Description | SPECIFICATIONS
- DC Voltage range : 600.0 mV to 1700 V (*1) 5 ranges
Accuracy : ±0.3 % rdg. ±3 dgt.
- AC Voltage range : 6.000 V to 1000 V, 4 ranges, Frequency characteristics: 40 Hz - 1 kHz
Accuracy : 40 - 500 Hz : ±0.9 % rdg. ±3 dgt. (True RMS, crest factor 3)
- Voltage Detection : Hi: AC40 V to 600 V, Lo: AC80 V to 600 V
- Frequency Range : 99.99 Hz to 99.99 kHz, 4 ranges (limited by the minimum detectable voltage),
Basic accuracy : ±0.1 % rdg. ±1 dgt.
- Display : Main and sub displays: 4-digits LCD, max. 6000 digits, bar graph
- Display Refresh Rate : 5 times/s (Capacitance measurement: 0.05 to 5 times/s, depending on measured value, Frequency: 1 to 2 time/s, Temperature: 1 time/s )
- Dimensions : 84 mm (3.31 in)W × 174 mm (6.85 in)H× 52 mm (2.05 in)D
- Mass : 390 g (13.8 oz) (including batteries and holster)
- Including Accessories : Test lead L9207-10 ×1, Holster ×1, Instruction manual ×1, LR03 alkaline battery ×4
FEATURES
- The voltage measurement model, which is ideal for solar power system and power equipment management, measures up to 1700 V DC (*1) during open voltage inspections (DT4254)
- Low-pass filter cuts high harmonics (when measuring inverter fundamental waveforms)
- Prevents accidents with clamp-on sensor-based current measurement (DT4254, DT4255)
- Broad -25°C (-13°F) to 65°C (149°F) operating temperature range (DT4254, DT4255)
- Voltage detection function (DT4254, DT4255)
- Dual display lets you check voltage and frequency simultaneously
| SPECIFICATIONS :
- AC VOLTAGE : Up to 750 V
- DC VOLTAGE : Up to 1000 V
- AC RESPONSE : 40 Hz ~ 1 KHz
- ACCURACY : +-(0.8% rdg + 5 dgt)
- DC CURRENT : 10 A
- RESISTANCE : Up to 60 MOhm
- CAPACITANCE : Up to 100 mF
- DIMENSIONS : 147 x 71 x 45 mm
FEATURES :
- 3 5/6 Digits
- 6000 Counts
- TRMS
- Auto Ranging
- NCV (LED, Buzzer & EF Strength)
- Continuity Test (LED, Buzzer & EF Strength)
- LCD with Backlight
- Data Hold
- Auto Power Off
- Holster with Magnet
- Torch Light
- Test Lead Gripper
- Low Battery Indication
| SPCIFICATIONS :
- AC CURRENT : 400µA / 4000µA / 40mA / 400mA / 4 / 20A
- DC CURRENT : 400µA / 4000µA / 40mA / 400mA / 4 / 20A
- DC VOLTAGE : 400mV / 4 / 40 / 400 / 1000V
- AC VOLTAGE : 4 / 40 / 400 / 750V
- TEMPERATURE : -20°C ~ 1300°C
- RESISTANCE : 400Ω / 4kΩ / 40kΩ / 400kΩ / 4MΩ / 40MΩ
- CAPACITANCE : 40 / 400nF / 4 /40 /100 uF
- FREQUENCY : 9.999 Hz-9.999 MHz
FEATURES :
- Auto / Manual, 3 Digit, 3999 Count LCD, with APO, Capacitance, Frequency, Duty Cycle & Temperature.
- Diode Test, Audible Continuity, Data Hold.
| SPECIFICATIONS
- DC Voltage : 1000V
- AC Voltage : 750V
- DCA : 20A
- ACA : 20A
- Capacitance : 200uF
- Resistance : 2000MΩ
- Frequency: 200kHz
- Temperature : -20°C to 1000°C
FEATURES
- Display Mode: 31/2 LCD display
- Maximum Display: 1999, updates every 2-3s
- Measuring method: Dual – slope integration A/D converter
- AC & DC Voltage
- AC & DC Current
- Capacitance
- Resistance
- Frequency
- Temperature
- Over range display: “1” displayed
- Low battery indication:
- Polarity indication: “-” displayed for negative polarity
- Display Mode: 31/2 LCD display
- Maximum Display: 1999, updates every 2-3s
- Measuring method: Dual – slope integration A/D converter
- AC & DC Voltage
- AC & DC Current
- Capacitance
- Resistance
- Frequency
- Temperature
- Over range display: “1” displayed
- Low battery indication:
- Polarity indication: “-” displayed for negative polarity
- Power supply: 9V
- Dimensions: 189(L) x 91(W) x 31.5mm(H)
- Weight: ≈ 280g (battery included)
- Operating environment: 0˚C ~ 40˚C
- Storage environment: -10˚C ~ 50˚C
- Accuracies are guaranteed for 1 year, 18˚C - 28 ˚C , less than 80% RH
- Fuse protection: F 500mA/250V
- Maximum voltage between terminals and earth ground: 1000VDC or 700VAC
| SPECIFICATIONS
- DC VOLTAGE : 1000V
- AC VOLTAGE : 750V
- DC CURRENT : 10A
- AC CURRENT : 10A
- FREQUENCY / DUTY : 10kHz
- RESISTANCE : 60MΩ
- CAPACITANCE : 1000µF
- TEMPERATURE : 752~1832°F
FEATURES
- 3⅚ Digit
- 6000 Count
- Dual LCD with Bargraph
- Live test (sound and light alarm)
- NCV
- True RMS
- Double color backlight
- Torch
- Diode Test
- Continuity Buzzer
- Power AA 1.5V X 2
| SPECIFICATIONS :
- BATTERY : Two 1.5bV 'AAA' Battery
- DIMENSION : 130 x 65 x 32mm (approx.)
- TEMPERATURE : -20 deg C ~ 1000 deg C / -4 deg F ~ 1832 deg F
- WEIGHT : 130gms Including Battery (approx.)
FEATURES :
- TRMS
- Auto / Manual Ranging
- 9999 Count
- LCD with Backlight
- Auto Power Off
- Capacitance
- Resistance
- NCV
- Frequency
- Duty Cycle
- Temperature
- Diode Test
- Audible Continuity
- Data Hold
|
Content | The DT-4200 Hioki Digital Multimeter Series consist of a complete lineup of 9 models ranging from professional to industrial to pocket meters, delivering a super fast response rate and safety features that take electrical testing to a higher level. The DT4254 is a voltage measurement only model designed for measuring photovoltaic modules and other high-voltage targets up to 1700 V DC (*1). | | Meco Digital Multimeter 801 Auto is suitable for conducting diode tests. It comes with audible continuity and data hold features. The multimeter is equipped with auto/manual 3 digit 3999 count LCD with duty cycle temperature capacitance frequency and APO.Meco Digital Multimeter 801 Auto is suitable for conducting diode tests. It comes with audible continuity and data hold features. The multimeter is equipped with auto/manual 3 digit 3999 count LCD with duty cycle temperature capacitance frequency and APO. | The meter is a hand held 3 ½ digital multimeter for measuring DC and AC voltage, DC and AC current, resistance, diode, transistor, frequency, temperature, capacitance and continuity test with battery operated. The back light of display is optional. This multimeter is designed according to IEC – 1010 concerning electronic measuring instruments with an overvoltage category (CATII) and pollution 2. | The HTC DM-98 digital multimeter is a versatile and easy-to-use tool that is exclusively build for a variety of applications. It features a large, easy-to-read LCD display and a wide range of functions, including AC/DC voltage and current, resistance, capacitance, and frequency measurement. The HTC DM-98 is a dual LCD digital multimeter with a bargraph display. | |
Reviews
There are no reviews yet.