Fluke 376 True RMS AC/DC Clamp Meter with iFlex®

Brands: FLUKE

Category: CLAMPMETER

Availability: In Stock

SPECIFICATIONS

AC Current via Jaw
Range : 999.9A
Resolution : 0.1A
Accuracy : 2% ± 5 digits (10-100 Hz) ; 2.5% ± 5 digits (100-500 Hz)
AC Current via Flexible Current Probe
Range : 2500A
Resolution : 0.1 A (≤ 999.9 A) ; 1 A (≤ 2500 A)
Accuracy : 3% ±5 digits (5 – 500 Hz)
DC Current
Range : 999.9A
Resolution : 0.1 A
Accuracy : 2% ±5 digits
AC Voltage
Range : 1000V
Resolution : 0.1 V (≤ 600.0 V) ; 1 V (≤ 1000 V)
Accuracy : 1.5% ± 5 digits (20 – 500 Hz)
DC Voltage
Range : 1000V
Resolution : 0.1 V (≤ 600.0 V) ; 1 V (≤ 1000 V)
Accuracy : 1% ±5 digits
Frequency Via Jaw
Range : 5.0 – 500.0 Hz
Resolution : 0.1 Hz
Accuracy : 0.5% ± 5 digits
Frequency via Flexible Current Probe
Range : 5.0 – 500.0 Hz
Resolution : 0.1 Hz
Accuracy : 0.5% ± 5 digits
Resistance
Range : 60 kΩ
Resolution : 0.1 Ω (≤ 600 Ω) ; 1 Ω (≤ 6000 Ω) ; 10 Ω (≤ 60 kΩ)
Accuracy : 1% ± 5 digits
Capacitance
Range : 1000 μF
Resolution : 0.1 μF (≤ 100 μF) ; 1 μ F (≤ 1000 μF)
Accuracy : 1% ± 4 digits
Jaw Opening : 34mm
Flexible Current Probe Diameter : 7.5mm
Flexible Current Probe Cable Length (head to electronics connector) : 1.8M
Operating Temperature : 14°F to 122°F (-10 °C to 50 °C)
Storage Temperature : -40 °F to 140 °F (-40 °C to 60 °C)
Size : 246 mm x 83 m x 43 mm
Weight : 388g

FEATURES

iFlex^® Flexible Current Probe expands the measurement range to 2500 A AC
CAT IV 600 V, CAT III 1000 V
True RMS AC voltage and current for accurate measurements on non-linear signals
Min, max, average and Inrush recording to capture variations automatically
Integrated low pass filter and state-of-the-art signal processing allows for use in noisy electrical environments while providing stable readings
Proprietary Inrush measurement technology to filter out noise and capture motor starting current exactly as the circuit protection sees it
Ergonomic design fits in your hand and can be used while wearing protective equipment
Large, easy to read backlight display automatically sets the correct measurement range so you do not need to change the switch positions while taking a measurement
Three-year warranty
Soft Carrying Case

Category: CLAMPMETER

Description
Reviews (0)

Description

You can measure around awkward sized conductors with the Fluke 376 True RMS Clamp Meter with iFlex^®, expanding your measurement range to 2500 A AC. With True RMS voltage and current measurements, the Fluke 376 can read up to 1000 V and 1000 A in both AC and DC modes.

The Fluke 376 is the direct replacement for the Fluke 337 Clamp Meter.

Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “Fluke 376 True RMS AC/DC Clamp Meter with iFlex®”

Quick Comparison

Settings	Fluke 376 True RMS AC/DC Clamp Meter with iFlex® remove	MECO 2502T AUTO BL CLAMPMETER remove	MECO 27T AUTO BL 3 1/2 DIGITS AUTO RANGING DIGITAL CLAMP METER remove	MECO 3690 AUTO DIGITAL CLAMPMETER remove	MECO-G R-2070C DIGITAL CLAMPMETER remove	HTC CM 2000 - 600A AC Clamp Meter remove
Name	Fluke 376 True RMS AC/DC Clamp Meter with iFlex® remove	MECO 2502T AUTO BL CLAMPMETER remove	MECO 27T AUTO BL 3 1/2 DIGITS AUTO RANGING DIGITAL CLAMP METER remove	MECO 3690 AUTO DIGITAL CLAMPMETER remove	MECO-G R-2070C DIGITAL CLAMPMETER remove	HTC CM 2000 - 600A AC Clamp Meter remove
Image
SKU
Rating
Price
Stock
Availability
Add to cart	Read more	Read more	Read more	Read more	Read more	Read more
Description	SPECIFICATIONS AC Current via Jaw Range : 999.9A Resolution : 0.1A Accuracy : 2% ± 5 digits (10-100 Hz) ; 2.5% ± 5 digits (100-500 Hz) AC Current via Flexible Current Probe Range : 2500A Resolution : 0.1 A (≤ 999.9 A) ; 1 A (≤ 2500 A) Accuracy : 3% ±5 digits (5 – 500 Hz) DC Current Range : 999.9A Resolution : 0.1 A Accuracy : 2% ±5 digits AC Voltage Range : 1000V Resolution : 0.1 V (≤ 600.0 V) ; 1 V (≤ 1000 V) Accuracy : 1.5% ± 5 digits (20 – 500 Hz) DC Voltage Range : 1000V Resolution : 0.1 V (≤ 600.0 V) ; 1 V (≤ 1000 V) Accuracy : 1% ±5 digits Frequency Via Jaw Range : 5.0 - 500.0 Hz Resolution : 0.1 Hz Accuracy : 0.5% ± 5 digits Frequency via Flexible Current Probe Range : 5.0 - 500.0 Hz Resolution : 0.1 Hz Accuracy : 0.5% ± 5 digits Resistance Range : 60 kΩ Resolution : 0.1 Ω (≤ 600 Ω) ; 1 Ω (≤ 6000 Ω) ; 10 Ω (≤ 60 kΩ) Accuracy : 1% ± 5 digits Capacitance Range : 1000 μF Resolution : 0.1 μF (≤ 100 μF) ; 1 μ F (≤ 1000 μF) Accuracy : 1% ± 4 digits Jaw Opening : 34mm Flexible Current Probe Diameter : 7.5mm Flexible Current Probe Cable Length (head to electronics connector) : 1.8M Operating Temperature : 14°F to 122°F (-10 °C to 50 °C) Storage Temperature : -40 °F to 140 °F (-40 °C to 60 °C) Size : 246 mm x 83 m x 43 mm Weight : 388g FEATURES iFlex^® Flexible Current Probe expands the measurement range to 2500 A AC CAT IV 600 V, CAT III 1000 V True RMS AC voltage and current for accurate measurements on non-linear signals Min, max, average and Inrush recording to capture variations automatically Integrated low pass filter and state-of-the-art signal processing allows for use in noisy electrical environments while providing stable readings Proprietary Inrush measurement technology to filter out noise and capture motor starting current exactly as the circuit protection sees it Ergonomic design fits in your hand and can be used while wearing protective equipment Large, easy to read backlight display automatically sets the correct measurement range so you do not need to change the switch positions while taking a measurement Three-year warranty Soft Carrying Case	SPECIFICATIONS : DC VOLTAGE : 200mV, 2V, 20V, 200V, 1000V AC VOLTAGE : 2V, 20V, 200V, 750V AC CURRENT : 2A, 20A, 200A, 1000A TEMPERATURE : -20 to 750 deg C JAW OPENING : 52mm (max.) RESISTANCE : 200Ω, 2kΩ, 20ΩK, 200kΩ, 2MΩ, 20MΩ FEATURES : Auto/Manual Ranging. Temperature, Data Hold. Max, NCV, APO.		SPECIFICATIONS : AC CURRENT : 400A, 600A DC CURRENT : 400A, 600A AC VOLTAGE : 4V, 40V, 400V, 600V DC VOLTAGE : 400mV, 4V, 40V, 400V, 600V DISPLAY : 3¾ Digit LCD Display CAPACITANCE : 40nF, 400nF, 4µF, 40 & 200µF FREQUENCY : 100Hz, 1KHz, 10KHz, 100KHz, 500KHz RESISTANCE : 400Ω, 4KΩ, 40KΩ, 400KΩ, 4MΩ, 40MΩ DIMENSION : 220x85x46 mm FEATURES : Select Button. Data Hold Button. Low Battery Indications Automatic, Positive Implied, Negative Polarity Indication.	SPECIFICATIONS : AC CURRENT : 600A AC VOLTAGE : 600A DIODE RANGE : 1mV FREQUENCY : 50Hz~400Hz DIMENSION : 185mmx51mmx25mm RESISTANCE : 60M ohms CAPACITANCE : 1000μF FEATURES: Op. Current <2mA (no back light). LCD Display, Auto / Manual Ranging, Data Hold. NCV APO, Temperature, Frequency, Max Hold. Diode Test, Resistance, Duty Cycle. Continuity Buzzer, Backlight, Trms. Low Battery Indicated.	SPECIFICATION: DC VOLTAGE : 600V AC VOLTAGE : 600V AC CURRENT : 600A RESISTANCE : 20 M ohms TEMPERATURE : Range (-40~750)°C Resolution 1°C Accuracy - <400°C±1.0% of rdg + 5 digits ≥400°C±1.5% of rdg + 15 digits FEATURES: 3½ Digit 2000 Count Non Contact Voltage (NCV) Clamp Torch Jaw Open: 28mm Auto Power Off (APO) True RMS
Content	You can measure around awkward sized conductors with the Fluke 376 True RMS Clamp Meter with iFlex^®, expanding your measurement range to 2500 A AC. With True RMS voltage and current measurements, the Fluke 376 can read up to 1000 V and 1000 A in both AC and DC modes. The Fluke 376 is the direct replacement for the Fluke 337 Clamp Meter.	Meco 2502T-AUTO AC Digital Clamp Meter is a great product for those who are looking for a reliable and accurate clamp meter. It is easy to use and has a large LCD display that makes it easy to read. The Meco clamp meter is best for those looking for a reasonably priced, long lasting measurement and testing device. This product is known for its quality and durability, making it a great choice for anyone in the market for a reliable clamp meter.	The Meco 27T-Auto digital AC clamp meter is a great tool for measuring current, voltage and resistance. With a 400 A and 600 V rating, this meter is the only choice for a wide range of applications. This digital AC clamp meter is a must-have for any electrician. With a jaw opening size of 25 mm, it can easily clamp onto most wires. The LCD display is easy to read, and the meter is lightweight and easy to carry. It has a dc voltage accuracy of ?(0.8 % + 3 Digits), an ac voltage accuracy of ?(1.2 % + 3 Digits), an ac current range of 0-400 A, and a resistance range of 0-20 M?. Searching for a reliable clamp meter that is simple to use? Look no further than the Meco 27T-Auto clamp meter! This meter is the only choice for anyone who wants an easy-to-use meter that helps them measure and test things easily.	Meco 3690 Auto Digital Clamp Meter is a great product for those who are looking for an easy and accurate way to measure AC/DC voltage, AC current, and resistance. This clamp meter features a large LCD display that makes it easy to read, and a built-in LED light that illuminates the work area. Meco has been committed to providing high quality, stable and long-lived products to our customers. The Meco Clamp Meter is no exception. It is a 3 digit LCD display, AC voltage and current accuracy of 1.2% and 1.75% respectively. The life of the product is reasonable and the performance is stable. Looking for a reliable and affordable clamp meter? Look no further than our very own! This product is perfect for those in the market for a quality assured measurement and testing device that won't break the bank.	The MECO-G TRMS Clamp Meter is a versatile tool for measuring clamping forces in a variety of applications. With its easy-to-read LCD display, the meter is perfect for use in the laboratory, factory, or field. The Meco-G 35/6 digit 6600 counts LCD Display clamp meter is an accurate and versatile instrument for measuring AC currents and voltages. With six ranges and an ac voltage accuracy of 1.5%+5 digits, this meter can measure currents up to 600A and voltages up to 600V. The dc voltage range can measure currents up to 6V and voltages up to 60V. The Picking Technologies Gauge Clamp Meter is an essential tool for testing and measuring the clamping force of any material.	HTC Brand best quality Digital 3 ½ digits 600A clamp tester model CM-2000 having AC Voltage from 200mV to 600V, DC Voltage from 200mV to 600v (auto ranging), Ac current in four ranges (0-2-20-200-600A), Resistance (auto ranging) from 0- 20 M.Ohms, with NCV test, Diode test, sound buzzer in continuity, data hold, clamp led light. Instrument is supplied with carrying case, test probes, installed 1.5v cells and instruction manual.
Weight
Dimensions	N/A	N/A	N/A	N/A	N/A	N/A
Additional information