| Description | SPECIFICATIONS :
- VOLTAGE RANGE : 0-2000 M ohms
- TEMPERATURE : 0� to 50�C
FEATURES :
- 5 Models with various Voltage and M Ohm Ranges,
- Single Person Push Button Operation, High Voltage LED Indication
| SPECIFICATIONS
- Function : Insulation resistance test, voltage test, current test, capacitance test
- Rated Voltage : 250; 500; 1000; 2500; 5KV; 10KV
Accuracy Rated Voltage : (1±10%)
- Resistance Limit Range : 0.01MΩ -35TΩ
Accuracy : ±3%rdg±5dgt
Resolution : 0.01MΩ
- Output Short Circuit Current : ≥6mA
- DC Voltage Range : 0.1~1000V
Accuracy : ±1.5%rdg±5dgt
Resolution : 0.1V
- AC Voltage Range : 0.1~750V
Accuracy : ±1.5%rdg±5dgt
Resolution : 0.1V
- DC current measurement : 0.01nA~6mA
Accuracy : ±5%rdg±5dgt
Resolution : 0.01nA
- Capacitance Test : 10nF~60uF
Accuracy Test : ±10%rdg±5dgt
Resolution : 10nF
- Absorption ratio and polarization index measurement power : Have
- Weight : 2720g (including battery)
- Power Consumption : Standby: 30mA Max (backlight off) | Turn on backlight: 42mA Max | Measure：200mA Max(backlight off)
- Insulation Resistance : ≥50MΩ(between Measuring line and housing
- Pressure Resistance : AC3kV/50Hz 1min
- Working Temperature & Humidity : -10%ºC+50ºC＜85%RH
- Operating Temperature & Humidity : -10%ºC+55ºC＜90%RH
FEATURES
-
- Polarization Index (PI)
- Dielectric Absorption (DAR)
- Auto Power Off (APO 15 Minutes)
- USB Interface
- High Voltage Indication
- Meter 1PC
- High voltage bar 1PC Red
- High voltage test line 2PCS (Black, Green each 1)
- Monitoring Software CD 1PC
- USB communication line USB 1PC
- Charger 1PC
- Manual, certificate 1 Set
- Instrument Box 1PC
| SPECIFICATIONS
- Rated Voltage : 250 V / 500v / 1000v / 2500v / 5000v
- Accuracy : ±5%rdg±3dgt ±20%rdg (100GΩ or more)
- Short Circuit Current : 1.5mA
- Dimensions : 177 (L) × 226 (W) × 100 (D) mm / 300 (L) × 315 (W) × 125 (D) mm (Hard case)
- Weight : 3125A: 1.9kg approx. (including batteries) 4kg approx. (including accessories)
FEATURES
- Insulation Resistance up to 1TΩ
- Short-Circuit Current up to 1.5mA
- Wide Test Voltage from 250V to 5000V
- Diagnosis Function of PI and DAR
- Newly-designed alligator clip
- It comes with a tough hard case
- Filter function reduces noise interference for obtaining stable measurement
- Large display with Bar Graph indication and backlight
- Live voltage warning
- Safety standard IEC 61010-1 CAT IV 300V / CAT III 600V
| SPECIFICATIONS
- AC/DC Voltage Measurement
Range : 600.0 V
Resolution : 0.1V
Accuracy : 50 Hz to 400 Hz ±(% of Rdg + Digits) ±(2% + 3)
- Earth Bond Resistance Measurement
Range : 20.00 Ω to 20.00 kΩ
Resolution : 0.01 Ω to 0.01 kΩ
Accuracy : ±(1.5% + 3)
- Insulation Specifications
Range : 0.01 MΩ to 2000 MΩ
Test Voltage : 500 V, 1000 V
Test Voltage Accuracy : + 20%, - 0%
- Storage temperature : -40°C to 60°C (-40°F to 140°F)
- Operating temperature : -20°C to 55°C (-4°F to 131°F)
- Vibration : Random, 2 g, 5-500 Hz per MIL-PRF-28800F, Class 2 instrument
- Safety : Complies with ANSI/ISA 82.02.01 (61010-1) 2004, CAN/CSA-C22.2 NO. 61010-1-04, and IEC/EN 61010-1 2nd Edition for measurement category IV 600 V (CAT IV)
- Certifications : CSA per standard CSA/CAN C22.2 No. 61010.1-04; TUV per standard IEC/EN 61010-1 2nd Edition
- Size : 5.0 x 10.0 x 20.3 cm (1.97 x 3.94 x 8.00 in)
- Weight : 550g
- IP Rating : IP40
FEATURES
- A rugged, compact insulation resistance tester for residential and commercial electricians
- Performs insulation tests from 0.01 MΩ to 2000 MΩ
- Offers two insulation test voltages: 500 V and 1000 V
- Includes live circuit detection to prevent insulation test if voltage >30 V is detected
- Measures resistance from 0.01 Ω to 20.00 kΩ
| SPECIFICATIONS :
- DC VOLTAGE : 500 V
- RANGES : 0 - 200 M Ohms
- DIMENSIONS : 123x270x35 mm
- RESOLUTION : 0.1 M Ohms
FEATURES :
- Large, Easy to Read Display.
- Low Battery Indicator.
- Fault Protection, Buzzer Alarms If Short Circuit.
- Dimension: (D) Millimetre.
- Standard Accessories: Soft Carrying Case, Probe & Manual.
- Non Contact Voltage (NVC).
- True RMS Sensing.
| SPECIFICATIONS
- Temperature Coefficient : <0.1% per °C
- Operating Temperature : -20°C To +40°C (full range) -20°C To +60°C (upto 100M )
- Storage Temperature : -25°C To +65°C
- Relative Humidity : 90% RH at 40°C max.
- Display : LCD display Field (65 mm x 30mm) with analog indication and digital display and with display of unit of measured quantity and functions
- Dimensions : 84 mm x 195 mm x 35 mm
- Weight : 500 g including battery
FEATURES
- Analog + Digital Display ( Log scale for Insulation Measurement) : The Analog scale for insulation resistance measurement is Logarithmic in nature which gives the dynamic performance of an Analog insulation tester. The Analog scale is linear for low Ohm and Voltage measurement.
- User Selectable Backlit Display: The instrument is provided with user selectable Back lit for taking measurements in dark areas/poor lighting conditions.
- Connector jack for External Mains Adapter (Optional) : The instrument can be operated from Mains Supply(230VAC) instead of Batteries using an external Mains Adapter (230VAC /9VDC,500mA (4.5VA) Isolated)
- Test Voltages 50V/ 100V/ 250V,/500V /1000V : Test voltages from 50V to 1000V can be selected for Insulation Resistance measurement .It covers all insulation tests up to 1000V
- Insulation Resistance measurement: The instrument is capable of measuring insulation resistance from 10 kW…2 GW
- Low Resistances measurement: 0.01 W ... 99.9 W Low resistances can be measured up to 99.9 W. There are two measuring ranges for Low W.: 9.99W and 99.9W
- Hands-free continuity testing: Continuity testing (0-10 W with acoustic signal) can be done without pressing the test button. In addition to the display function, an acoustic signal can be activated which sounds if the adjustable limit value is violated.
- Voltmeter: Instrument measures voltages >25V …600V AC/DC
- Automatic discharge for capacitive circuits after test measurement: Capacitive devices under test, such as cables and windings, that get charged during the test, are discharged by the tester.
- Live circuit detection: Displays presence of voltages 25V irrespective of function selected.
- Pre-selectable limit checks (Go / No-Go option) for MW/GW An acoustic signal can be generated when the measured value of insulation resistance falls below an adjustable limit value.
- Lead resistance null facility: The instrument provides a facility to compensate the resistance of the leads for an accurate measurement of low resistances.
- Storage of MIN / MAX values In addition to the display of the actual measured value, the minimum or maximum value can constantly be updated or stored
- Storage Memory for last 10 readings. The instrument provides a facility to store and recall 10 values in each of the 5 ranges of insulation resistance measurement, Continuity and Resistance measurement.
- Blown fuse indication. The display FUSE points to a blown fuse.
- Low battery indication. Automatic display of the Symbol “ ” when battery cells are exhausted.
- Stop Watch. : This function allows you to measure elapsed time up to 1 hour.
- Auto-power off function : The instrument turns off automatically, if any of the keys or the selector switch have not been activated for about 10 minutes in insulation range and 5 minutes in other ranges or can be switched to continuous operation.
- Protective holster for rough duty . A holster of soft rubber with tilt stand protects the meter against damage in the case of shock and drop
|
| Content |
Meco DIT-99E Digital Insulation tester IRT Range 0-2000M Ohm is a premium quality product from Meco. All Meco DIT-99E Digital Insulation tester IRT Range 0-2000M Ohm are manufactured by using quality assured material and advanced techniques, which make them up to the standard in this highly challenging field. The materials utilized to manufacture Meco DIT-99E Digital Insulation tester IRT Range 0-2000M Ohm, are sourced from the most reliable and official vendors, chosen after performing detailed market surveys. Meco products are widely acknowledged in the market for their high quality. We are dedicatedly involved in providing an excellent quality array of Meco | Digital insulation resistance meter also known as mega ohmmeter, high voltage insulation resistance tester, etc., for the insulation resistance test. The instrument has a large LCD screen gray backlit display, data storage, data access, alarm, automatic shutdown and other functions. At the same time, it also has the function of measuring DC voltage, AC voltage, absorption ratio and polarization index of DC voltage. The machine is beautiful and upscale, has a wide range, high resolution, convenient operation, easy to carry, accurate, reliable, stable performance, strong anti-interference ability. Moreover, it has a shockproof, dustproof, moisture-proof structure and is a commonly used and indispensable instrument for telecommunications, electricity, meteorology, computer rooms, oil fields, electromechanical installation and maintenance, and industrial enterprises that use electricity as industrial power or energy. It is suitable for measuring the resistance value of various insulating materials and the insulation resistance of transformers, motors, cables and electrical equipment.At the same time, it can output a variety of different voltage levels with the step-adjusting voltage function (for example, 15KV models can generate 12KV levels, which can be used more widely). | Kyoritsu High Voltage Insulation Tester 250-5000V KEW-3125A is a premium quality product from KyoritsuDSF. All Kyoritsu High Voltage Insulation Tester 250-5000V KEW-3125A are manufactured by using quality assured material and advanced techniques, which make them up to the standard in this highly challenging field. The materials utilized to manufacture Kyoritsu High Voltage Insulation Tester 250-5000V KEW-3125A, are sourced from the most reliable and official vendors, chosen after performing detailed market surveys. Kyoritsu products are widely acknowledged in the market for their high quality. We are dedicatedly involved in providing an excellent quality array of Kyoritsu Insulation Testers. | The Fluke 1503 is a great choice for basic residential and commercial electrical insulation testing. This rugged, compact tool fits in the palm of your hand. The 1503 is the same form factor as the Fluke 1507 but with a few less features. You can count on it to handle the most common tests at a most affordable price. Additional features, like the remote probe, reduce the time needed to perform repetitive testing. | Meco Digital Insulation Tester, DIT-99C is available with the range 0-200 M Ohms. It is paired with accessories like 1 x Pair of Crocodile / Alligator Test Leads (Red & Black)|1 x Carrying Case|6 x 1.5V AA Batteries (Fitted - In)|1 x Operation Manual. The DC voltage of this tool is 500 volt and the resolution is 0.1 M Ohms. The product is available with 1 year warranty period and that is why it is more reliable and durable. This digital insulation tester is available from the reputed brand that offers great services and a better working experience. | RISH Insu 20 digital insulation and continuity tester is suitable for following:
• Measurement of the insulation resistance on electrically dead equipment and systems with test voltages up to 1000V.
• For Testing Motors, Transformers, generators, switchgear
• For testing of House hold appliances
• Measurement of the insulation resistance of Cables.
• Very useful for on- site maintenance and service departments |
Reviews
There are no reviews yet.