HIOKI BATTERY TESTER BT3554-51

Brands:

Availability: In Stock

SPECIFICATIONS

  • Resistance measurement range : 3 mΩ (max. display 3.100 mΩ, resolution 1 μΩ) to 3 Ω (max. display 3.100 Ω, resolution 1 mΩ), 4 ranges
  • Accuracy : ±0.8 % rdg ±6 dgt (3 mΩ range: ±1.0 % rdg ±8 dgt)
  • Testing source frequency : 1 kHz ±30 Hz
  • Voltage measurement range : ± 6 V (max. display ±6.000 V, resolution: 1 mV) to ± 60 V (max. display ±60.00 V, resolution: 10 mV), 2 ranges
  • Temperature measurement accuracy :  -10°C to 60°C (14°F to 140°F), Maximum display: 60.0°C (140.0°F), Resolution 0.1°C (0.1°F)
  • Absolute max. input voltage : 60 V DC max. (No AC input)
  • Measurement time : 100 ms
  • Response time : Approx. 1.6 sec.
  • Power supply : LR6 (AA) Alkaline dry battery ×8
  • Continuous operating time: About 8.3 hr. (without Z3210 installed), About 8.2 hr. (with Z3210 installed and wireless communications active)
  • Communication interface : USB Bluetooth® wireless communications (when Z3210 installed)

FEATURES

  • Battery measurement can be performed while the battery is connected to its host device, without taking it offline
  • Measure and save data in as fast as 2 seconds, a 60% improvement from the legacy 3554
  • Instantaneously diagnose battery degradation (PASS, WARNING, FAIL) by measuring internal resistance and voltage (*1)
  • Noise reduction technology improves noise resistance
  • Screen and audio (*2) guidance simplifies measurement
  • Measurement data is linked to site information and saved, reducing management man-hours
  • Easily transfer measurement data to your smartphone or tablet by using our free app GENNECT Cross (*3) or to an Excel® file. (Wireless Adapter Z3210 is necessary)
  • New protector delivers better ergonomic hold and durability in the field.

Description

Hioki portable battery testers support the maintenance of UPS and storage batteries critical to the life support of all businesses. The BT3554-50 battery internal resistance tester sets the standard for assessing the deterioration and remaining life of UPS and other lead-acid batteries by giving a complete diagnosis via battery resistance testing. The specially designed L2020 Pin Type Lead further improves testing efficiency with an L-shaped tip that lets you reach deep into the battery racks to completely probe the terminals.Resistance measurement range

Reviews

There are no reviews yet.

Be the first to review “HIOKI BATTERY TESTER BT3554-51”

Your email address will not be published. Required fields are marked *

Quick Comparison

SettingsHIOKI BATTERY TESTER BT3554-51 removeMECO BM 63 BATTERY TESTER removeMECO VBSM6246P VEHICLE BATTERY SYSTEM removeMECO DBM 72 DIGITAL BATTERY METER removeMECO VBSM6129B - VEHICLE BATTERY SYSTEM METER removeMECO VBM6246 VEHICLE BATTERY SYSTEM remove
NameHIOKI BATTERY TESTER BT3554-51 removeMECO BM 63 BATTERY TESTER removeMECO VBSM6246P VEHICLE BATTERY SYSTEM removeMECO DBM 72 DIGITAL BATTERY METER removeMECO VBSM6129B - VEHICLE BATTERY SYSTEM METER removeMECO VBM6246 VEHICLE BATTERY SYSTEM remove
Image
SKU
Rating
Price
Stock
Availability
Add to cart

Read more

Read more

Read more

Read more

Read more

Read more

DescriptionSPECIFICATIONS
  • Resistance measurement range : 3 mΩ (max. display 3.100 mΩ, resolution 1 μΩ) to 3 Ω (max. display 3.100 Ω, resolution 1 mΩ), 4 ranges
  • Accuracy : ±0.8 % rdg ±6 dgt (3 mΩ range: ±1.0 % rdg ±8 dgt)
  • Testing source frequency : 1 kHz ±30 Hz
  • Voltage measurement range : ± 6 V (max. display ±6.000 V, resolution: 1 mV) to ± 60 V (max. display ±60.00 V, resolution: 10 mV), 2 ranges
  • Temperature measurement accuracy :  -10°C to 60°C (14°F to 140°F), Maximum display: 60.0°C (140.0°F), Resolution 0.1°C (0.1°F)
  • Absolute max. input voltage : 60 V DC max. (No AC input)
  • Measurement time : 100 ms
  • Response time : Approx. 1.6 sec.
  • Power supply : LR6 (AA) Alkaline dry battery ×8
  • Continuous operating time: About 8.3 hr. (without Z3210 installed), About 8.2 hr. (with Z3210 installed and wireless communications active)
  • Communication interface : USB Bluetooth® wireless communications (when Z3210 installed)
FEATURES
  • Battery measurement can be performed while the battery is connected to its host device, without taking it offline
  • Measure and save data in as fast as 2 seconds, a 60% improvement from the legacy 3554
  • Instantaneously diagnose battery degradation (PASS, WARNING, FAIL) by measuring internal resistance and voltage (*1)
  • Noise reduction technology improves noise resistance
  • Screen and audio (*2) guidance simplifies measurement
  • Measurement data is linked to site information and saved, reducing management man-hours
  • Easily transfer measurement data to your smartphone or tablet by using our free app GENNECT Cross (*3) or to an Excel® file. (Wireless Adapter Z3210 is necessary)
  • New protector delivers better ergonomic hold and durability in the field.
SPECIFICATIONS : 
  • DC VOLTAGE RANGE : 2 to 12 V
  • BATTERY CAPACITY : 4-500 Ah
  • DIMENSIONS : 220x120x70 mm
  • DISPLAY : Analog
FEATURES : 
  • Rated Voltage of Battery to be Tested: 2, 6, 12V DC.
  • Rated Capacity of Battery to be Tested: 4-500 Ah.
  • Measuring Time: <3 Sec.
SPECIFICATIONS : 
  • RATED  CAPACITY : 4 - 400 Ah
  • DIMENSION : 235x90x50 mm
FEATURES : 
  • Key Parameters Measured for Diagnosis of Vehicle Battery & Electrical System
  • Display of Battery Condition [Good / Ok / Pay Attention / Replace]
  • Overload Protection to ensure Operator Safety
  • Loose Lead DetectionReverse Polarity Protectionl
  • Internal Unit Conversion CCA / IEC / EN / DIN
  • Battery Recharge Indicator, Detects and Displays Bad Cell, Overload Protection of Input Voltage
SPECIFICATIONS : 
  • BATTERY VOLTAGE : 6 & 12 V DC
  • DIMENSIONS : 205x115x70 mm
  • CERTIFICATIONS : CAT III 600V
  • RESISTANCE : Internal Battery Load Test & 4 - Wires Test: 0-99 mV
  • BATTERY CAPACITY : 40-200 Ah
FEATURES : 
  • Auto Data Hold.
  • Overload Protection.
  • Missing Lead Detection.
  • Detects & Display Bad Cell.
  • Reverse Polarity Protection.
  • Built-In 10 Seconds Timer to Auto Cut-off Load After Test.
SPECIFICATIONS :  
  • CCA Range: 100 to 1700
  • IEC Range: 100 to 1000
  • EN Range: 100 to 1700
  • DIN Range: 100 to 1000FEATURES :
  • SUITABLE FOR : Battery Test, Engine Activation Load Test & Charging System Test.
SPECIFICATIONS: 
  • BATTERY VOLTAGE : 12 & 24 V
  • DIMENSIONS : 180x90x32 mm
  • RANGE : CCA Range: 100 to 1700 IEC Range: 100 to 1000 EN Range: 100 to 1700 DIN Range: 100 to 1000
FEATURES : 
  • Loose Lead Detection.
  • Reverse Polarity Protection.
  • Overload Protection to ensure Operator Safety.
  • Display of Battery Condition: Good/Ok/Pay Attention/Replace.
 
 
ContentHioki portable battery testers support the maintenance of UPS and storage batteries critical to the life support of all businesses. The BT3554-50 battery internal resistance tester sets the standard for assessing the deterioration and remaining life of UPS and other lead-acid batteries by giving a complete diagnosis via battery resistance testing. The specially designed L2020 Pin Type Lead further improves testing efficiency with an L-shaped tip that lets you reach deep into the battery racks to completely probe the terminals.Resistance measurement rangeThe Meco BM63 Battery Meter is a capacitor tester that is able to measure the battery capacity of 4-500 Ah. It is easy to use and has a large LCD screen for displaying the battery voltage, current and capacity. The Meco Capacitor Tester is an easy-to-use device that aides in the testing of capacitors. The tester is battery powered and has an easy-to-read analog display. It is a must-have for any technician working with capacitors. The tester is reliable and comes with a 1-year warranty. Our capacitor testers are ideal for checking the capacitors in electronic equipment, such as laptops and smartphones. They are small and easy to use, making them great for Investigation, Testing and Examination.We can provide good quality of Meco VMSM6246P Vehicle Battery System MeterAll Meco DBM72 Digital Battery Meter are manufactured by using quality assured material and advanced techniques, which make them up to the standard in this highly challenging field. The materials utilized to manufacture Meco DBM72 Digital Battery Meter, are sourced from the most reliable and official vendors, chosen after performing detailed market surveys. Meco products are widely acknowledged in the market for their high quality. We are dedicatedly involved in providing an excellent quality array of Meco Capacitor Testers .Meco VBSM6129B 12V Vehicle Battery System Meter is a premium quality product from Meco. All Meco VBSM6129B 12V Vehicle Battery System Meter are manufactured by using quality assured material and advanced techniques, which make them up to the standard in this highly challenging field. The materials utilized to manufacture Meco VBSM6129B 12V Vehicle Battery System Meter, are sourced from the most reliable and official vendors, chosen after performing detailed market surveys. Meco products are widely acknowledged in the market for their high quality. We are dedicatedly involved in providing an excellent quality array of Meco Capacitor Testers .The Meco VBSM6246 Digital Battery Tester is a great tool for testing the health of your batteries. It features a large, easy-to-read LCD display and can test both AA and AAA batteries. Meco DC Voltage & Internal Resistance Capacitor Testers are designed for use in testing capacitors for DC voltage and internal resistance. The testers are compact and lightweight, making them easy to use and transport. The testers come with a 1-year warranty and customer care number for any questions or concerns.
Weight
DimensionsN/AN/AN/AN/AN/AN/A
Additional information