An LCR meter is a type of electronic test equipment used to measure the inductance (L), capacitance (C), and resistance (R) of an electronic component.[1] In the simpler versions of this instrument the impedance was measured internally and converted for display to the corresponding capacitance or inductance value. Readings should be reasonably accurate if the capacitor or inductor device under test does not have a significant resistive component of impedance. More advanced designs measure true inductance or capacitance, as well as the equivalent series resistance of capacitors and the Q factor of inductive components.

Showing all 4 results

  • BEETECH H-530 3 1/2 DIGITS LCR METER

    SPECIFICATIONS

    Capacitance

    • Range : 2000uF
    • Accuracy : ± (5%+5)
    • Resolution : 1uF

    Inductance

    • Range : 20H
    • Accuracy : ± (0.5%+ 1)
    • Resolution : 10mH

    Resistance

    • Range : 20M
    • Accuracy : ± (0.5%+ 1d)
    • Resolution : 1nF

    FEATURES

    • Display Mode: 3 1/2 LCD display
    •  Maximum Display: 1999
    •  Sampling rate: 3 times/s
    •  Low battery indication & Data Hold
    •  Auto Power Off
    •  9 Volt Battery
    Read more

  • HTC LCR-4070 Digital LCR Meter

    SPECIFICATIONS

    CAPACITANCE

    • RANGE : 200pF
    • RESOLUTION : 0.1pF
    • ACCURACY : ±2.5% of rdg + 5 digits

    RESISTANCE

    • RANGE : 20Ω
    • RESOLUTION : 0.01Ω
    • ACCURACY : ±1.0% of rdg + 5 digits

    INDUCTANCE

    • RANGE : 200µH
    • RESOLUTION  : 0.1µH
    • ACCURACY : ±3.0% of rdg + 5 digits

    FEATURES

    • 3½ Digit Display
    • 1,999 Count
    • Full Protection function, capacitor with the function of Self discharge
    • Auto Power Off (APO

    SPECIAL FUNCTIONS

    • Low Battery Indication Approx. <7.5V
    • Sampling Rate 3 times per second
    • Capacitance discharge protection ✔
    • Power 9V (6F22) x 1
    • Standard Accessories : Soft Carrying Case, Test Lead, Manual
    • Dimension : 185(H) x 93(W) x 35(D)mm
    Read more

  • HTC LCR-4080Q LCD Display LCR-Q Meter

    SPECIFICATIONS

    • Resistance Accuracy : ±(1.0%+5)
    • Counts : 19999
    • Inductance Gear Display Range : 20mH-2000H
    • Capacitance Range : 20nF-20mF
    • Frequency Range (Hz) : 100Hz/120Hz/1KHz/10KHz/100KHz
    • Inductance Gear Accuracy : ±(2%+5)
    • Resistance Min. : 0.01kΩ-1kΩ
    • Resistance Range : 200Ω-20MΩ
    • Inductance Gear Min. Resolution : 1pF-0.1mF

    FEATURES

    • LCR automatic identification/manual measurement
    • Open/short calibration
    • Power : 9V (6F22) X 1
    Read more

  • MECO 999A LCR METER

    SPECIFICATIONS :

    • RANGE : 0.00 to 14.00 pH
    • DIMENSIONS : 181 x 221 x 142 mm (7.1 x 8.7 x 5.6″)
    • RESOLUTION : 0.01 pH
    • INPUT IMPEDANCE : 1012 Ohm

    FEATURES : 

    • Basic measurement accuracy 0.1% & speed upto 10 meas / sec
    • Large LCD display with bright white backlight
    • Ultra low power consumption, battery powered for 24 hours of continuous use
    • Automatic identification function (Ai).
    • Percentage display & 4 tolerance comparator : 1%, 5%, 10% & 20%
    • 9V battery & External power supply
    • Automatic correction function with datahold, max. / min. / average recording
    • Utility function configuration & current setup recovery after power off
    • Standard Mini-USB interface, SCPI compatible
    • Auto power Off
    • Constant output impedance : 100 ohm
    Read more