| Description | SPECIFICATIONS
- Test Voltage : 100V/250V/500V ±10%
Range : 0.1~20MΩ
Accuracy : ±(3% + 5dgts)
Resolution : 0.01MΩ
- Test Voltage : 1000V/2500V/5000VDC ±10%
Range : 200MΩ~10GΩ
Accuracy : ±(5% + 10dgts)
Resolution : 0.01MΩ
- Display : 3½ Dgt. (1999 Counts) Large LCD Display with 29mm Display Height.
- Accuracy : ±(3% + 5dgts)
- Operating Temperature : 0°C to 40°C (RH £ 85%)
- Storage Temperature : -10°C to 50°C (RH £ 75%)
- Dimensions : 190 x 155 x 75 mm
- Weight : Approx 900g
- Power : 12V (8 x 1.5V) (R6AA size batteries) or AC Adaptor 12VDC
FEATURES
- 3½ Digit (1999 Counts) Large Display with Back light
- LED Indicator for HV (High Voltage)
- High Accuracy ±(3% + 2dgts) for Insulation Measurement.
- In-build Protection Circuit to prevent the damage reverse voltages .
- LCD Back Light Function with Indicator Switch.
- Battery Operated / AC adapter
- 6 Ranges of Insulation Measurement.
- Display with Annunciators
- Suitable for calculation PI and DAR (manually)
- Auto-Ranging (Insulation Measurement)
- As per IS10656-1983
- As per EMC standard IEC 61326-1 Class B
- Over Voltage CAT III, 600V
- AS per Safety Standard IEC/EN 61010-1 & 61010-31
- IP-44 Protection
| SPECIFICATIONS :
- TEST VOLTAGE : 1000 V/ 2500 V/ 5000 V
- OPERATING TEMEPRATURE : 0 to 40 deg C
- DMENSIONS : 190x155x75 mm
- RESISTANCE : 0.1M Ohm to 200G Ohms
- ACCURACY : ±(3% +5 digit) for Insulation Resistance Range RDG
±(2% +5 digit) for AC Voltage Measurment
- AC VOLTAGE : 0 - 6000 VAC (50-60 Hz)
FEATURES :
- Data Holding Function.
- Display with Annunciators.
- Auto Range (Insulation Test).
- Battery Operated with AC Adaptor.
- With LED Indicators & Beep Facility.
- Red LED Indicator for HV (High Voltage).
- Measurement of AC Voltage Upto 600VAC.
- Range Selection & Single Person Push Button Operation.
- LCD with Green Back Light Function with Indicator Switch.
- Measurement of Phase Sequence Between (Phase - Phase Voltage).
- Inbuilt Protection Circuit to prevent the harm of reverse Voltages.
| SPECIFICATIONS
DIT 90 A
- VOLTAGE : 1000
- RANGE : 2000 MΩ
- RESOLUTION : 1 MΩ
- ACCURACY : 2 mA±3%of rdg + 2 digits
- MAXIMUM NO LOAD VOLTAGE : ±25% of rated voltage
DIT 90 B
- VOLTAGE : 1000
- RANGE : 200 MΩ
- RESOLUTION : 0.1 MΩ
- ACCURACY : 2 mA±3%of rdg + 2 digits
- MAXIMUM NO LOAD VOLTAGE : ±25% of rated voltage
DIT 90 C
- VOLTAGE : 500
- RANGE : 1000 MΩ
- RESOLUTION : 1 MΩ
- ACCURACY : 2 mA±3%of rdg + 2 digits
- MAXIMUM NO LOAD VOLTAGE : ±25% of rated voltage
DIT 90 D
- VOLTAGE : 500
- RANGE : 200 MΩ
- RESOLUTION : 0.1 MΩ
- ACCURACY : 2 mA±3%of rdg + 2 digits
- MAXIMUM NO LOAD VOLTAGE : ±25% of rated voltage
DIT 90 E
- VOLTAGE : 100
- RANGE : 200 MΩ
- RESOLUTION : 0.1 MΩ
- ACCURACY : 2 mA±3%of rdg + 2 digits
- MAXIMUM NO LOAD VOLTAGE : ±25% of rated voltage
FEATURES
- 3½ Digit
- Optional Power Adaptor
- 5 Models with Various Voltage and Mohm Range
- Single Person Push Button Operation
- POWER: AA 1.5V X 6
- Standard Accessories : Soft Carrying Case, Test Lead, Manual
- Dimension : 139(H) x 99(W) x 54(D)mm
| SPECIFICATIONS :
- DC VOLTAGE : 500 V
- RANGES : 0 - 200 M Ohms
- DIMENSIONS : 123x270x35 mm
- RESOLUTION : 0.1 M Ohms
FEATURES :
- Large, Easy to Read Display.
- Low Battery Indicator.
- Fault Protection, Buzzer Alarms If Short Circuit.
- Dimension: (D) Millimetre.
- Standard Accessories: Soft Carrying Case, Probe & Manual.
- Non Contact Voltage (NVC).
- True RMS Sensing.
| SPECIFICATIONS :
- INSULATION TEST VOLTAGE : 1000V DC
- OPERATING TEMPERATURE : 0°C to 50°C
- INSULATION RESISTANCE TEST RANGE : 0-200 MΩ
- INSULATION RESISTANCE ACCURACY : ±(3%rdg+2dgt)
FEATURES :
- 3½ Digit 17mm LCD Display
- Terminal Voltage more than 85% of rated Voltage for Insulation Resistance Measurement from 10% to 100% of the Insulation Resistance Range
| SPECIFICATIONS
- Temperature Coefficient : <0.1% per °C
- Operating Temperature : -20°C To +40°C (full range) -20°C To +60°C (upto 100M )
- Storage Temperature : -25°C To +65°C
- Relative Humidity : 90% RH at 40°C max.
- Display : LCD display Field (65 mm x 30mm) with analog indication and digital display and with display of unit of measured quantity and functions
- Dimensions : 84 mm x 195 mm x 35 mm
- Weight : 500 g including battery
FEATURES
- Test Voltages 50V/ 100V/ 250V,/500V /1000V : Test voltages from 50V to 1000V can be selected for Insulation Resistance measurement .It covers all insulation tests up to 1000V
- Insulation Resistance measurement: The instrument is capable of measuring insulation resistance from 10 K ...999 M Ohm
- Hands-free continuity testing: Continuity testing (0-10 W with acoustic signal) can be done without pressing the test button. In addition to the display function, an acoustic signal can be activated which sounds if the adjustable limit value is violated.
- Voltmeter: Instrument measures voltages >25V …600V AC/DC
- Automatic discharge for capacitive circuits after test measurement: Capacitive devices under test, such as cables and windings, that get charged during the test, are discharged by the tester.
- Live circuit detection: Displays presence of voltages 25V irrespective of function selected.
- Pre-selectable limit checks (Go / No-Go option) for MW/GW An acoustic signal can be generated when the measured value of insulation resistance falls below an adjustable limit value.
- Lead resistance null facility: The instrument provides a facility to compensate the resistance of the leads for an accurate measurement of low resistances.
- Storage of MIN / MAX values In addition to the display of the actual measured value, the minimum or maximum value can constantly be updated or stored
- Storage Memory for last 10 readings. The instrument provides a facility to store and recall 10 values in each of the 5 ranges of insulation resistance measurement, Continuity and Resistance measurement.
- Blown fuse indication. The display FUSE points to a blown fuse.
- Low battery indication. Automatic display of the Symbol “ ” when battery cells are exhausted.
- Stop Watch. : This function allows you to measure elapsed time up to 1 hour.
- Auto-power off function : The instrument turns off automatically, if any of the keys or the selector switch have not been activated for about 10 minutes in insulation range and 5 minutes in other ranges or can be switched to continuous operation.
- Protective holster for rough duty . A holster of soft rubber with tilt stand protects the meter against damage in the case of shock and drop
|
| Content | “MECO-G” has introduced a new & advanced multi-range 3½ Dgt. (1999 Counts) Digital Insulation Tester Model: R-DIT945K-1. It has 6 Voltage Ranges i.e. 100V/250V/500V/1000V/2500V/5000V. R-DIT945K-1 has three Ohms (W) ranges, 0-200MW, 200MW-10GW and 10GW-2000GW. | MECO DIT-954 Digital Insulation Tester has the following features: 3 1/2 Digit (1999 Counts) Lage LCD Display; High Accuracy; Range Selection & Single Person Push Button Operation; LCD Back Light Function with Indicator Switch; Data Holding Function Function Icons on Display; Measurement of AC Voltage upto 600VAC; Measurement of Phase Sequence between (Phase-Phase Voltage)with LED Indicator; Auto Range (Insulation Test); LED Indicator for High Voltage; Inbuilt Protection Circuit to prevent the harm of reverse voltages; Battery Operated with AC Adaptor; 3 Ranges of Voltage & Insulation Resistance | HTC DIT-90C Digital Insulation Tester Resistance range 0-1000M Ohm is a premium quality product from HTC. All HTC DIT-90 Digital Insulation Tester Resistance range 200-2000M Ohm are manufactured by using quality assured material and advanced techniques, which make them up to the standard in this highly challenging field. The materials utilized to manufacture HTC DIT-90 Digital Insulation Tester Resistance range 200-2000M Ohm, are sourced from the most reliable and official vendors, chosen after performing detailed market surveys. HTC products are widely acknowledged in the market for their high quality. We are dedicatedly involved in providing an excellent quality array of HTC Insulation Testers . | Meco Digital Insulation Tester, DIT-99C is available with the range 0-200 M Ohms. It is paired with accessories like 1 x Pair of Crocodile / Alligator Test Leads (Red & Black)|1 x Carrying Case|6 x 1.5V AA Batteries (Fitted - In)|1 x Operation Manual. The DC voltage of this tool is 500 volt and the resolution is 0.1 M Ohms. The product is available with 1 year warranty period and that is why it is more reliable and durable. This digital insulation tester is available from the reputed brand that offers great services and a better working experience. | All Meco DIT-99D Digital Insulation tester IRT Range 0-200M Ohm are manufactured by using quality assured material and advanced techniques, which make them up to the standard in this highly challenging field. The materials utilized to manufacture Meco DIT-99D Digital Insulation tester IRT Range 0-200M Ohm, are sourced from the most reliable and official vendors, chosen after performing detailed market surveys. Meco products are widely acknowledged in the market for their high quality. We are dedicatedly involved in providing an excellent quality array of Meco Insulation Testers | RISH Insu10 Analog-Digital Insulation and Continuity Tester is suitable for following Measurement of the insulation resistance on electrically dead equipment and systems with test voltages up to 1000V. For testing motors, transformers, generators, switchgears. For testing of house hold appliances. Measurement of the insulation resistance of cables. Very useful for on-site maintenance and service departments |
Reviews
There are no reviews yet.