A battery tester is an electronic device intended for testing the state of an electric battery, going from a simple device for testing the charge actually present in the cells and/or its voltage output, to a more comprehensive testing of the battery’s condition, namely its capacity for accumulating charge and any possible flaws affecting the battery’s performance and security.

Showing all 7 results

  • HIOKI BATTERY TESTER BT3554-51

    SPECIFICATIONS

    • Resistance measurement range : 3 mΩ (max. display 3.100 mΩ, resolution 1 μΩ) to 3 Ω (max. display 3.100 Ω, resolution 1 mΩ), 4 ranges
    • Accuracy : ±0.8 % rdg ±6 dgt (3 mΩ range: ±1.0 % rdg ±8 dgt)
    • Testing source frequency : 1 kHz ±30 Hz
    • Voltage measurement range : ± 6 V (max. display ±6.000 V, resolution: 1 mV) to ± 60 V (max. display ±60.00 V, resolution: 10 mV), 2 ranges
    • Temperature measurement accuracy :  -10°C to 60°C (14°F to 140°F), Maximum display: 60.0°C (140.0°F), Resolution 0.1°C (0.1°F)
    • Absolute max. input voltage : 60 V DC max. (No AC input)
    • Measurement time : 100 ms
    • Response time : Approx. 1.6 sec.
    • Power supply : LR6 (AA) Alkaline dry battery ×8
    • Continuous operating time: About 8.3 hr. (without Z3210 installed), About 8.2 hr. (with Z3210 installed and wireless communications active)
    • Communication interface : USB Bluetooth® wireless communications (when Z3210 installed)

    FEATURES

    • Battery measurement can be performed while the battery is connected to its host device, without taking it offline
    • Measure and save data in as fast as 2 seconds, a 60% improvement from the legacy 3554
    • Instantaneously diagnose battery degradation (PASS, WARNING, FAIL) by measuring internal resistance and voltage (*1)
    • Noise reduction technology improves noise resistance
    • Screen and audio (*2) guidance simplifies measurement
    • Measurement data is linked to site information and saved, reducing management man-hours
    • Easily transfer measurement data to your smartphone or tablet by using our free app GENNECT Cross (*3) or to an Excel® file. (Wireless Adapter Z3210 is necessary)
    • New protector delivers better ergonomic hold and durability in the field.
    Read more

  • HTC BM-36 BATTERY TESTER

    SPECIFICATIONS

    • Screen : 2.4″ Colour Screen
    • Application : 12V/24V Battery/ Electric Vehicle
    • Battery Lifespan : Show as Percentage
    • Voltage/CCA/Internal resistance : Yes
    • Start the test : Yes
    • Load Test : Yes
    • Charging test : Yes
    • Kelvin Probe test : Yes
    • Colour Screen operating system : Yes
    • Protection input for anti-polarity/Overvoltage : Yes
    • Built in Li-ion Battery : Yes

    FEATURES

    • 2.4” Inches Colour Screen
    • Test the Performance of 12V/24V Lead-Acid Battery
    • Battery Test Only Measure the Battery Life
    Read more

  • MECO BM 63 BATTERY TESTER

    SPECIFICATIONS : 

    • DC VOLTAGE RANGE : 2 to 12 V
    • BATTERY CAPACITY : 4-500 Ah
    • DIMENSIONS : 220x120x70 mm
    • DISPLAY : Analog

    FEATURES : 

    • Rated Voltage of Battery to be Tested: 2, 6, 12V DC.
    • Rated Capacity of Battery to be Tested: 4-500 Ah.
    • Measuring Time: <3 Sec.
    Read more

  • MECO DBM 72 DIGITAL BATTERY METER

    SPECIFICATIONS : 

    • BATTERY VOLTAGE : 6 & 12 V DC
    • DIMENSIONS : 205x115x70 mm
    • CERTIFICATIONS : CAT III 600V
    • RESISTANCE : Internal Battery Load Test & 4 – Wires Test: 0-99 mV
    • BATTERY CAPACITY : 40-200 Ah

    FEATURES : 

    • Auto Data Hold.
    • Overload Protection.
    • Missing Lead Detection.
    • Detects & Display Bad Cell.
    • Reverse Polarity Protection.
    • Built-In 10 Seconds Timer to Auto Cut-off Load After Test.
    Read more

  • MECO VBM6246 VEHICLE BATTERY SYSTEM

    SPECIFICATIONS: 

    • BATTERY VOLTAGE : 12 & 24 V
    • DIMENSIONS : 180x90x32 mm
    • RANGE : CCA Range: 100 to 1700 IEC Range: 100 to 1000
      EN Range: 100 to 1700 DIN Range: 100 to 1000

    FEATURES : 

    • Loose Lead Detection.
    • Reverse Polarity Protection.
    • Overload Protection to ensure Operator Safety.
    • Display of Battery Condition: Good/Ok/Pay Attention/Replace.

     

     

    Read more

  • MECO VBSM6129B – VEHICLE BATTERY SYSTEM METER

    SPECIFICATIONS :

     

    • CCA Range: 100 to 1700
    • IEC Range: 100 to 1000
    • EN Range: 100 to 1700
    • DIN Range: 100 to 1000FEATURES :
    • SUITABLE FOR : Battery Test, Engine Activation Load Test & Charging System Test.
    Read more

  • MECO VBSM6246P VEHICLE BATTERY SYSTEM

    SPECIFICATIONS : 

    • RATED  CAPACITY : 4 – 400 Ah
    • DIMENSION : 235x90x50 mm

    FEATURES : 

    • Key Parameters Measured for Diagnosis of Vehicle Battery & Electrical System
    • Display of Battery Condition [Good / Ok / Pay Attention / Replace]
    • Overload Protection to ensure Operator Safety
    • Loose Lead DetectionReverse Polarity Protectionl
    • Internal Unit Conversion CCA / IEC / EN / DIN
    • Battery Recharge Indicator, Detects and Displays Bad Cell, Overload Protection of Input Voltage
    Read more