| Description | SPECIFICATIONS
- Testing Voltage : 100/250/500/1000/2500/5000 V
- OUT VOLTAGE : 90~110% of the test voltage
- RANGE : 0.1M 20G for 100/250/500 V ; 0.1M 200G for 1000/2500/5000 V
- RESOLUTION : 0.01MΩ
- ACCURACY : 0.1~200MΩ ± 3% of rdg + 5digits ; 200MΩ~10GΩ ± 5% of rdg + 10 digits ; 10~200GΩ ± 10% of rdg + 5 digits
AC VOLTAGE
-
- RANGE : 0 – 600V
- RESOLUTION : 1V
- ACCURACY : ±2.0% of rdg + 5 digits
FEATURES
- 3½ Digit Insulation Tester with Backlight
- 1,999 Count
- Data Hold
- Test Range 100 V to 5000 V
- POWER: AA 1.5V X 8 (Rechargeable Battery)
- Standard Accessories : Soft Carrying Case, Test Lead, Manual, Power Adaptor,AA 1.5V X 8 (Rechargeable Battery)
- Dimension : 190(H) x 155(W) x 75(D)mm
| SPECIFICATIONS
- Test Voltage : 100V/250V/500V ±10%
Range : 0.1~20MΩ
Accuracy : ±(3% + 5dgts)
Resolution : 0.01MΩ
- Test Voltage : 1000V/2500V/5000VDC ±10%
Range : 200MΩ~10GΩ
Accuracy : ±(5% + 10dgts)
Resolution : 0.01MΩ
- Display : 3½ Dgt. (1999 Counts) Large LCD Display with 29mm Display Height.
- Accuracy : ±(3% + 5dgts)
- Operating Temperature : 0°C to 40°C (RH £ 85%)
- Storage Temperature : -10°C to 50°C (RH £ 75%)
- Dimensions : 190 x 155 x 75 mm
- Weight : Approx 900g
- Power : 12V (8 x 1.5V) (R6AA size batteries) or AC Adaptor 12VDC
FEATURES
- 3½ Digit (1999 Counts) Large Display with Back light
- LED Indicator for HV (High Voltage)
- High Accuracy ±(3% + 2dgts) for Insulation Measurement.
- In-build Protection Circuit to prevent the damage reverse voltages .
- LCD Back Light Function with Indicator Switch.
- Battery Operated / AC adapter
- 6 Ranges of Insulation Measurement.
- Display with Annunciators
- Suitable for calculation PI and DAR (manually)
- Auto-Ranging (Insulation Measurement)
- As per IS10656-1983
- As per EMC standard IEC 61326-1 Class B
- Over Voltage CAT III, 600V
- AS per Safety Standard IEC/EN 61010-1 & 61010-31
- IP-44 Protection
| SPECIFICATIONS :
- DC VOLTAGE : 500 V
- RANGES : 0 - 200 M Ohms
- DIMENSIONS : 123x270x35 mm
- RESOLUTION : 0.1 M Ohms
FEATURES :
- Large, Easy to Read Display.
- Low Battery Indicator.
- Fault Protection, Buzzer Alarms If Short Circuit.
- Dimension: (D) Millimetre.
- Standard Accessories: Soft Carrying Case, Probe & Manual.
- Non Contact Voltage (NVC).
- True RMS Sensing.
| SPECIFICATIONS :
- DC VOLTAGE : 250 V
- RANGES : 0 - 200 M Ohms
- RESOLUTION : 0.1 M Ohms
FEATURES :
- Testing insulation is essential to keeping wires and motors working properly.
- The analog insulation tester will measure the resistance in ohms and will display the results on a dial.
- It can also be used on the wire insulation, as well as cables and cords.
- The analog insulation tester is made up of a set of probes that are inserted into the insulation to test the insulation resistance.
| SPECIFICATIONS
- Temperature Coefficient : <0.1% per °C
- Operating Temperature : -20°C To +40°C (full range) -20°C To +60°C (upto 100M )
- Storage Temperature : -25°C To +65°C
- Relative Humidity : 90% RH at 40°C max.
- Display : LCD display Field (65 mm x 30mm) with analog indication and digital display and with display of unit of measured quantity and functions
- Dimensions : 84 mm x 195 mm x 35 mm
- Weight : 500 g including battery
FEATURES
- Analog + Digital Display ( Log scale for Insulation Measurement) : The Analog scale for insulation resistance measurement is Logarithmic in nature which gives the dynamic performance of an Analog insulation tester. The Analog scale is linear for low Ohm and Voltage measurement.
- User Selectable Backlit Display: The instrument is provided with user selectable Back lit for taking measurements in dark areas/poor lighting conditions.
- Connector jack for External Mains Adapter (Optional) : The instrument can be operated from Mains Supply(230VAC) instead of Batteries using an external Mains Adapter (230VAC /9VDC,500mA (4.5VA) Isolated)
- Test Voltages 50V/ 100V/ 250V,/500V /1000V : Test voltages from 50V to 1000V can be selected for Insulation Resistance measurement .It covers all insulation tests up to 1000V
- Insulation Resistance measurement: The instrument is capable of measuring insulation resistance from 10 kW…2 GW
- Low Resistances measurement: 0.01 W ... 99.9 W Low resistances can be measured up to 99.9 W. There are two measuring ranges for Low W.: 9.99W and 99.9W
- Hands-free continuity testing: Continuity testing (0-10 W with acoustic signal) can be done without pressing the test button. In addition to the display function, an acoustic signal can be activated which sounds if the adjustable limit value is violated.
- Voltmeter: Instrument measures voltages >25V …600V AC/DC
- Automatic discharge for capacitive circuits after test measurement: Capacitive devices under test, such as cables and windings, that get charged during the test, are discharged by the tester.
- Live circuit detection: Displays presence of voltages 25V irrespective of function selected.
- Pre-selectable limit checks (Go / No-Go option) for MW/GW An acoustic signal can be generated when the measured value of insulation resistance falls below an adjustable limit value.
- Lead resistance null facility: The instrument provides a facility to compensate the resistance of the leads for an accurate measurement of low resistances.
- Storage of MIN / MAX values In addition to the display of the actual measured value, the minimum or maximum value can constantly be updated or stored
- Storage Memory for last 10 readings. The instrument provides a facility to store and recall 10 values in each of the 5 ranges of insulation resistance measurement, Continuity and Resistance measurement.
- Blown fuse indication. The display FUSE points to a blown fuse.
- Low battery indication. Automatic display of the Symbol “ ” when battery cells are exhausted.
- Stop Watch. : This function allows you to measure elapsed time up to 1 hour.
- Auto-power off function : The instrument turns off automatically, if any of the keys or the selector switch have not been activated for about 10 minutes in insulation range and 5 minutes in other ranges or can be switched to continuous operation.
- Protective holster for rough duty . A holster of soft rubber with tilt stand protects the meter against damage in the case of shock and drop
| |
| Content | | “MECO-G” has introduced a new & advanced multi-range 3½ Dgt. (1999 Counts) Digital Insulation Tester Model: R-DIT945K-1. It has 6 Voltage Ranges i.e. 100V/250V/500V/1000V/2500V/5000V. R-DIT945K-1 has three Ohms (W) ranges, 0-200MW, 200MW-10GW and 10GW-2000GW. | Meco Digital Insulation Tester, DIT-99C is available with the range 0-200 M Ohms. It is paired with accessories like 1 x Pair of Crocodile / Alligator Test Leads (Red & Black)|1 x Carrying Case|6 x 1.5V AA Batteries (Fitted - In)|1 x Operation Manual. The DC voltage of this tool is 500 volt and the resolution is 0.1 M Ohms. The product is available with 1 year warranty period and that is why it is more reliable and durable. This digital insulation tester is available from the reputed brand that offers great services and a better working experience. | MECO DIT-99B Digital Insulation Tester has the following features: 3 Digit 17mm LCD Display; High Accuracy (3% rdg + 2 dgt); Single Person Push Button Operation; Designed to Generally Conform to IS 10656-1983; Meets Requirement of IEC1010 Installation Category II 100V Phase Earth; Terminal Voltage : >85% of Rated Voltage for Insulation; Resistance Measurement from10% to 100% of the Insulation Resistance Range; Carrying Case | RISH Insu 20 digital insulation and continuity tester is suitable for following:
• Measurement of the insulation resistance on electrically dead equipment and systems with test voltages up to 1000V.
• For Testing Motors, Transformers, generators, switchgear
• For testing of House hold appliances
• Measurement of the insulation resistance of Cables.
• Very useful for on- site maintenance and service departments | MECO DIT-99A Digital Insulation Tester has the following features: 3 Digit 17mm LCD Display; High Accuracy (3% rdg + 2 dgt); Single Person Push Button Operation; Designed to Generally Conform to IS 10656-1983; Meets Requirement of IEC1010 Installation Category II 100V Phase Earth; Terminal Voltage : >85% of Rated Voltage for Insulation; Resistance Measurement from10% to 100% of the Insulation Resistance Range; Carrying Case |
Reviews
There are no reviews yet.