HIOKI CM-4003 AC LEAKAGE CLAMP METER (Output and external power supply function)

Brands:

Availability: In Stock

SPECIFICATIONS 

  • AC Current Range : 6.000 mA, 60.00 mA, 600.0 mA, 6.000 A, 60.00 A, 200.0 A, 6 ranges, True RMS
    Accuracy : 45 Hz – 400 Hz: ±1.0% rdg ±5 dgt (6.000 mA to 6.000 A), ±1.5% rdg ±5 dgt (60.00 A, 200.0 A)
    Accuracy : 15 Hz – 45 Hz, 400 Hz – 2 kHz: ±2.0% rdg ±5 dgt
    Defined Accuracy Range : 0.060 mA to 200.0 A
  • Frequency range : 15.0 Hz to 2000 Hz
  • Crest factor : 3 (other than 200.0 A range), 1.5 (200.0 A range)
  • Filter function : Cut off frequency: 180 Hz ±30 Hz at filter ON (-3 dB)
  • Output Function : RMS (RMS value output), WAVE (waveform output)
  • Harmonic Levels : [With Z3210 installed] Current harmonic levels up to 30th, Content factor, Total harmonic distortion ratio
    *Harmonics can be displayed with our free app GENNECT Cross.
  • Display : Display refresh rate: 5 times/s
  • Core Jaw Diameter : φ 40 mm (1.57 in.)
  • Dimensions : 64 mm (2.52 in) W × 233 mm (9.17 in) H × 37 mm (1.46 in) D
  • Mass : 400 g (14.1 oz.)
  • Included Accessories : Connection Cable L9097 × 1, USB Cable × 1, Carrying case C0203 × 1, Instruction manual × 1, Operating Precautions × 1, AA-size alkaline battery (LR6) × 2

FEATURES

  • Easily transfer measurement data to your smartphone or tablet by using our free app GENNECT Cross or to an Excel® file. (Wireless Adapter Z3210 is necessary)
  • Detect minuscule leakage currents with a newly designed sensor. (Core jaw diameter up to φ 40 mm)
  • Broad measurement range extending from leakage currents to load currents
  • Complies with the performance standard set forth in IEC/EN 61557-13, an international standard on leak clamp meters
  • Solve GFCI and RCD problems quickly
  • Speed up pass/fail judgments with the built-in comparator function
  • Output function (waveform/RMS): use with a recorder to record waveforms and fluctuations
  • External power supply: use an optional AC adapter for continuous, long-term measurement
  • CAT III 300 V

Description

CM4002 AND CM4003

Reviews

There are no reviews yet.

Be the first to review “HIOKI CM-4003 AC LEAKAGE CLAMP METER (Output and external power supply function)”

Your email address will not be published. Required fields are marked *

Quick Comparison

SettingsHIOKI CM-4003 AC LEAKAGE CLAMP METER (Output and external power supply function) removeMECO DT-2250Hz AUTO DIGITAL CLAMPMETER removeMECO 1080 TRMS DIGITAL CLAMPMETER removeBEETECH M-266 DIGITAL CLAMP METER 1000A AC removeMECO 72T AUTO BL CLAMP METER removeMECO-G R2025THz DIGITAL CLAMPMETER remove
NameHIOKI CM-4003 AC LEAKAGE CLAMP METER (Output and external power supply function) removeMECO DT-2250Hz AUTO DIGITAL CLAMPMETER removeMECO 1080 TRMS DIGITAL CLAMPMETER removeBEETECH M-266 DIGITAL CLAMP METER 1000A AC removeMECO 72T AUTO BL CLAMP METER removeMECO-G R2025THz DIGITAL CLAMPMETER remove
Image
SKU
Rating
Price
Stock
Availability
Add to cart

Read more

Read more

Read more

Read more

Read more

Read more

DescriptionSPECIFICATIONS 
  • AC Current Range : 6.000 mA, 60.00 mA, 600.0 mA, 6.000 A, 60.00 A, 200.0 A, 6 ranges, True RMS Accuracy : 45 Hz - 400 Hz: ±1.0% rdg ±5 dgt (6.000 mA to 6.000 A), ±1.5% rdg ±5 dgt (60.00 A, 200.0 A) Accuracy : 15 Hz - 45 Hz, 400 Hz - 2 kHz: ±2.0% rdg ±5 dgt Defined Accuracy Range : 0.060 mA to 200.0 A
  • Frequency range : 15.0 Hz to 2000 Hz
  • Crest factor : 3 (other than 200.0 A range), 1.5 (200.0 A range)
  • Filter function : Cut off frequency: 180 Hz ±30 Hz at filter ON (-3 dB)
  • Output Function : RMS (RMS value output), WAVE (waveform output)
  • Harmonic Levels : [With Z3210 installed] Current harmonic levels up to 30th, Content factor, Total harmonic distortion ratio *Harmonics can be displayed with our free app GENNECT Cross.
  • Display : Display refresh rate: 5 times/s
  • Core Jaw Diameter : φ 40 mm (1.57 in.)
  • Dimensions : 64 mm (2.52 in) W × 233 mm (9.17 in) H × 37 mm (1.46 in) D
  • Mass : 400 g (14.1 oz.)
  • Included Accessories : Connection Cable L9097 × 1, USB Cable × 1, Carrying case C0203 × 1, Instruction manual × 1, Operating Precautions × 1, AA-size alkaline battery (LR6) × 2
FEATURES
  • Easily transfer measurement data to your smartphone or tablet by using our free app GENNECT Cross or to an Excel® file. (Wireless Adapter Z3210 is necessary)
  • Detect minuscule leakage currents with a newly designed sensor. (Core jaw diameter up to φ 40 mm)
  • Broad measurement range extending from leakage currents to load currents
  • Complies with the performance standard set forth in IEC/EN 61557-13, an international standard on leak clamp meters
  • Solve GFCI and RCD problems quickly
  • Speed up pass/fail judgments with the built-in comparator function
  • Output function (waveform/RMS): use with a recorder to record waveforms and fluctuations
  • External power supply: use an optional AC adapter for continuous, long-term measurement
  • CAT III 300 V
SPECIFICATIONS : 
  • DC VOLTAGE RANGE : 4-1000 V (Auto Ranging)
  • AC VOLTAGE RANGE : 4 to 750V (Auto Ranging)
  • AC VOLTAGE : 4V, 40V, 400V, 750V (Auto) (40-500Hz)
  • DC VOLTAGE : 4V, 40V, 400V, 1000V (auto)
  • FREQUENCY  RANGE : 10 Hz, 50 Hz & 500 Hz
  • FREQUENCY ACCURACY : ±(0.5% rdg + 2 dgt)
  • RESISTANCE : 400Ω, 4KΩ, 40KΩ, 400KΩ, 4MΩ, 40MΩ (Auto)
  • DIMENSION : 250x98x35 mm
FEATURES : 
  • Automatic.
  • 3 V Sensitivity.
  • Select Button.
  • Data Hold Button.
  • Audible Continuity Check.
  • Diode Test Functions.
  • Low Battery Indications.
  • Over Volt Protections 200V DC and AC Peak.
  • Automatic, Positive Implied, Negative Polarity Indication.
SPEIFICATIONS : 
  • DC VOLTAGE RANGE : 600 mV-1000 V
  • AC VOLTAGE RANGE : 600 mV-750 V
  • DC ACCURACY : ±(0.5 % + 3 Digits)
  • AC ACCURACY : ±(0.8 % + 5 Digits)
  • AC CURRENT : Above 1000 A
  • DC CURRENT : 600 µA-1200 A
  • DISPLAY : 3⅚ Digits LCD Display
  • FREQUENCY : 99.99 Hz-20 MHz
  • TEMPERATURE : -20° to 1000°C
  • RESISTANCE : 0-60 MΩ
  • DIMENSIONS : 238x90x48 mm
FEATURES : 
  • True Rms.
  • 6000 Counts Lcd Display with Backlight.
  • Low Battery Indications.
  • Continuity Buzzer.
  • Diode Checking & Temperature.
SPECIFICATION
  • AC current : 1000A
  • AC Voltage : 750V
  • DC Voltage : 1000V
  • Resistance : 20KΩ
  • Insulation test : 2000MΩ
  • Audible continuity : Overload Protection 15s maximum 250Vrms
FEATURES
  •  Display Mode: 3 1/2 LCD
  •  Maximum Display: 1999, 0.5” high
  •  Maximum Span of Jaw: 53mm
  •  Auto Polarity Indication: Displaying “-”, assumed “+”
  •  Sampling speed: 2 times/s
  •  Over-load indication: “1” is displayed
  •  Low battery indication
  •  Power supply: 9V
  •  Dimensions: 230 x 68 x 37mm
  •  Weight: ≈ 240g (battery included)
  •  Static electricity: ≈ 4mA
  •  Operating environment: 0˚C ~ 40˚C, at <80% RH
  •  Storage environment: -10 ˚C ~ 50˚C at <85% RH
SPECIFICATIONS : 
  • DC VOLTAGE : 400 mV-600 V
  • AC VOLTAGE : 0-600 V
  • AC CURRENT : ?(2.5 % + 5 Digits)
  • DC CURRENT : ?(0.8 % + 3 Digits)
  • DC ACCURACY : ?(0.8 % + 3 Digits)
  • AC ACCURACY : ?(1.2 % + 3 Digits)
FEATURES : 
  • Auto Power off.
  • Data Hold Function.
  • Audible Continuity Test.
  • Diode Test Functions.
  • Low Battery Indications.
  • Function Button, Hold Button & Rel Button.
SPECIFICATIONS :
  • DC VOLTAGE : 1000V
  • AC VOLTAGE : 750V
  • ACCURRENT : 1000V
  • RESISTANCE : 60M ohms
  • TEMPERATURE : -40~2000℉
FEATURES : 
  • TRANSFORMER JAWS
  • TRIGGER
  • Hz/DUTY BUTTON
  • RANGE BUTTON
  • 3 5/6 DIGIT LCD DISPLAY
  • "V" INPUT TERMINAL
  • "COM" TERMINAL
  • SELECT BUTTON
  • FUNCTION SWITCH /RANGE SWITCH
  • D. HOLD BUTTON
ContentCM4002 AND CM4003Meco Digital Clamp Meter 2250-HZ comes with an assortment of features like data hold diode test data hold and % duty cycle. It is equipped with 2250-Hz Auto 10000A AC 3 digit 3999 counts APO frequency and data hold.The Meco 1080 TRMS Digital AC/DC Clamp Meter True RMS 1200 A 750 V is a great tool for electricians and contractors. It is a true RMS meter, meaning it measures the actual voltage and current, making it the only choice for measuring AC and DC signals. The Meco 1080-TRMS digital AC/DC clamp meter is a must-have for any electrician or technician. This ergonomic and lightweight meter is easy to use, with a large, backlit LCD display for clear readings. The meter has a wide range of capabilities, including measuring AC and DC voltage, AC and DC current, and resistance. With accuracy of (0.5 % + 3 Digits), the Meco 1080-TRMS is a reliable tool for any electrical job. The SENSO-30 clamp meter is a versatile tool for quickly and accurately measuring the terminal dimensions of cables and wires. The jaws are open 30 mm, which makes it easy to get a close reading on wires and cables.BEETECH M266 Digital AC Clamp Meter is a versatile and easy-to-use clamp meter that can measure AC current, AC/DC voltage, resistance, and continuity. It is perfect for use in a variety of applications, including electrical maintenance, HVAC/R, automotive, and more. The clamp meter is a precision instrument that is perfect for a wide range of applications. It is affordably priced and has exceptional quality. This clamp meter is easy to use and has a wide variety of features that make it perfect for any measuring need.
All Meco 72T-Auto Digital AC Clamp Meter 400 A 600 V are manufactured by using quality assured material and advanced techniques, which make them up to the standard in this highly challenging field. The materials utilized to manufacture Meco 72T-Auto Digital AC Clamp Meter 400 A 600 V, are sourced from the most reliable and official vendors, chosen after performing detailed market surveys. Meco products are widely acknowledged in the market for their high quality. We are dedicatedly involved in providing an excellent quality array of Meco Clamp Meters .
The MECO-G 1000A AC Digital Auto Ranging Clamp Meter is a great choice for those who need a reliable and accurate clamp meter. It features a large jaw opening for easy clamping, auto ranging for easy use, and a backlit LCD display for easy reading. The MECO-G clamp meter is a great choice for measuring dc voltage and current, as well as ac current. It has a range of 600mV to 6V, 60V to 600V, and 1000V, making it suitable for a variety of applications. The ac current range is 60A to 600A, and 1000A, with an accuracy of  (2.5% of reading + 10 digits). The clamp meter also features a resistance accuracy of  (1.5% of reading + 5 digits).
Weight
DimensionsN/AN/AN/AN/AN/AN/A
Additional information