| Description | SEPCIFICATIONS :
-
JAW OPENING : 65 x 32 mm
-
RANGE : AUTO
-
BATTERY TYPE : 1.5V (AA) x 4 (Alkaline)
-
DISPLAY : 4 Digit 9999 Counts LCD
-
MEMORY : 99 Sets
-
OVER LOADING INDICATION : OL
-
OPERATING ENVIRONMENT : -10°C ~ 55°C
-
DIMENSIONS : 293 x 90 x 66 mm
-
WEIGHT : 1250gms
-
CONFIGURABLE AlARM : Resistance : 1~199V, Current : 1~499mA
FEATURES :
- Non Contact Ground Resistance Measurement
- No Auxiliary Electrodes Needed
- Data Storing Memory
- Data Hold, Noise Signal
- Ground Resistance Measurement 0.01Ω ~ 1000Ω
- Suitable for Earthing Strip of 65mm x 32mm
- Leakage Current (0.5mA ~ 30.00A) (Model : 4680BLC)
- Auto Ranging
- Continuity Loop Test
- Auto Power Off
| SPECIFICATIONS :
- DIMENSION : 210x62x35.6 mm
- ACCESSORIES : Carrying Case x 1, Users Manual x 1, 1.5 V Battery x 2, Test Leads x 1 pair
- POWER : 10 mA
FEATURES :
- 10µA Ultra High Resolution
- Large Conductor Diameter (30mm)
- AC Current in 5 Ranges (40mA, 400mA, 4A, 40A, 60A)
- Wide Frequency Response (40Hz-1KHz)
- ACA, ACV, Ω and Continuity
- Large 3¾ Digit LCD (4000 Count)
- 40 Segment Fast Bargraph Display (20 times/sec.)
- Data Hold and Max / Min Hold
- Relative Measurement
- 600 Vrms Overload Protection in Resistance Range
| SPECIFICATIONS
- DC VOLTAGE : 600V
- AC VOLTAGE : 600V
- DC CURRENT : 80~100A
- AC CURRENT : 80~100A
- RESISTANCE : 10kΩ
FEATURES
- 4 Digit LCD Display
- 9999 Count
- Sample Rate : 2 times / sec
- Peak Hold
- Low Power Indication
- Auto Power Off (APO)
SPECIAL FUNCTIONS
- Continuity Buzzer <100 Ohm
- MAX Test Voltage 3V DC
- Overall Protection 600V rms
- Standard Accessories : Manual Carrying Case, Test Lead
Dimension : 202(H) x 70(W) x 30(D)mm
- POWER: AAA 1.5V X 2
| SPECIFICATIONS
- AC Current Range : 6.000 mA, 60.00 mA, 600.0 mA, 6.000 A, 60.00 A, 200.0 A, 6 ranges, True RMS
Accuracy : 45 Hz - 400 Hz: ±1.0% rdg ±5 dgt (6.000 mA to 6.000 A), ±1.5% rdg ±5 dgt (60.00 A, 200.0 A)
Accuracy : 15 Hz - 45 Hz, 400 Hz - 2 kHz: ±2.0% rdg ±5 dgt
Defined Accuracy Range : 0.060 mA to 200.0 A
- Frequency range : 15.0 Hz to 2000 Hz
- Crest factor : 3 (other than 200.0 A range), 1.5 (200.0 A range)
- Filter function : Cut off frequency: 180 Hz ±30 Hz at filter ON (-3 dB)
- Harmonic Levels : [With Z3210 installed] Current harmonic levels up to 30th, Content factor, Total harmonic distortion ratio
*Harmonics can be displayed with our free app GENNECT Cross
- Core Jaw Diameter : φ 40 mm (1.57 in.)
- Dimensions : 64 mm (2.52 in) W × 233 mm (9.17 in) H × 37 mm (1.46 in) D
- Mass : 400 g (14.1 oz.)
- Included Accessories : Carrying case C0203 × 1, Instruction manual × 1, Operating Precautions × 1, AA-size alkaline battery (LR6) × 2
FEATURES
- Easily transfer measurement data to your smartphone or tablet by using our free app GENNECT Cross or to an Excel® file. (Wireless Adapter Z3210 is necessary)
- Complies with the performance standard set forth in IEC/EN 61557-13, an international standard on leak clamp meters
- CAT IV 300 V
CAT III 600 V
- Detect minuscule leakage currents with a newly designed sensor. (Core jaw diameter up to φ 40 mm)
- Solve GFCI and RCD problems quickly
- Broad measurement range extending from leakage currents to load currents
- Speed up pass/fail judgments with the built-in comparator function
| Specification
- AC Voltage: 400V
- AC Current: 40mA/400mA/4A/40A/80A/80-100A
- Resistance Range: 40-400 Ohms
- CONTINUITY TEST : Threshold 40Ω, Continuity Beeper 2.5KHz
FEATURES
- 3¾ Digit Manual Range
- 3,999 Count
- 10uA high Resolution
- Auto Power Off (APO)
- Shielded Transformer Jaw Open to 1.2”
- POWER: 9V (6F22) X 1
- Standarrd Accesories :Hard Carrying Case, Test Lead, Manual
- Dimension : 209(H) x 43(W) x 30(D)mm
| SPECIFICATIONS
FEATURES
- High precision AC mA measurement, it is useful for AC mA leakage current measurement.
- Measure AC mA on the inductive conductor.
- Miniature type, easy to carry out & operation.
- High precision for low ACA leakage current measurement.
- Built-in DATA HOLD function.
- Crystal time base, high quality.
- LCD display allows clear readout-out even at high ambient light level.
- LSI circuit provides high reliability and durability.
- Overload protection circuit is provided for all range.
- Design to meet IEC 1010 safety requirement.
- Compact, light weight and excellent operation.
|
| Content | The faults in any Electrical System are unavoidable. Earthing plays an important role in Generation, Transmission & Distribution for safe and proper operation of any Electrical Installation. MECO 4680BL/4680BLC Clamp-On Earth / Ground Resistance Tester has long jaw suitable for Earthing Strip of 65mm x 32mm. It completely eliminates the use of ground and auxiliary rods thus saving lot of time and avoiding shutdown. Calibration check can be verified by using the Resistance Verification Plate provided. This is an extremely handy instrument especially at place where it is next to impossible to measure Earth / Ground Resistance by conventional methods. Substantial time saving and easy operating justify the investment in these instruments. | Meco 4671 has the following features: 10A Ultra High Resolution; Large Conductor Diameter (30mm); AC Current in 5 Ranges (40mA 400mA 4A 40A 60A); Wide Frequency Response (40Hz-1KHz); ACA ACV and Continuity; Large 3 Digit LCD (4000 Count); 40 Segment Fast Bargraph Display (20 times/sec.); Data Hold and Max / Min Hold; Relative Measurement; 600 Vrms Overload Protection in Resistance Range | HTC 4 Digit LCD Display Digital Clamp Meter CL-2055 is a premium quality product from HTC. All HTC 4 Digit LCD Display Digital Clamp Meter CL-2055 are manufactured by using quality assured material and advanced techniques, which make them up to the standard in this highly challenging field. The materials utilized to manufacture HTC 4 Digit LCD Display Digital Clamp Meter CL-2055, are sourced from the most reliable and official vendors, chosen after performing detailed market surveys. HTC products are widely acknowledged in the market for their high quality. We are dedicatedly involved in providing an excellent quality array of HTC Clamp Meters . | | HTC CL-2054 AC Leakage Current Tester is a premium quality product from HTC. All HTC CL-2054 AC Leakage Current Tester are manufactured by using quality assured material and advanced techniques, which make them up to the standard in this highly challenging field. The materials utilized to manufacture HTC CL-2054 AC Leakage Current Tester, are sourced from the most reliable and official vendors, chosen after performing detailed market surveys. HTC products are widely acknowledged in the market for their high quality. We are dedicatedly involved in providing an excellent quality array of HTC Leakage Testers . | Lutron DL-6054 ACA Leakage tester is a high precision AC mA measurement, it is useful for AC mA leakage current measurement. Measure ACMA on the inductive conductor. Measurement range: AC 200mA – 20A – 200.
Applications: Measures Ground fault current, Industrial troubleshooting, general AC load monitor, and medical device safety testing. |
Reviews
There are no reviews yet.