ±1.3 % rdg. ±4 dgt.
- AC Voltage range : 4.199 V to 600 V, 4 ranges, Basic accuracy: ±2.3 % rdg. ±8 dgt. (30 to 500 Hz, True RMS)
- Resistance range : 419.9 Ω to 41.99 MΩ, 6 ranges, Basic accuracy: ±2 % rdg. ±4 dgt.
- Other functions : Continuity: (50 Ω ±40 Ω) or less buzzer sounds, Data hold, Auto power save, Auto zero (DC A)
- Display : LCD, max. 4199 dgt., Display refresh rate: 2.5 times/s
- Power supply : Coin type lithium battery (CR2032) ×1, Continuous use 35 hours
- Core jaw dia. : φ 35 mm (1.38 in)
- Dimensions and mass : 57 mm (2.24 in) W × 180 mm (7.09 in) H × 16 mm (0.63 in) D, 150 g (5.3 oz)
FEATURES
- Voltage, resistance, and continuity check functions
- Use the 3288 for high current measurements such as UPS emergency batteries and train motors
-
HIOKI CM-4001 Ac Leakage Clampmeter
SPECIFICATIONS
- AC Current Range : 60.00 mA/ 600.0 mA/ 6.000 A/ 60.00 A/ 600.0 A, 5 ranges (40 Hz to 1 kHz, True RMS)
Accuracy : (45-66 Hz): ±1.5% rdg ±5 dgt (60.00 mA to 6.000 A), ±2.5% rdg ±5 dgt (60.00 A to 600.0 A) - Frequency range : 40.0 Hz to 999.9 Hz
- Crest factor : 4.5 (4000 counts or less)
3 (more than 4000 counts, 6000 counts or less) - Filter function : Cut off frequency: 180 Hz ±30 Hz at filter ON (-3 dB)
- Display : Display refresh rate: 5 times/s
- Core Jaw Diameter : φ 24 mm (0.94 in)
- Dimensions : 37 mm (1.46 in) W × 160 mm (6.30 in) H × 27 mm (1.06 in) D
- Mass : 115 g (4.1 oz.)
- Included Accessories : Carrying case × 1, Strap × 1, Instruction manual × 1, Operating Precautions × 1, LR03 alkaline battery × 1
FEATURES
- Find issues faster with comparator function
- Identify intermittent GFCI and RCD trips to prevent unplanned equipment downtime by testing for earth leakage current
- Measure everything from leakage to load
- Slim jaws let you work with ease
- Easily transfer measurement data to your smartphone or tablet by using our free app GENNECT Cross or to an Excel® file. (Wireless Adapter Z3210 is necessary)
- AC Current Range : 60.00 mA/ 600.0 mA/ 6.000 A/ 60.00 A/ 600.0 A, 5 ranges (40 Hz to 1 kHz, True RMS)
-
HIOKI CM-4003 AC LEAKAGE CLAMP METER (Output and external power supply function)
SPECIFICATIONS
- AC Current Range : 6.000 mA, 60.00 mA, 600.0 mA, 6.000 A, 60.00 A, 200.0 A, 6 ranges, True RMS
Accuracy : 45 Hz – 400 Hz: ±1.0% rdg ±5 dgt (6.000 mA to 6.000 A), ±1.5% rdg ±5 dgt (60.00 A, 200.0 A)
Accuracy : 15 Hz – 45 Hz, 400 Hz – 2 kHz: ±2.0% rdg ±5 dgt
Defined Accuracy Range : 0.060 mA to 200.0 A - Frequency range : 15.0 Hz to 2000 Hz
- Crest factor : 3 (other than 200.0 A range), 1.5 (200.0 A range)
- Filter function : Cut off frequency: 180 Hz ±30 Hz at filter ON (-3 dB)
- Output Function : RMS (RMS value output), WAVE (waveform output)
- Harmonic Levels : [With Z3210 installed] Current harmonic levels up to 30th, Content factor, Total harmonic distortion ratio
*Harmonics can be displayed with our free app GENNECT Cross. - Display : Display refresh rate: 5 times/s
- Core Jaw Diameter : φ 40 mm (1.57 in.)
- Dimensions : 64 mm (2.52 in) W × 233 mm (9.17 in) H × 37 mm (1.46 in) D
- Mass : 400 g (14.1 oz.)
- Included Accessories : Connection Cable L9097 × 1, USB Cable × 1, Carrying case C0203 × 1, Instruction manual × 1, Operating Precautions × 1, AA-size alkaline battery (LR6) × 2
FEATURES
- Easily transfer measurement data to your smartphone or tablet by using our free app GENNECT Cross or to an Excel® file. (Wireless Adapter Z3210 is necessary)
- Detect minuscule leakage currents with a newly designed sensor. (Core jaw diameter up to φ 40 mm)
- Broad measurement range extending from leakage currents to load currents
- Complies with the performance standard set forth in IEC/EN 61557-13, an international standard on leak clamp meters
- Solve GFCI and RCD problems quickly
- Speed up pass/fail judgments with the built-in comparator function
- Output function (waveform/RMS): use with a recorder to record waveforms and fluctuations
- External power supply: use an optional AC adapter for continuous, long-term measurement
- CAT III 300 V
- AC Current Range : 6.000 mA, 60.00 mA, 600.0 mA, 6.000 A, 60.00 A, 200.0 A, 6 ranges, True RMS