| Description | SPECIFICATIONS :
- INSULATION TEST VOLTAGE : 1000V DC
- OPERATING TEMPERATURE : 0°C to 50°C
- INSULATION RESISTANCE TEST RANGE : 0-200 MΩ
- INSULATION RESISTANCE ACCURACY : ±(3%rdg+2dgt)
FEATURES :
- 3½ Digit 17mm LCD Display
- Terminal Voltage more than 85% of rated Voltage for Insulation Resistance Measurement from 10% to 100% of the Insulation Resistance Range
| SPECIFICATIONS :
- DC VOLTAGE : 250 V
- RANGES : 0 - 200 M Ohms
- RESOLUTION : 0.1 M Ohms
FEATURES :
- Testing insulation is essential to keeping wires and motors working properly.
- The analog insulation tester will measure the resistance in ohms and will display the results on a dial.
- It can also be used on the wire insulation, as well as cables and cords.
- The analog insulation tester is made up of a set of probes that are inserted into the insulation to test the insulation resistance.
| SPECIFICATIONS :
- DC VOLTAGE : 500 V
- RANGES : 0 - 200 M Ohms
- DIMENSIONS : 123x270x35 mm
- RESOLUTION : 0.1 M Ohms
FEATURES :
- Large, Easy to Read Display.
- Low Battery Indicator.
- Fault Protection, Buzzer Alarms If Short Circuit.
- Dimension: (D) Millimetre.
- Standard Accessories: Soft Carrying Case, Probe & Manual.
- Non Contact Voltage (NVC).
- True RMS Sensing.
| SPECIFICATIONS
- Function : Insulation resistance test, voltage test, current test, capacitance test
- Rated Voltage : 500V; 1000V 2500V; 5000V; 10 KV; 15KV
Accuracy Rated Voltage : (1±10%)
- Resistance Limit Range : 0.01MΩ -50TΩ
Accuracy : ±3%rdg±5dgt
Resolution : 0.01MΩ
- Output Short Circuit Current : ≥6mA
- DC Voltage Range : 0.1~1000V
Accuracy : ±1.5%rdg±5dgt
Resolution : 0.1V
- AC Voltage Range : 0.1~750V
Accuracy : ±1.5%rdg±5dgt
Resolution : 0.1V
- DC current measurement : 0.01nA~6mA
Accuracy : ±5%rdg±5dgt
Resolution : 0.01nA
- Capacitance Test : 10nF~60uF
Accuracy Test : ±10%rdg±5dgt
Resolution : 10nF
- Absorption ratio and polarization index measurement power : Have
- Weight : 2720g (including battery)
- Power Consumption : Standby: 30mA Max (backlight off) | Turn on backlight: 42mA Max | Measure：200mA Max(backlight off)
- Insulation Resistance : ≥50MΩ(between Measuring line and housing
- Pressure Resistance : AC3kV/50Hz 1min
- Working Temperature & Humidity : -10%ºC+50ºC＜85%RH
- Operating Temperature & Humidity : -10%ºC+55ºC＜90%RH
FEATURES
-
- Polarization Index (PI)
- Dielectric Absorption (DAR)
- Auto Power Off (APO 15 Minutes)
- USB Interface
- High Voltage Indication
- Meter 1PC
- High voltage bar 1PC Red
- High voltage test line 2PCS (Black, Green each 1)
- Monitoring Software CD 1PC
- USB communication line USB 1PC
- Charger 1PC
- Manual, certificate 1 Set
- Instrument Box 1PC
| SPECIFICATIONS
- Test Voltage : 100V/250V/500V ±10%
Range : 0.1~20MΩ
Accuracy : ±(3% + 5dgts)
Resolution : 0.01MΩ
- Test Voltage : 1000V/2500V/5000VDC ±10%
Range : 200MΩ~10GΩ
Accuracy : ±(5% + 10dgts)
Resolution : 0.01MΩ
- Display : 3½ Dgt. (1999 Counts) Large LCD Display with 29mm Display Height.
- Accuracy : ±(3% + 5dgts)
- Operating Temperature : 0°C to 40°C (RH £ 85%)
- Storage Temperature : -10°C to 50°C (RH £ 75%)
- Dimensions : 190 x 155 x 75 mm
- Weight : Approx 900g
- Power : 12V (8 x 1.5V) (R6AA size batteries) or AC Adaptor 12VDC
FEATURES
- 3½ Digit (1999 Counts) Large Display with Back light
- LED Indicator for HV (High Voltage)
- High Accuracy ±(3% + 2dgts) for Insulation Measurement.
- In-build Protection Circuit to prevent the damage reverse voltages .
- LCD Back Light Function with Indicator Switch.
- Battery Operated / AC adapter
- 6 Ranges of Insulation Measurement.
- Display with Annunciators
- Suitable for calculation PI and DAR (manually)
- Auto-Ranging (Insulation Measurement)
- As per IS10656-1983
- As per EMC standard IEC 61326-1 Class B
- Over Voltage CAT III, 600V
- AS per Safety Standard IEC/EN 61010-1 & 61010-31
- IP-44 Protection
| |
| Content | All Meco DIT-99D Digital Insulation tester IRT Range 0-200M Ohm are manufactured by using quality assured material and advanced techniques, which make them up to the standard in this highly challenging field. The materials utilized to manufacture Meco DIT-99D Digital Insulation tester IRT Range 0-200M Ohm, are sourced from the most reliable and official vendors, chosen after performing detailed market surveys. Meco products are widely acknowledged in the market for their high quality. We are dedicatedly involved in providing an excellent quality array of Meco Insulation Testers | MECO DIT-99B Digital Insulation Tester has the following features: 3 Digit 17mm LCD Display; High Accuracy (3% rdg + 2 dgt); Single Person Push Button Operation; Designed to Generally Conform to IS 10656-1983; Meets Requirement of IEC1010 Installation Category II 100V Phase Earth; Terminal Voltage : >85% of Rated Voltage for Insulation; Resistance Measurement from10% to 100% of the Insulation Resistance Range; Carrying Case | Meco Digital Insulation Tester, DIT-99C is available with the range 0-200 M Ohms. It is paired with accessories like 1 x Pair of Crocodile / Alligator Test Leads (Red & Black)|1 x Carrying Case|6 x 1.5V AA Batteries (Fitted - In)|1 x Operation Manual. The DC voltage of this tool is 500 volt and the resolution is 0.1 M Ohms. The product is available with 1 year warranty period and that is why it is more reliable and durable. This digital insulation tester is available from the reputed brand that offers great services and a better working experience. | Digital insulation resistance meter also known as mega ohmmeter, high voltage insulation resistance tester, etc., for the insulation resistance test. The instrument has a large LCD screen gray backlit display, data storage, data access, alarm, automatic shutdown and other functions. At the same time, it also has the function of measuring DC voltage, AC voltage, absorption ratio and polarization index of DC voltage. The machine is beautiful and upscale, has a wide range, high resolution, convenient operation, easy to carry, accurate, reliable, stable performance, strong anti-interference ability. Moreover, it has a shockproof, dustproof, moisture-proof structure and is a commonly used and indispensable instrument for telecommunications, electricity, meteorology, computer rooms, oil fields, electromechanical installation and maintenance, and industrial enterprises that use electricity as industrial power or energy. It is suitable for measuring the resistance value of various insulating materials and the insulation resistance of transformers, motors, cables and electrical equipment.At the same time, it can output a variety of different voltage levels with the step-adjusting voltage function (for example, 15KV models can generate 12KV levels, which can be used more widely). | “MECO-G” has introduced a new & advanced multi-range 3½ Dgt. (1999 Counts) Digital Insulation Tester Model: R-DIT945K-1. It has 6 Voltage Ranges i.e. 100V/250V/500V/1000V/2500V/5000V. R-DIT945K-1 has three Ohms (W) ranges, 0-200MW, 200MW-10GW and 10GW-2000GW. | MECO DIT-99A Digital Insulation Tester has the following features: 3 Digit 17mm LCD Display; High Accuracy (3% rdg + 2 dgt); Single Person Push Button Operation; Designed to Generally Conform to IS 10656-1983; Meets Requirement of IEC1010 Installation Category II 100V Phase Earth; Terminal Voltage : >85% of Rated Voltage for Insulation; Resistance Measurement from10% to 100% of the Insulation Resistance Range; Carrying Case |
Reviews
There are no reviews yet.