Description | SPECIFICATIONS
- DC Voltage : 1000V
- AC Voltage : 750V
- DCA : 20A
- ACA : 20A
- Capacitance : 200uF
- Resistance : 2000MΩ
- Frequency: 200kHz
- Temperature : -20°C to 1000°C
FEATURES
- Display Mode: 31/2 LCD display
- Maximum Display: 1999, updates every 2-3s
- Measuring method: Dual – slope integration A/D converter
- AC & DC Voltage
- AC & DC Current
- Capacitance
- Resistance
- Frequency
- Temperature
- Over range display: “1” displayed
- Low battery indication:
- Polarity indication: “-” displayed for negative polarity
- Display Mode: 31/2 LCD display
- Maximum Display: 1999, updates every 2-3s
- Measuring method: Dual – slope integration A/D converter
- AC & DC Voltage
- AC & DC Current
- Capacitance
- Resistance
- Frequency
- Temperature
- Over range display: “1” displayed
- Low battery indication:
- Polarity indication: “-” displayed for negative polarity
- Power supply: 9V
- Dimensions: 189(L) x 91(W) x 31.5mm(H)
- Weight: ≈ 280g (battery included)
- Operating environment: 0˚C ~ 40˚C
- Storage environment: -10˚C ~ 50˚C
- Accuracies are guaranteed for 1 year, 18˚C - 28 ˚C , less than 80% RH
- Fuse protection: F 500mA/250V
- Maximum voltage between terminals and earth ground: 1000VDC or 700VAC
| SPECIFICATIONS :
- AC VOLTAGE : 60 to 600mV, 6 to 750 V
- DC VOLTAGE : 600 mV6/60/600/1000 V
- AC CURRENT : 600, 6000A, 60, 600mA, 6 & 20 Amp
- DC CURRENT : 600Amp, 6000Amp, 60mA, 600mA, 6 & 20 Amp
- SENSITIVITY : 1 to 36 V AC
- RESISTANCE : 600/6/60/600 K6/60 M
- FREQUENCY : 99.99Hz to 10 MHz
FEATURES :
- Has Trms Sensor Type.
- Easy to Carry.
- Auto Power Off.
- Audible Continuity.
- Lcd with Backlight.
- Diode Test, Audible Continuity, Data Hold.
- It can Measure High Voltage.
- The Upper Limit of the Frequency if 20 MHz.
| SPECIFICATIONS :
- DC VOLTAGE : 999.9V
- AC VOLTAGE : 750.0V
- DC CURRENT : 9.999A
- AC CURRENT : 9.999A
- RESISTANCE : 9.999MΩ
- CAPACITANCE : 9.999mF
- FREQUENCY : 9.999MHz
- DUTY CYCLE : 1% ~ 99%
FEATURES :
- LCD with Backlight
- Auto Power Off
- Low Battery Indication
| SPECIFICATIONS
- DC VOLTAGE : 600V
- AC VOLTAGE : 600V
- DC CURRENT : 10A
- RESISTANCE : 200MΩTRANSISTOR hFE TEST (0-1000) : NPN & PNP
FEATURES
- 3½ Digit Manual Multimeter with Backlight
- 1,999 Count
- Data Hold
- True RMS
- NCV
- hFE Test
- Overload Protection
- Low Battery Indication
- CAT II 600V
- Power AAA 1.5V x 2
| SPECIFICATIONS :
- AC CURRENT : 200µA / 2mA / 20mA / 200mA / 20A (50-500Hz)
- DC CURRENT : 200µA / 2mA / 20mA / 200mA / 20A
- AC VOLTAGE : 200mV / 2 / 20 / 200 / 750V
- DC VOLTAGE : 200mV / 2 / 20 / 200 / 1000V
- RESISTANCE : 200Ω / 2kΩ / 20kΩ / 200kΩ / 2000kΩ / 20MΩ / 200MΩ
FEATURES :
- Auto Power Off.
- Overload Protection & Multiple Test Facility.
- Rugged & Durable Design.
| SPECIFICATIONS
- DC Voltage : 600V
- AC Voltage : 600V
- DCA : 10A
- Resistance : 2MΩ
- Transistor hFE test : Vce = 3V
FEATURES
- Display Mode: 3 ½ digit, 7 segment LCD display
- Maximum Display: 1999
- AC & DC Voltage
- DC Current
- Resistance
- Temperature
- Transistor Hfe Test
- Diode & Continuity Test
- Polarity indication: “-” displayed for negative polarity
- Low battery indication:
- Over range indication: “1” displayed
- Auto Power Off
- Back light optional
- Power supply: 9V NEDA 1604 or 6F22 battery
- Dimensions: 138(L) x 69(W) x 31mm(H)
- Weight: ≈ 170g (battery included)
- Operating environment: 0˚C ~ 40˚C, at <80% RH
- Accuracies are guaranteed for 1 year, 18˚C to 28˚C , less than 80% RH
|
Content | The meter is a hand held 3 ½ digital multimeter for measuring DC and AC voltage, DC and AC current, resistance, diode, transistor, frequency, temperature, capacitance and continuity test with battery operated. The back light of display is optional. This multimeter is designed according to IEC – 1010 concerning electronic measuring instruments with an overvoltage category (CATII) and pollution 2. | The Meco Autoranging Digital Multimeter is a top-of-the-line device that is best for electricians, technicians, and engineers. It offers a wide range of features, including autoranging, data hold, and a large LCD screen. The Meco MT6000 digital multimeter is a handheld device that is used to measure voltage, current, and resistance. It has a 3 digit LCD display and dimensions of 180x90x52 mm. The device can measure voltages from 60 to 1000 V, currents from 6 to 6000 mA, and resistances from 600 to 60000 ohms. With practical features like a backlight and multiple measurement ranges, this meter is best for use in a variety of applications. | | HTC DM-830L+ Digital Manual Multimeter with Backlight AC/DC Ammeter Ohm Volt Tester is a reliable and easy-to-use digital multimeter. It is perfect for measuring AC/DC voltage, current, and resistance. HTC-830L+ Digital Multimeter is a great device that can help you test and measure various electrical properties. This digital multimeter is especially useful for measuring DC voltage and current, AC voltage and current, and resistance. Additionally, the device is also useful for continuity testing and diode testing. The digital multimeter has a large LCD screen that makes it easy to read the measurements. The digital multimeter also has a backlight that makes it easy to use in low light conditions. The digital multimeter is powered by a 9V battery. The PowerTech PT-1285 is a Multimeter that is 140x72x30 mm and weighs 0.31 kg.
| Equipped with 3 digits 1999 count LCD display, Meco Digital Multimeter, 603 is well-known in the market for its superior quality and great performance. The size of its display screen is 17 mm with audible continuity. It comes with a diode test and HFE test. This multimeter has an AC voltage of 200mV / 2 / 20 / 200 / 750V and DC current of 200 A / 2mA / 20mA / 200mA / 20A. With a resistance of 200 / 2k / 20k / 200k / 2000k / 200 / 200M, this device is applicable in various fields including physics, electronics, and many others. Suitable for residential, commercial, and industrial sectors, this device is sourced from the well-known brand Meco which manufactures all its products with premium quality raw materials, advanced techniques, and utmost precision. It comes with a warranty period of 1 year. Widely acknowledged in the market for higher accuracy, reliability, efficient functionality, compact design, lightweight, user-friendliness, and longer life, this device comes in various specifications as per the needs of the customers. | The instrument of this series is a small hand-held 3 ½ digital multimeter featuring stable, highly reliable and anti-drop performance. It is provided with a LCD display of 15mm height for clear reading. The circuit design takes LSI double integral A/D converter as its core under the protection of an overload protection circuit, making it a superior and handy instrument. It can be used to measure DC and AC voltage, DC current, resistance, diodes, transistors, temperature and for in-circuit continuity test. |
Reviews
There are no reviews yet.