HIOKI DT-4256 Digital Multimeter

Brands:
Category:

Availability: In Stock

SPECIFICATIONS

  • DC Voltage range : 600.0 mV to 1000 V , 5 ranges
    Accuracy : ±0.3 % rdg. ±3 dgt.
  • AC Voltage range : 6.000 V to 1000 V, 4 ranges, Frequency characteristics: 40 Hz – 1 kHz
    Accuracy : 40 – 500 Hz : ±0.9 % rdg. ±3 dgt. (True RMS, crest factor 3)
  • DC Current range : 60.00 mA to 10.00 A, 4 ranges,
    Accuracy : ±0.9 % rdg. ±3 dgt.
  • AC Current range : 600.0 mA to 10.00 A, 3 ranges,
    Accuracy : 40 – 500 Hz : ±1.4 % rdg. ±3 dgt. (True RMS, crest factor 3, 40 Hz to 1 kHz)
  • Resistance range : 600.0 Ω to 60.00 MΩ, 6 ranges,
    Basic accuracy: ±0.7 % rdg. ±3 dgt.
  • AC Current Range ( use with Clamp on probes ) : 10.00 A to 1000 A, 7 ranges, Add the Clamp on probe accuracy to basic accuracy 40 – 1 kHz : ±0.9 % rdg. ±3 dgt. (True RMS, crest factor 3)
  • Voltage Detection : Hi: AC40 V to 600 V, Lo: AC80 V to 600 V
  • Frequency Range : 99.99 Hz (5 Hz or more) to 99.99 kHz, 4 ranges (limited by the minimum detectable voltage and current)
    Accuracy : ±0.1 % rdg. ±1 dgt
  • Capacitance Range : 1.000 μF to 10.00 mF, 5 ranges
    Accuracy : ±1.9 % rdg. ±5 dgt.
  • Continuity check : Continuity threshold [ON]: 25 Ω or less , [OFF]: 245 Ω or more, Response time: 0.5 ms or more
  • Diode Test : Open terminal voltage: 5.0 V or less, Testing current 0.5 mA or less, Threshold of forward voltage: 0.15 V to 1.5 V
  • Other Functions : Filter function, display value hold, auto hold, MAX/MIN/Average value display, relative value display, auto-power save, USB communication (option)
  • Display : Main and sub displays: 4-digits LCD, max. 6000 digits, bar graph
  • Display Refresh Rate : 5 times/s (Capacitance measurement: 0.05 to 5 times/s, depending on measured value, Frequency: 1 to 2 time/s, Temperature: 1 time/s )
  • Dimensions : 84 mm (3.31 in)W × 174 mm (6.85 in)H× 52 mm (2.05 in)D
  • Mass : 390 g (13.8 oz) (including batteries and holster)
  • Including Accessories : Test lead L9207-10 ×1, Holster ×1, Instruction manual ×1, LR03 alkaline battery ×4

FEATURES

  • ±0.3% DC V basic accuracy, wide 40 Hz to 1 kHz AC V frequency characteristics
  • Low-pass filter cuts high harmonics (when measuring inverter fundamental waveforms)
  • USB communications function supports PC measurements (optional)
  • Broad -25°C to 65°C (-13°F to 149°F) operating temperature range
  • Dual display lets you check voltage and frequency simultaneously
  • Measure up to 10 A with direct input
Category:

Description

The DT-4200 Hioki Digital Multimeter Series consist of a complete lineup of 9 models ranging from professional to industrial to pocket meters, delivering a super fast response rate and safety features that take electrical testing to a higher level. The DT4256 is a digital multimeter designed to deliver maximum functionality for use in a wide range of settings.

CAT IV 600 V, CAT III 1000 V

Reviews

There are no reviews yet.

Be the first to review “HIOKI DT-4256 Digital Multimeter”

Your email address will not be published. Required fields are marked *

Quick Comparison

SettingsHIOKI DT-4256 Digital Multimeter removeMECO 108B+ TRMS DIGITAL MULTIMETER removeMECO 801 AUTO DIGITAL MULTIMETER removeHTC DM 98 - 3 5/6 DIGITAL MULTIMETER removeBEETECH MAS 830-L 600V AC/DC DIGITAL MULTIMETER removeHTC DM-86 DIGITAL MULTIMETER remove
NameHIOKI DT-4256 Digital Multimeter removeMECO 108B+ TRMS DIGITAL MULTIMETER removeMECO 801 AUTO DIGITAL MULTIMETER removeHTC DM 98 - 3 5/6 DIGITAL MULTIMETER removeBEETECH MAS 830-L 600V AC/DC DIGITAL MULTIMETER removeHTC DM-86 DIGITAL MULTIMETER remove
Image
SKU
Rating
Price
Stock
Availability
Add to cart

Read more

Read more

Read more

Read more

Read more

Read more

DescriptionSPECIFICATIONS
  • DC Voltage range : 600.0 mV to 1000 V , 5 ranges Accuracy : ±0.3 % rdg. ±3 dgt.
  • AC Voltage range : 6.000 V to 1000 V, 4 ranges, Frequency characteristics: 40 Hz - 1 kHz Accuracy : 40 - 500 Hz : ±0.9 % rdg. ±3 dgt. (True RMS, crest factor 3)
  • DC Current range : 60.00 mA to 10.00 A, 4 ranges, Accuracy : ±0.9 % rdg. ±3 dgt.
  • AC Current range : 600.0 mA to 10.00 A, 3 ranges, Accuracy : 40 - 500 Hz : ±1.4 % rdg. ±3 dgt. (True RMS, crest factor 3, 40 Hz to 1 kHz)
  • Resistance range : 600.0 Ω to 60.00 MΩ, 6 ranges, Basic accuracy: ±0.7 % rdg. ±3 dgt.
  • AC Current Range ( use with Clamp on probes ) : 10.00 A to 1000 A, 7 ranges, Add the Clamp on probe accuracy to basic accuracy 40 - 1 kHz : ±0.9 % rdg. ±3 dgt. (True RMS, crest factor 3)
  • Voltage Detection : Hi: AC40 V to 600 V, Lo: AC80 V to 600 V
  • Frequency Range : 99.99 Hz (5 Hz or more) to 99.99 kHz, 4 ranges (limited by the minimum detectable voltage and current) Accuracy : ±0.1 % rdg. ±1 dgt
  • Capacitance Range : 1.000 μF to 10.00 mF, 5 ranges Accuracy : ±1.9 % rdg. ±5 dgt.
  • Continuity check : Continuity threshold [ON]: 25 Ω or less , [OFF]: 245 Ω or more, Response time: 0.5 ms or more
  • Diode Test : Open terminal voltage: 5.0 V or less, Testing current 0.5 mA or less, Threshold of forward voltage: 0.15 V to 1.5 V
  • Other Functions : Filter function, display value hold, auto hold, MAX/MIN/Average value display, relative value display, auto-power save, USB communication (option)
  • Display : Main and sub displays: 4-digits LCD, max. 6000 digits, bar graph
  • Display Refresh Rate : 5 times/s (Capacitance measurement: 0.05 to 5 times/s, depending on measured value, Frequency: 1 to 2 time/s, Temperature: 1 time/s )
  • Dimensions : 84 mm (3.31 in)W × 174 mm (6.85 in)H× 52 mm (2.05 in)D
  • Mass : 390 g (13.8 oz) (including batteries and holster)
  • Including Accessories : Test lead L9207-10 ×1, Holster ×1, Instruction manual ×1, LR03 alkaline battery ×4
FEATURES
  • ±0.3% DC V basic accuracy, wide 40 Hz to 1 kHz AC V frequency characteristics
  • Low-pass filter cuts high harmonics (when measuring inverter fundamental waveforms)
  • USB communications function supports PC measurements (optional)
  • Broad -25°C to 65°C (-13°F to 149°F) operating temperature range
  • Dual display lets you check voltage and frequency simultaneously
  • Measure up to 10 A with direct input
SPECIFICATIONS
  • DC VOLTAGE : 60mV-1000V
  • AC VOLTAGE : 60mV-1000V
  • AC CURRENT : ±(1.5% rdg + 3 dgt)
  • DC CURRENT : 60mA-10A
  • DC ACCURACY : ±(1% rdg + 10 dgt)
  • AC ACCURACY : ±(3% rdg + 3 dgt)
  • TEMPERATURE : ±(1.5% rdg + 15 dgt)
  • FREQUENCY : ±(0.08% rdg + 2 dgt)
  • RESISTANCE : 600Ω-60MΩ
FEATURES :
  • Low Battery is Indication.
  • Small Lightweight Design for One-Handed Use.
  • Pocket Size, Back Light Display, Diode & Continuity Test with Buzzer.
SPCIFICATIONS : 
  • AC CURRENT : 400µA / 4000µA / 40mA / 400mA / 4 / 20A
  • DC CURRENT : 400µA / 4000µA / 40mA / 400mA / 4 / 20A
  • DC VOLTAGE : 400mV / 4 / 40 / 400 / 1000V
  • AC VOLTAGE : 4 / 40 / 400 / 750V
  • TEMPERATURE : -20°C ~ 1300°C
  • RESISTANCE : 400Ω / 4kΩ / 40kΩ / 400kΩ / 4MΩ / 40MΩ
  • CAPACITANCE : 40 / 400nF / 4 /40 /100 uF
  • FREQUENCY : 9.999 Hz-9.999 MHz
FEATURES : 
  • Auto / Manual, 3 Digit, 3999 Count LCD, with APO, Capacitance, Frequency, Duty Cycle & Temperature.
  • Diode Test, Audible Continuity, Data Hold.
SPECIFICATIONS
  • DC VOLTAGE : 1000V
  • AC VOLTAGE : 750V
  • DC CURRENT : 10A
  • AC CURRENT : 10A
  • FREQUENCY / DUTY : 10kHz
  • RESISTANCE : 60MΩ
  • CAPACITANCE : 1000µF
  • TEMPERATURE : 752~1832°F
FEATURES
  • 3⅚ Digit
  • 6000 Count
  • Dual LCD with Bargraph
  • Live test (sound and light alarm)
  • NCV
  • True RMS
  • Double color backlight
  • Torch
  • Diode Test
  • Continuity Buzzer
  • Power AA 1.5V X 2
 
SPECIFICATIONS
  • DC Voltage : 600V
  • AC Voltage : 600V
  • DCA : 10A
  • Resistance : 2MΩ
  • Transistor hFE test : Vce = 3V
FEATURES
  •  Display Mode: 3 ½ digit, 7 segment LCD display
  •  Maximum Display: 1999
  •  AC & DC Voltage
  •  DC Current
  •  Resistance
  •  Temperature
  •  Transistor Hfe Test
  •  Diode & Continuity Test
  •  Polarity indication: “-” displayed for negative polarity
  •  Low battery indication:
  •  Over range indication: “1” displayed
  •  Auto Power Off
  •  Back light optional
  •  Power supply: 9V NEDA 1604 or 6F22 battery
  •  Dimensions: 138(L) x 69(W) x 31mm(H)
  •  Weight: ≈ 170g (battery included)
  •  Operating environment: 0˚C ~ 40˚C, at <80% RH
  •  Accuracies are guaranteed for 1  year, 18˚C to 28˚C , less than 80% RH
SPECIFICATION:
  •  DC Voltage: 200mV/2V/20V/200V/1000V, ±(0.5% + 4)
  •  AC Voltage: 200mV/2V/20V/200V/750V,±(0.8% + 5)
  •  DC Current: 200uA/2mA/20mA/20mA/2A/20A, ±(1.0% + 5)
  •  AC Current: 200uA/2mA/20mA/20mA/2A/20A, ±(1.5% + 5)
  •  Resistance: 200Ω/2kΩ/20kΩ/200kΩ/2MΩ/20MΩ, ±(0.8% + 1)
  •  Temperature: -40 ~ 1000 °C / 0 ~ 1832 °F ±(1.0% + 5)
  •  Dimensions : 170(H) x 86(W) x 35(D)mm
FEATURES:
  •  3 ½ Digital Multimeter, 1999 Counts
  • Auto Power Off (APO) under natural operation
  • Non Contact Voltage (NCV) Test
  • Backlight LCD
SPECIAL FUNCTION:
  • Diode Test NCV
  • Transistor Testing Input impedance 10MΩ
  • Continuity Buzzer Approx. <30+10 Sampling Rate 3 times per second
  • Low Battery Display Approx. <7.5V AC Frequency Response 40-400Hz
  • Auto Power OFF Approx. 30 min Power 9V (6F22) x 1
 
ContentThe DT-4200 Hioki Digital Multimeter Series consist of a complete lineup of 9 models ranging from professional to industrial to pocket meters, delivering a super fast response rate and safety features that take electrical testing to a higher level. The DT4256 is a digital multimeter designed to deliver maximum functionality for use in a wide range of settings. CAT IV 600 V, CAT III 1000 VMeco 108B+ TRMS Auto ranging Digital Multimeter 60mV to 1000V AC/DC is a reliable and accurate multimeter that can be used to measure AC/DC voltage, current, and resistance. It is easy to use and has a large LCD screen that makes it easy to read. This Meco Digital Multimeter is a great addition to any tool box. It has a large, easy-to-read 3 5/6 digit LCD display with backlight, and is auto ranging. It can measure DC voltage up to 600V, DC current up to 10A, AC voltage up to 600V, and resistance up to 60M??. It is also TRMS and has a data hold function. This multimeter is perfect for any electrician, electronics technician, or anyone who needs to test voltage, current, or resistance. The Multimeters are the perfect tools for measuring and testing. With dimensions of 130x65x32 mm, they are easy to handle and use.Meco Digital Multimeter 801 Auto is suitable for conducting diode tests. It comes with audible continuity and data hold features. The multimeter is equipped with auto/manual 3 digit 3999 count LCD with duty cycle temperature capacitance frequency and APO.Meco Digital Multimeter 801 Auto is suitable for conducting diode tests. It comes with audible continuity and data hold features. The multimeter is equipped with auto/manual 3 digit 3999 count LCD with duty cycle temperature capacitance frequency and APO.The HTC DM-98 digital multimeter is a versatile and easy-to-use tool that is exclusively build for a variety of applications. It features a large, easy-to-read LCD display and a wide range of functions, including AC/DC voltage and current, resistance, capacitance, and frequency measurement. The HTC DM-98 is a dual LCD digital multimeter with a bargraph display.The instrument of this series is a small hand-held 3 ½ digital multimeter featuring stable, highly reliable and anti-drop performance. It is provided with a LCD display of 15mm height for clear reading. The circuit design takes LSI double integral A/D converter as its core under the protection of an overload protection circuit, making it a superior and handy instrument. It can be used to measure DC and AC voltage, DC current, resistance, diodes, transistors, temperature and for in-circuit continuity test.HTC DM-86 Digital Multimeter is a reliable and accurate device that is perfect for a wide range of applications. It features a large, easy-to-read LCD display and a wide variety of functions including AC/DC voltage and current, resistance, capacitance, frequency, and temperature. The HTC 3 digit Digital Multimeter is a professional-grade tool designed for precision measurement of DC and AC voltages, DC current, and resistance. With a large and easy-to-read LCD display, the multimeter is simple to use and provides accurate readings. The DC voltage accuracy is(0.5% + 4 Digit) and the AC voltage accuracy is(0.8% + 5). The DC current accuracy is (1.0% + 5) and the AC current accuracy is(1.5% + 5). The resistance accuracy is (0.8%rdg + 1 dgt). The battery test is 9V/1.5V/3V. The multimeter is compact and lightweight, making it easy to carry and store.
Weight
DimensionsN/AN/AN/AN/AN/AN/A
Additional information

Related products