HIOKI DT-4255 Digital Multimeter

Brands: HIOKI

Category: MULTIMETER

Availability: In Stock

SPECIFICATIONS

DC Voltage range : 600.0 mV to 1000 V , 5 ranges
Accuracy : ±0.3 % rdg. ±3 dgt.
AC Voltage range : 6.000 V to 1000 V, 4 ranges, Frequency characteristics: 40 Hz – 1 kHz
Accuracy : 40 – 500 Hz : ±0.9 % rdg. ±3 dgt. (True RMS, crest factor 3)
Resistance range : 600.0 Ω to 60.00 MΩ, 6 ranges, Basic accuracy: ±0.7 % rdg. ±3 dgt.
AC Current Range ( use with Clamp on probes ) : 10.00 A to 1000 A, 7 ranges, Add the Clamp on probe accuracy to basic accuracy 40 – 1 kHz : ±0.9 % rdg. ±3 dgt. (True RMS, crest factor 3)
Voltage Detection : Hi: AC40 V to 600 V, Lo: AC80 V to 600 V
Frequency Range : 99.99 Hz to 99.99 kHz, 4 ranges (limited by the minimum detectable voltage),
Accuracy : ±0.1 % rdg. ±1 dgt
Capacitance Range : 1.000 μF to 10.00 mF, 5 ranges
Accuracy : ±1.9 % rdg. ±5 dgt.
Continuity check : Continuity threshold [ON]: 25 Ω or less , [OFF]: 245 Ω or more, Response time: 0.5 ms or more
Diode Test : Open terminal voltage: 5.0 V or less, Testing current 0.5 mA or less, Threshold of forward voltage: 0.15 V to 1.5 V
Display : Main and sub displays: 4-digits LCD, max. 6000 digits, bar graph
Display Refresh Rate : 5 times/s (Capacitance measurement: 0.05 to 5 times/s, depending on measured value, Frequency: 1 to 2 time/s, Temperature: 1 time/s )
Dimensions : 84 mm (3.31 in)W × 174 mm (6.85 in)H× 52 mm (2.05 in)D
Mass : 390 g (13.8 oz) (including batteries and holster)
Including Accessories : Test lead L9207-10 ×1, Holster ×1, Instruction manual ×1, LR03 alkaline battery ×4

FEATURES

Prevents short-circuit accidents with a fast-blow fuse and current-limiting resistor (DT4255)
Low-pass filter cuts high harmonics (when measuring inverter fundamental waveforms)
Prevents accidents with clamp-on sensor-based current measurement (DT4254, DT4255)
Broad -25°C to 65°C (-13°F to 149°F) operating temperature range (DT4254, DT4255)
Voltage detection function (DT4254, DT4255)
Dual display lets you check voltage and frequency simultaneously

Category: MULTIMETER

Description
Reviews (0)

Description

The 4200 Series Hioki Digital Multimeter Series consist of a complete lineup of 9 models ranging from professional to industrial to pocket meters, delivering a super fast response rate and safety features that take electrical testing to a higher level. The DT4255 is a digital multimeter designed for maximum safety with voltage measurement terminals that are protected by a fuse.

Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “HIOKI DT-4255 Digital Multimeter”

Quick Comparison

Settings	HIOKI DT-4255 Digital Multimeter remove	MECO 135B+ TRMS DIGITAL MULTIMETER remove	HTC DM-91 DIGITAL MULTIMETER remove	MECO 153B+ TRMS DIGITAL MULTIMETER remove	BEETECH H-901 3 1/2 1000V / 750V AC 20A AC/DC DIGITAL MULTIMETER remove	MECO-G R-36B DIGITAL MULTIMETER remove
Name	HIOKI DT-4255 Digital Multimeter remove	MECO 135B+ TRMS DIGITAL MULTIMETER remove	HTC DM-91 DIGITAL MULTIMETER remove	MECO 153B+ TRMS DIGITAL MULTIMETER remove	BEETECH H-901 3 1/2 1000V / 750V AC 20A AC/DC DIGITAL MULTIMETER remove	MECO-G R-36B DIGITAL MULTIMETER remove
Image
SKU
Rating
Price
Stock
Availability
Add to cart	Read more	Read more	Read more	Read more	Read more	Read more
Description	SPECIFICATIONS DC Voltage range : 600.0 mV to 1000 V , 5 ranges Accuracy : ±0.3 % rdg. ±3 dgt. AC Voltage range : 6.000 V to 1000 V, 4 ranges, Frequency characteristics: 40 Hz - 1 kHz Accuracy : 40 - 500 Hz : ±0.9 % rdg. ±3 dgt. (True RMS, crest factor 3) Resistance range : 600.0 Ω to 60.00 MΩ, 6 ranges, Basic accuracy: ±0.7 % rdg. ±3 dgt. AC Current Range ( use with Clamp on probes ) : 10.00 A to 1000 A, 7 ranges, Add the Clamp on probe accuracy to basic accuracy 40 - 1 kHz : ±0.9 % rdg. ±3 dgt. (True RMS, crest factor 3) Voltage Detection : Hi: AC40 V to 600 V, Lo: AC80 V to 600 V Frequency Range : 99.99 Hz to 99.99 kHz, 4 ranges (limited by the minimum detectable voltage), Accuracy : ±0.1 % rdg. ±1 dgt Capacitance Range : 1.000 μF to 10.00 mF, 5 ranges Accuracy : ±1.9 % rdg. ±5 dgt. Continuity check : Continuity threshold [ON]: 25 Ω or less , [OFF]: 245 Ω or more, Response time: 0.5 ms or more Diode Test : Open terminal voltage: 5.0 V or less, Testing current 0.5 mA or less, Threshold of forward voltage: 0.15 V to 1.5 V Display : Main and sub displays: 4-digits LCD, max. 6000 digits, bar graph Display Refresh Rate : 5 times/s (Capacitance measurement: 0.05 to 5 times/s, depending on measured value, Frequency: 1 to 2 time/s, Temperature: 1 time/s ) Dimensions : 84 mm (3.31 in)W × 174 mm (6.85 in)H× 52 mm (2.05 in)D Mass : 390 g (13.8 oz) (including batteries and holster) Including Accessories : Test lead L9207-10 ×1, Holster ×1, Instruction manual ×1, LR03 alkaline battery ×4 FEATURES Prevents short-circuit accidents with a fast-blow fuse and current-limiting resistor (DT4255) Low-pass filter cuts high harmonics (when measuring inverter fundamental waveforms) Prevents accidents with clamp-on sensor-based current measurement (DT4254, DT4255) Broad -25°C to 65°C (-13°F to 149°F) operating temperature range (DT4254, DT4255) Voltage detection function (DT4254, DT4255) Dual display lets you check voltage and frequency simultaneously	SPECIFICATIONS : BATTERY : Two 1.5bV 'AAA' Battery DIMENSION : 130 x 65 x 32mm (approx.) TEMPERATURE : -20 deg C ~ 1000 deg C / -4 deg F ~ 1832 deg F WEIGHT : 130gms Including Battery (approx.) FEATURES : TRMS Auto / Manual Ranging 9999 Count LCD with Backlight Auto Power Off Capacitance Resistance NCV Frequency Duty Cycle Temperature Diode Test Audible Continuity Data Hold	SPECIFICATIONS DC VOLTAGE RANGE : 1000V AC VOLTAGE RANGE : 700V RESISTANCE RANGE : 200MΩ DC CURRENT RANGE : 10A AC CURRENT RANGE : 10A FREQUENCY RANGE : 200KHz TRANSISTOR hFE TEST : NPN or PNP TEMPERATURE RANGE : 400 ⁓ 1000 FEATURES 3½ Digit Manual Multimeter with Backlight 1,999 Count Auto Power Off (APO) under natural operation Terminal Shutter Interlock Mechanism	SPECIFICATIONS : AC VOLTAGE : 60 to 600mV, 6 to 750 V DC VOLTAGE : 600 mV6/60/600/1000 V AC CURRENT : 600, 6000A, 60, 600mA, 6 & 20 Amp DC CURRENT : 600Amp, 6000Amp, 60mA, 600mA, 6 & 20 Amp SENSITIVITY : 1 to 36 V AC RESISTANCE : 600/6/60/600 K6/60 M FREQUENCY : 99.99Hz to 10 MHz FEATURES : Has Trms Sensor Type. Easy to Carry. Auto Power Off. Audible Continuity. Lcd with Backlight. Diode Test, Audible Continuity, Data Hold. It can Measure High Voltage. The Upper Limit of the Frequency if 20 MHz.	SPECIFICATIONS DC Voltage : 1000V AC Voltage : 750V DCA : 20A ACA : 20A Capacitance : 200uF Resistance : 2000MΩ Frequency: 200kHz Temperature : -20°C to 1000°C FEATURES Display Mode: 31/2 LCD display Maximum Display: 1999, updates every 2-3s Measuring method: Dual – slope integration A/D converter AC & DC Voltage AC & DC Current Capacitance Resistance Frequency Temperature Over range display: “1” displayed Low battery indication: Polarity indication: “-” displayed for negative polarity Display Mode: 31/2 LCD display Maximum Display: 1999, updates every 2-3s Measuring method: Dual – slope integration A/D converter AC & DC Voltage AC & DC Current Capacitance Resistance Frequency Temperature Over range display: “1” displayed Low battery indication: Polarity indication: “-” displayed for negative polarity Power supply: 9V Dimensions: 189(L) x 91(W) x 31.5mm(H) Weight: ≈ 280g (battery included) Operating environment: 0˚C ~ 40˚C Storage environment: -10˚C ~ 50˚C Accuracies are guaranteed for 1 year, 18˚C - 28 ˚C , less than 80% RH Fuse protection: F 500mA/250V Maximum voltage between terminals and earth ground: 1000VDC or 700VAC	SPECIFICATIONS : DC VOLTAGE : 1000V AC VOLTAGE : 750V DC CURRENT : 10V RESISTANCE : 20 M ohms TEMPERATURE : -20℃ to 1370℃ FREQUENCY RANGE : 40Hz - 400Hz FEATURES : LCD Display DATA HOLD button BACK LIGHT button FUNCTION AND RANGE SWITCH "10A" Jack "COM" Jack "V ohms m A" Jack
Content	The 4200 Series Hioki Digital Multimeter Series consist of a complete lineup of 9 models ranging from professional to industrial to pocket meters, delivering a super fast response rate and safety features that take electrical testing to a higher level. The DT4255 is a digital multimeter designed for maximum safety with voltage measurement terminals that are protected by a fuse.		This 3 digits display digital Multimeter comes with 2000 counts and an Interlocking terminal. Equipped with a built-in hanging kit, test leads, and holster, this Multimeter is available in various specifications and affordable prices. HTC is one of the most trusted and renowned brands which manufactures all its products using superior quality raw materials, advanced technologies, and utmost precision. This HTC DM-91 digital Multimeter is widely acknowledged in the market for higher accuracy, efficiency, compact design, easy handling, user-friendly operations, and longer life. The special functions of this device include the diode test, transistor testing, and continuity buzzer. Applicable for commercial, residential, and industrial sectors, this device is very durable and reliable. The performance of this device is superb with accurate readings. Get this digital Multimeter online in various other specifications and features as per your specific requirements.	The Meco Autoranging Digital Multimeter is a top-of-the-line device that is best for electricians, technicians, and engineers. It offers a wide range of features, including autoranging, data hold, and a large LCD screen. The Meco MT6000 digital multimeter is a handheld device that is used to measure voltage, current, and resistance. It has a 3 digit LCD display and dimensions of 180x90x52 mm. The device can measure voltages from 60 to 1000 V, currents from 6 to 6000 mA, and resistances from 600 to 60000 ohms. With practical features like a backlight and multiple measurement ranges, this meter is best for use in a variety of applications.	The meter is a hand held 3 ½ digital multimeter for measuring DC and AC voltage, DC and AC current, resistance, diode, transistor, frequency, temperature, capacitance and continuity test with battery operated. The back light of display is optional. This multimeter is designed according to IEC – 1010 concerning electronic measuring instruments with an overvoltage category (CATII) and pollution 2.	Meco-G R-36B Digital Multimeter AC Voltage Range 200V to 500V is a reliable and accurate product that is perfect for measuring AC voltage. It has a range of 200V to 500V and is easy to use. MECO-G digital multimeter is a precision instrument that can measure DC and AC voltage, DC and AC current, and resistance. It is easy to use and has a large, easy-to-read 3-digit display.
Weight
Dimensions	N/A	N/A	N/A	N/A	N/A	N/A
Additional information