HIOKI DT-4255 Digital Multimeter

Brands: HIOKI

Category: MULTIMETER

Availability: In Stock

SPECIFICATIONS

DC Voltage range : 600.0 mV to 1000 V , 5 ranges
Accuracy : ±0.3 % rdg. ±3 dgt.
AC Voltage range : 6.000 V to 1000 V, 4 ranges, Frequency characteristics: 40 Hz – 1 kHz
Accuracy : 40 – 500 Hz : ±0.9 % rdg. ±3 dgt. (True RMS, crest factor 3)
Resistance range : 600.0 Ω to 60.00 MΩ, 6 ranges, Basic accuracy: ±0.7 % rdg. ±3 dgt.
AC Current Range ( use with Clamp on probes ) : 10.00 A to 1000 A, 7 ranges, Add the Clamp on probe accuracy to basic accuracy 40 – 1 kHz : ±0.9 % rdg. ±3 dgt. (True RMS, crest factor 3)
Voltage Detection : Hi: AC40 V to 600 V, Lo: AC80 V to 600 V
Frequency Range : 99.99 Hz to 99.99 kHz, 4 ranges (limited by the minimum detectable voltage),
Accuracy : ±0.1 % rdg. ±1 dgt
Capacitance Range : 1.000 μF to 10.00 mF, 5 ranges
Accuracy : ±1.9 % rdg. ±5 dgt.
Continuity check : Continuity threshold [ON]: 25 Ω or less , [OFF]: 245 Ω or more, Response time: 0.5 ms or more
Diode Test : Open terminal voltage: 5.0 V or less, Testing current 0.5 mA or less, Threshold of forward voltage: 0.15 V to 1.5 V
Display : Main and sub displays: 4-digits LCD, max. 6000 digits, bar graph
Display Refresh Rate : 5 times/s (Capacitance measurement: 0.05 to 5 times/s, depending on measured value, Frequency: 1 to 2 time/s, Temperature: 1 time/s )
Dimensions : 84 mm (3.31 in)W × 174 mm (6.85 in)H× 52 mm (2.05 in)D
Mass : 390 g (13.8 oz) (including batteries and holster)
Including Accessories : Test lead L9207-10 ×1, Holster ×1, Instruction manual ×1, LR03 alkaline battery ×4

FEATURES

Prevents short-circuit accidents with a fast-blow fuse and current-limiting resistor (DT4255)
Low-pass filter cuts high harmonics (when measuring inverter fundamental waveforms)
Prevents accidents with clamp-on sensor-based current measurement (DT4254, DT4255)
Broad -25°C to 65°C (-13°F to 149°F) operating temperature range (DT4254, DT4255)
Voltage detection function (DT4254, DT4255)
Dual display lets you check voltage and frequency simultaneously

Category: MULTIMETER

Description
Reviews (0)

Description

The 4200 Series Hioki Digital Multimeter Series consist of a complete lineup of 9 models ranging from professional to industrial to pocket meters, delivering a super fast response rate and safety features that take electrical testing to a higher level. The DT4255 is a digital multimeter designed for maximum safety with voltage measurement terminals that are protected by a fuse.

Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “HIOKI DT-4255 Digital Multimeter”

Quick Comparison

Settings	HIOKI DT-4255 Digital Multimeter remove	HTC DM-91 DIGITAL MULTIMETER remove	BEETECH MAS 830-L 600V AC/DC DIGITAL MULTIMETER remove	MECO 801 6000 COUNTS JUNIOR DIGITAL MULTIMETER remove	MECO 171B+ TRMS DIGITAL MULTIMETER remove	MECO-G-R-801T DIGITAL MULTIMETER remove
Name	HIOKI DT-4255 Digital Multimeter remove	HTC DM-91 DIGITAL MULTIMETER remove	BEETECH MAS 830-L 600V AC/DC DIGITAL MULTIMETER remove	MECO 801 6000 COUNTS JUNIOR DIGITAL MULTIMETER remove	MECO 171B+ TRMS DIGITAL MULTIMETER remove	MECO-G-R-801T DIGITAL MULTIMETER remove
Image
SKU
Rating
Price
Stock
Availability
Add to cart	Read more	Read more	Read more	Read more	Read more	Read more
Description	SPECIFICATIONS DC Voltage range : 600.0 mV to 1000 V , 5 ranges Accuracy : ±0.3 % rdg. ±3 dgt. AC Voltage range : 6.000 V to 1000 V, 4 ranges, Frequency characteristics: 40 Hz - 1 kHz Accuracy : 40 - 500 Hz : ±0.9 % rdg. ±3 dgt. (True RMS, crest factor 3) Resistance range : 600.0 Ω to 60.00 MΩ, 6 ranges, Basic accuracy: ±0.7 % rdg. ±3 dgt. AC Current Range ( use with Clamp on probes ) : 10.00 A to 1000 A, 7 ranges, Add the Clamp on probe accuracy to basic accuracy 40 - 1 kHz : ±0.9 % rdg. ±3 dgt. (True RMS, crest factor 3) Voltage Detection : Hi: AC40 V to 600 V, Lo: AC80 V to 600 V Frequency Range : 99.99 Hz to 99.99 kHz, 4 ranges (limited by the minimum detectable voltage), Accuracy : ±0.1 % rdg. ±1 dgt Capacitance Range : 1.000 μF to 10.00 mF, 5 ranges Accuracy : ±1.9 % rdg. ±5 dgt. Continuity check : Continuity threshold [ON]: 25 Ω or less , [OFF]: 245 Ω or more, Response time: 0.5 ms or more Diode Test : Open terminal voltage: 5.0 V or less, Testing current 0.5 mA or less, Threshold of forward voltage: 0.15 V to 1.5 V Display : Main and sub displays: 4-digits LCD, max. 6000 digits, bar graph Display Refresh Rate : 5 times/s (Capacitance measurement: 0.05 to 5 times/s, depending on measured value, Frequency: 1 to 2 time/s, Temperature: 1 time/s ) Dimensions : 84 mm (3.31 in)W × 174 mm (6.85 in)H× 52 mm (2.05 in)D Mass : 390 g (13.8 oz) (including batteries and holster) Including Accessories : Test lead L9207-10 ×1, Holster ×1, Instruction manual ×1, LR03 alkaline battery ×4 FEATURES Prevents short-circuit accidents with a fast-blow fuse and current-limiting resistor (DT4255) Low-pass filter cuts high harmonics (when measuring inverter fundamental waveforms) Prevents accidents with clamp-on sensor-based current measurement (DT4254, DT4255) Broad -25°C to 65°C (-13°F to 149°F) operating temperature range (DT4254, DT4255) Voltage detection function (DT4254, DT4255) Dual display lets you check voltage and frequency simultaneously	SPECIFICATIONS DC VOLTAGE RANGE : 1000V AC VOLTAGE RANGE : 700V RESISTANCE RANGE : 200MΩ DC CURRENT RANGE : 10A AC CURRENT RANGE : 10A FREQUENCY RANGE : 200KHz TRANSISTOR hFE TEST : NPN or PNP TEMPERATURE RANGE : 400 ⁓ 1000 FEATURES 3½ Digit Manual Multimeter with Backlight 1,999 Count Auto Power Off (APO) under natural operation Terminal Shutter Interlock Mechanism	SPECIFICATIONS DC Voltage : 600V AC Voltage : 600V DCA : 10A Resistance : 2MΩ Transistor hFE test : Vce = 3V FEATURES Display Mode: 3 ½ digit, 7 segment LCD display Maximum Display: 1999 AC & DC Voltage DC Current Resistance Temperature Transistor Hfe Test Diode & Continuity Test Polarity indication: “-” displayed for negative polarity Low battery indication: Over range indication: “1” displayed Auto Power Off Back light optional Power supply: 9V NEDA 1604 or 6F22 battery Dimensions: 138(L) x 69(W) x 31mm(H) Weight: ≈ 170g (battery included) Operating environment: 0˚C ~ 40˚C, at <80% RH Accuracies are guaranteed for 1 year, 18˚C to 28˚C , less than 80% RH	SPECIFICATIONS : AC VOLTAGE : Up to 750 V DC VOLTAGE : Up to 1000 V AC RESPONSE : 40 Hz ~ 1 KHz ACCURACY : +-(0.8% rdg + 5 dgt) DC CURRENT : 10 A RESISTANCE : Up to 60 MOhm CAPACITANCE : Up to 100 mF DIMENSIONS : 147 x 71 x 45 mm FEATURES : 3 5/6 Digits 6000 Counts TRMS Auto Ranging NCV (LED, Buzzer & EF Strength) Continuity Test (LED, Buzzer & EF Strength) LCD with Backlight Data Hold Auto Power Off Holster with Magnet Torch Light Test Lead Gripper Low Battery Indication	SPECIFICATIONS : AC VOLTAGE : 600 MV / 6 / 60 / 600 /750 v DC VOLTAGE : 600 Mv /6 / 60 / 600 / 1000v AC CURRENT : 600 / 6000 µA / 60 / 600 mA / 6 / 20 A DC CURRENT : 600 / 6000 µA / 60 / 600 mA / 6 / 20 A FREQUENCY : 99.99 Hz ~ 20.00 MHz RESISTANCE : 600 ohm / 6 / 60 / 600 k ohm / 6 / 60 M ohm TEMPERATURE : - 40°C ~ 1000°C / - 40°F ~ 1832°F FEATURES : Model : 171B + TRMS Display : 3 5/6 digit Counts : 6000 digits	SPECIFICATIONS : DC VOLTAGE : 600mV-600V AC VOLTAGE : 600mV to 600V AC CURRENT : 600µA-10A DC CURRENT : 600µA-10A DISPLAY : 3⅚ Digit DC CURRENT ACCURACY : ± (1.5% + 5dgts) AC CURRENT ACCURACY : ± (1.5% + 7dgts) TEMPERATURE : -40°C - 1000°C FREQUENCY : ± (0.5% + 3dgts) RESISTANCE : 600Ω-60MΩ FEATURES : Auto/Manual Ranging.. Data Hold.. NCV APO, Battery & Temperature Check. Max Hold.. Diode Test.. HFE Test, TRMS.. Duty Cycle - 0.01% - 99.9%.. Audible Continuity Test..
Content	The 4200 Series Hioki Digital Multimeter Series consist of a complete lineup of 9 models ranging from professional to industrial to pocket meters, delivering a super fast response rate and safety features that take electrical testing to a higher level. The DT4255 is a digital multimeter designed for maximum safety with voltage measurement terminals that are protected by a fuse.	This 3 digits display digital Multimeter comes with 2000 counts and an Interlocking terminal. Equipped with a built-in hanging kit, test leads, and holster, this Multimeter is available in various specifications and affordable prices. HTC is one of the most trusted and renowned brands which manufactures all its products using superior quality raw materials, advanced technologies, and utmost precision. This HTC DM-91 digital Multimeter is widely acknowledged in the market for higher accuracy, efficiency, compact design, easy handling, user-friendly operations, and longer life. The special functions of this device include the diode test, transistor testing, and continuity buzzer. Applicable for commercial, residential, and industrial sectors, this device is very durable and reliable. The performance of this device is superb with accurate readings. Get this digital Multimeter online in various other specifications and features as per your specific requirements.	The instrument of this series is a small hand-held 3 ½ digital multimeter featuring stable, highly reliable and anti-drop performance. It is provided with a LCD display of 15mm height for clear reading. The circuit design takes LSI double integral A/D converter as its core under the protection of an overload protection circuit, making it a superior and handy instrument. It can be used to measure DC and AC voltage, DC current, resistance, diodes, transistors, temperature and for in-circuit continuity test.		The MECO 171B + TRMS digital multimeter is ideal for measuring multiple electrical values, primarily, voltage (volts or V), current (ampere or A) and resistance (ohms or Ω). It is a very useful electrical power testing tool for students and technicians, especially in the electrical industries. This is one among the most preferred testing and measuring equipments as it generates faultless results in values like AC/DC voltage, AC/DC current, resistance and capacitance. Try the MECO 3 5/6 Digits 6000 Counts Autoranging Digital Multimeter for meeting all your electrical measuring needs with a battery life of 200 hours. MECO digital multimeters also come with a pair of test leads, holster, and K type thermocouples.	The Meco-G 801T Digital Multimeter AC Voltage Range 600mV to 600V is one of the best selling products in the market. This device gives you accurate reading, helping you measure the electric supply. Well with this product you can measure voltage, current, and resistance of a circuit. The other name for this device is volt-ohm-milliammeter. This multimeter can be used to measure batteries, household wirings, electric motors and power supplies.
Weight
Dimensions	N/A	N/A	N/A	N/A	N/A	N/A
Additional information