Showing 305–320 of 353 results

  • MECO VBM6246 VEHICLE BATTERY SYSTEM

    SPECIFICATIONS: 

    • BATTERY VOLTAGE : 12 & 24 V
    • DIMENSIONS : 180x90x32 mm
    • RANGE : CCA Range: 100 to 1700 IEC Range: 100 to 1000
      EN Range: 100 to 1700 DIN Range: 100 to 1000

    FEATURES : 

    • Loose Lead Detection.
    • Reverse Polarity Protection.
    • Overload Protection to ensure Operator Safety.
    • Display of Battery Condition: Good/Ok/Pay Attention/Replace.

     

     

    Read more

  • MECO VBSM6129B – VEHICLE BATTERY SYSTEM METER

    SPECIFICATIONS :

     

    • CCA Range: 100 to 1700
    • IEC Range: 100 to 1000
    • EN Range: 100 to 1700
    • DIN Range: 100 to 1000FEATURES :
    • SUITABLE FOR : Battery Test, Engine Activation Load Test & Charging System Test.
    Read more

  • MECO VBSM6246P VEHICLE BATTERY SYSTEM

    SPECIFICATIONS : 

    • RATED  CAPACITY : 4 – 400 Ah
    • DIMENSION : 235x90x50 mm

    FEATURES : 

    • Key Parameters Measured for Diagnosis of Vehicle Battery & Electrical System
    • Display of Battery Condition [Good / Ok / Pay Attention / Replace]
    • Overload Protection to ensure Operator Safety
    • Loose Lead DetectionReverse Polarity Protectionl
    • Internal Unit Conversion CCA / IEC / EN / DIN
    • Battery Recharge Indicator, Detects and Displays Bad Cell, Overload Protection of Input Voltage
    Read more

  • MECO-G R-DT903A-1 DIGITAL INSULATION RESISTANCE TESTER

    SPECIFICATIONS :

    • DC VOLTAGE TEST : 0V~1000
    • AC VOLTAGE TEST : 0V~750
    • BATTERY  VOLTAGE : 1.5 V
    • RESISTANCE : 500 MW/1000 V
    •  TEMPERATURE : -10 to 50 deg C(RH £ 75%)

    FEATURES : 

    • Inbuild Protection Circuit to prevent the harm of reverse voltages.
    • LCD Back Light Function with Indicator Switch.
    • 3 Ranges of Insulation Measurement.
    Read more

  • MECO-G R-2025 DIGITAL CLAMPMETER

    SPECIFICATIONS :

    • AC VOLTAGE : 750V
    • DC VOLTAGE : 1000V
    • AC CURRENT : 200A
    • RESISTANCE : 2M ohms
    • CONTINUITY TEST : 20KHz

    FEATURES :

    • TRANSFORMER JAWS
    • TIGGER
    • DATA HOLD SWITCH
    • ROTARY SWITCH
    • 3 1/2 DIGITS DISPLAY
    • BACK LIGHT SWITCH
    • COM INPUT TERMINAL
    • V/OHM INPUT TERMINAL
    Read more

  • MECO-G R-2070C DIGITAL CLAMPMETER

    SPECIFICATIONS : 

    • AC CURRENT : 600A
    • AC VOLTAGE : 600A
    • DIODE RANGE : 1mV
    • FREQUENCY : 50Hz~400Hz
    • DIMENSION : 185mmx51mmx25mm
    • RESISTANCE : 60M ohms
    • CAPACITANCE : 1000μF

    FEATURES: 

    • Op. Current <2mA (no back light).
    • LCD Display,
    • Auto / Manual Ranging, Data Hold.
    • NCV APO, Temperature, Frequency, Max Hold.
    • Diode Test, Resistance, Duty Cycle.
    • Continuity Buzzer, Backlight, Trms.
    • Low Battery Indicated.
    Read more

  • MECO-G R-2070D DIGITAL CLAMPMETER

    SPECIFICATIONS :

    • DC CURRENT  : 600A
    • AC CURRENT : 600A
    • AC VOLTAGE : 600V
    • DC VOLTAGE : 600V
    • DISPLAY : 3 5/6 digit,6000
    • BETTERY : 9V (6F22)
    • TEMPERATURE : 600°C
    • CAPACITANCE : 1000uF
    • FREQUENCY : 10 MHz
    • RESISTANCE : 60MΩ
      FEATURES:
    • Op. Current <2mA (no back light).
    • LCD Display,
    • Auto / Manual Ranging, Data Hold.
    • NCV APO, Temperature, Frequency, Max Hold.
    • Diode Test, Resistance, Duty Cycle.
    • Continuity Buzzer, Backlight, Trms.
    • Low Battery Indicated.
    • Duty Cycle : 0.1% – 99.9%.

     

     

    Read more

  • MECO-G R-2700T DIGITAL CLAMPMETER

    SPECIFICATIONS :

    • DC VOLTAGE : 1000V
    • AC VOLTAGE : 750V
    • AC CURRENT : 300A
    • RESISTANCE : 60M ohms
    • FREQUENCY : 50⁓1KHz
    • TEMPERATURE : -40~2000℉
    • CAPACITANCE : 60nF/600nF/6µF/60µF/400µ/20mF

    FEATURES :

    • TRANSFORMER JAWS
    • TRIGGER
    • RANGE BUTTONS
    • Hz/DUTY BUTTON
    • “COM” TERMINAL
    • DATA HOLD /BCKLIGHT BUTTON
    • INPUT TERMINAL
    • FUNCTION SWITCH/RANGE SWITCH
    • SELECT BUTTON
    Read more

  • MECO-G R-36B DIGITAL MULTIMETER

    SPECIFICATIONS :

    • DC VOLTAGE : 1000V
    • AC VOLTAGE : 750V
    • DC CURRENT : 10V
    • RESISTANCE  : 20 M ohms
    • TEMPERATURE : -20℃ to 1370℃
    • FREQUENCY RANGE : 40Hz – 400Hz

    FEATURES :

    • LCD Display
    • DATA HOLD button
    • BACK LIGHT button
    • FUNCTION AND RANGE SWITCH
    • “10A” Jack
    • “COM” Jack
    • “V ohms m A” Jack

     

     

     

    Read more

  • MECO-G R-909T DIGITAL MULTIMETER

    SPECIFICATIONS :

    • DC VOLTAGE : 1000V
    • AC VOLTAGE : 750V
    • DC AMPERE  : 10A
    • AC AMPERE  : 10A
    • RESISTANCE : 60 M ohms
    • CAPACITANCE : 20µF
    • FREQUENCY : 60MHz

    FEATURES :

    • Hang-by Magnetic Strip
    • LCD Display
    • Silicone Button
    • Function Switch
    • 10A Jack
    • µA/mA Jack
    • “COM” Input Terminal
    • “INPUT” Input Terminal
    • Holster

     

    Read more

  • MECO-G R-DIT945K-1 DIGITAL INSULATION TESTER 100/250/500/1000/2500/5000V

    SPECIFICATIONS

    • Test Voltage : 100V/250V/500V ±10%
      Range : 0.1~20MΩ
      Accuracy : ±(3% + 5dgts)
      Resolution : 0.01MΩ
    • Test Voltage : 1000V/2500V/5000VDC ±10%
      Range : 200MΩ~10GΩ
      Accuracy : ±(5% + 10dgts)
      Resolution : 0.01MΩ
    • Display : 3½ Dgt. (1999 Counts) Large LCD Display with 29mm Display Height.
    • Accuracy : ±(3% + 5dgts)
    • Operating Temperature : 0°C to 40°C (RH £ 85%)
    • Storage Temperature : -10°C to 50°C (RH £ 75%)
    • Dimensions : 190 x 155 x 75 mm
    • Weight : Approx 900g
    • Power : 12V (8 x 1.5V) (R6AA size batteries) or AC Adaptor 12VDC

    FEATURES

    • 3½ Digit (1999 Counts) Large Display with Back light
    • LED Indicator for HV (High Voltage)
    • High Accuracy ±(3% + 2dgts) for Insulation Measurement.
    • In-build Protection Circuit to prevent the damage reverse voltages .
    • LCD Back Light Function with Indicator Switch.
    • Battery Operated / AC adapter
    • 6 Ranges of Insulation Measurement.
    • Display with Annunciators
    • Suitable for calculation PI and DAR (manually)
    • Auto-Ranging (Insulation Measurement)
    • As per IS10656-1983
    • As per EMC standard IEC 61326-1 Class B
    • Over Voltage CAT III, 600V
    • AS per Safety Standard IEC/EN 61010-1 & 61010-31
    • IP-44 Protection
    Read more

  • MECO-G R2025THz DIGITAL CLAMPMETER

    SPECIFICATIONS :

    • DC VOLTAGE : 1000V
    • AC VOLTAGE : 750V
    • ACCURRENT : 1000V
    • RESISTANCE : 60M ohms
    • TEMPERATURE : -40~2000℉

    FEATURES : 

    • TRANSFORMER JAWS
    • TRIGGER
    • Hz/DUTY BUTTON
    • RANGE BUTTON
    • 3 5/6 DIGIT LCD DISPLAY
    • “V” INPUT TERMINAL
    • “COM” TERMINAL
    • SELECT BUTTON
    • FUNCTION SWITCH /RANGE SWITCH
    • D. HOLD BUTTON
    Read more

  • MECO-G-R-603A DIGITAL MULTIMETER

    SPECIFICATIONS : 

    • DC VOLTAGE : 200mV-1000V
    • AC VOLTAGE : 200mV to 750V
    • DC CURRENT : 2mA-20A
    • AC CURRENT : 2mA-20A
    • DC ACCURACY : ? (0.5% +3dgts)
    • AC ACCURACY : ? (1.0% + 3dgts)
    • RESISTANCY : ? (0.8% + 3dgts)
    • CAPACITANCE : ? (2.5%+20dgts)

    FEATURES :

    • Digital Multimeter Can Measure Ac Voltage, Dc Voltage, Ac Current, Dc Current, Resistance, Capacitance..
    • Temperature And High Current (Upto 600A) With Adapter..
    • This Digital Multimeter Has A Built-In Hostler For Anti Sliding..
    • Additional Features include Diode Test, Transistor check..
    • Continuity check, Low Battery Display, Maximum Hold..
    • Auto power off, Data Hold and Back light..
    Read more

  • MECO-G-R-801T DIGITAL MULTIMETER

    SPECIFICATIONS :

    • DC VOLTAGE : 600mV-600V
    • AC VOLTAGE : 600mV to 600V
    • AC CURRENT : 600µA-10A
    • DC CURRENT : 600µA-10A
    • DISPLAY : 3⅚ Digit
    • DC CURRENT ACCURACY : ± (1.5% + 5dgts)
    • AC CURRENT ACCURACY : ± (1.5% + 7dgts)
    • TEMPERATURE : -40°C – 1000°C
    • FREQUENCY : ± (0.5% + 3dgts)
    • RESISTANCE : 600Ω-60MΩ

    FEATURES :

    • Auto/Manual Ranging..
    • Data Hold..
    • NCV APO, Battery & Temperature Check.
    • Max Hold..
    • Diode Test..
    • HFE Test, TRMS..
    • Duty Cycle – 0.01% – 99.9%..
    • Audible Continuity Test..

     

    Read more

  • METRAVI ERT-1501 Digital Earth Resistance Tester With Kit

    SPECIFICATIONS

    • Range : 0Ω to1000Ω
    • Resolution :
    • Accuracy : ±3%
    • DC Voltage Range : 0 V to 1000 V
    • AC Voltage Range : 0 V to 750 V
    • Resistance Range :
    • Certifications : , 

    FEATURES

    • Data Hold facility
    • Displays test result and battery voltage on the same screen
    • LOCK Button for continuous HANDS FREE measurement
    • Both Earth Resistance and Earth Resistivity can be measured
    • Can be used in 4 Terminal and 3 Terminal configurations
    • Display : 4 Digits EXTRA LARGE Backlit Dual LCD Display
    • Earth Resistance Range : 0 – 10/100/1000 Ohms
    • Complies with CE, CAT-III 1000V
    • Complete with Testing Kit
    • Re-Chargeable Battery and Battery Charger can be provided at extra cost
    Read more

  • METRAVI ERT-1502 Digital Earth Resistance Tester With Kit

    SPECIFICATIONS

    • Range : 0-20/200/2000 Ω
    • Resolution :
    • Accuracy : ± 2%
    • DC Voltage Range : 0 V to 1000 V
    • AC Voltage Range : 0 V to 750 V
    • Resistance Range :
    • Certifications : , 

    FEATURES 

    • Data Hold facility
    • Displays test result and battery voltage on the same screen
    • LOCK Button for continuous HANDS FREE measurement
    • Both Earth Resistance and Earth Resistivity can be measured
    • Can be used in 4 Terminal and 3 Terminal configurations
    • 4 Digits EXTRA LARGE Backlit Dual LCD Display
    Read more