HIOKI DT-4253 Digital Multimeter

Brands: HIOKI

Category: MULTIMETER

Availability: In Stock

SPECIFICATIONS

DC Voltage range : 600.0 mV to 1000 V, 5 ranges
Accuracy : ±0.3 % rdg. ±5 dgt.
AC Voltage range : 6.000 V to 1000 V, 4 ranges, Frequency characteristics: 40 Hz – 1 kHz
Accuracy : 40 – 500 Hz : ±0.9 % rdg. ±3 dgt. (True RMS, crest factor 3)
Resistance range : 600.0 Ω to 60.00 MΩ, 6 ranges
Basic Accuracy : ±0.7 % rdg. ±5 dg
DC Current range : 60.00 μA to 60.00 mA, 4 ranges
Accuracy : ±0.8 % rdg. ±5 dgt.
AC Current range : 10.00 A to 1000 A, 7 range
Accuracy : 40 – 1 kHz : ±0.9 % rdg. ±3 dgt. (True RMS, crest factor 3)
Capacitance Range : 1.000 μF to 10.00 mF, 5 ranges
Accuracy : ±1.9 % rdg. ±5 dgt.
Frequency Range : 99.99 Hz to 99.99 kHz, 4 ranges (limited by the minimum detectable voltage)
Accuracy : ±0.1 % rdg. ±1 dgt.
Continuity Check : Continuity threshold [ON]: 25 Ω or less (Indicate buzzer sound, red LED), [OFF]: 245 Ω or more Response time: 0.5 ms or more
Diode Test : Open terminal voltage: 5.0 V or less, Testing current 0.5 mA or less, Threshold of forward voltage: 0.15 V to 1.5 V
Display : Main and sub displays: 4-digits LCD, max. 6000 digits, bar graph
Display Refresh Rate : 5 times/s (Capacitance measurement: 0.05 to 5 times/s, depending on measured value, Frequency: 1 to 2 time/s, Temperature: 1 time/s )
Dimensions : 84 mm (3.31 in)W × 174 mm (6.85 in)H× 52 mm (2.05 in)D
Mass : 390 g (13.8 oz) (including batteries and holster)
Including Accessories : Test lead L9207-10 ×1, Holster ×1, Instruction manual ×1, LR03 alkaline battery ×4

FEATURES

Ideal for measuring currents ranging from instrumentation signals (4 to 20 mA) to flame currents (μA) with built in high-sensitivity current ranges (DT4253)
Low-pass filter cuts high harmonics (when measuring inverter fundamental waveforms)
Dual display lets you check voltage and frequency simultaneously

Category: MULTIMETER

Description
Reviews (0)

Description

The DT-4200 Hioki Digital Multimeter Series consist of a complete lineup of 9 models ranging from professional to industrial to pocket meters, delivering a super fast response rate and safety features that take electrical testing to a higher level. The DT4253 is a digital multimeter designed specifically for HVAC testing, with ±0.5% DC V accuracy, temperature and clamp sensor testing, and wide 40 Hz to 1 kHz bandwidth.

Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “HIOKI DT-4253 Digital Multimeter”

Quick Comparison

Settings	HIOKI DT-4253 Digital Multimeter remove	MECO-G R-909T DIGITAL MULTIMETER remove	MECO 603 DIGITAL MULTIMETER remove	BEETECH H-901 3 1/2 1000V / 750V AC 20A AC/DC DIGITAL MULTIMETER remove	HTC 830 L+ DIGITAL MULTIMETER remove	MECO 801 AUTO DIGITAL MULTIMETER remove
Name	HIOKI DT-4253 Digital Multimeter remove	MECO-G R-909T DIGITAL MULTIMETER remove	MECO 603 DIGITAL MULTIMETER remove	BEETECH H-901 3 1/2 1000V / 750V AC 20A AC/DC DIGITAL MULTIMETER remove	HTC 830 L+ DIGITAL MULTIMETER remove	MECO 801 AUTO DIGITAL MULTIMETER remove
Image
SKU
Rating
Price
Stock
Availability
Add to cart	Read more	Read more	Read more	Read more	Read more	Read more
Description	SPECIFICATIONS DC Voltage range : 600.0 mV to 1000 V, 5 ranges Accuracy : ±0.3 % rdg. ±5 dgt. AC Voltage range : 6.000 V to 1000 V, 4 ranges, Frequency characteristics: 40 Hz - 1 kHz Accuracy : 40 - 500 Hz : ±0.9 % rdg. ±3 dgt. (True RMS, crest factor 3) Resistance range : 600.0 Ω to 60.00 MΩ, 6 ranges Basic Accuracy : ±0.7 % rdg. ±5 dg DC Current range : 60.00 μA to 60.00 mA, 4 ranges Accuracy : ±0.8 % rdg. ±5 dgt. AC Current range : 10.00 A to 1000 A, 7 range Accuracy : 40 - 1 kHz : ±0.9 % rdg. ±3 dgt. (True RMS, crest factor 3) Capacitance Range : 1.000 μF to 10.00 mF, 5 ranges Accuracy : ±1.9 % rdg. ±5 dgt. Frequency Range : 99.99 Hz to 99.99 kHz, 4 ranges (limited by the minimum detectable voltage) Accuracy : ±0.1 % rdg. ±1 dgt. Continuity Check : Continuity threshold [ON]: 25 Ω or less (Indicate buzzer sound, red LED), [OFF]: 245 Ω or more Response time: 0.5 ms or more Diode Test : Open terminal voltage: 5.0 V or less, Testing current 0.5 mA or less, Threshold of forward voltage: 0.15 V to 1.5 V Display : Main and sub displays: 4-digits LCD, max. 6000 digits, bar graph Display Refresh Rate : 5 times/s (Capacitance measurement: 0.05 to 5 times/s, depending on measured value, Frequency: 1 to 2 time/s, Temperature: 1 time/s ) Dimensions : 84 mm (3.31 in)W × 174 mm (6.85 in)H× 52 mm (2.05 in)D Mass : 390 g (13.8 oz) (including batteries and holster) Including Accessories : Test lead L9207-10 ×1, Holster ×1, Instruction manual ×1, LR03 alkaline battery ×4 FEATURES Ideal for measuring currents ranging from instrumentation signals (4 to 20 mA) to flame currents (μA) with built in high-sensitivity current ranges (DT4253) Low-pass filter cuts high harmonics (when measuring inverter fundamental waveforms) Dual display lets you check voltage and frequency simultaneously	SPECIFICATIONS : DC VOLTAGE : 1000V AC VOLTAGE : 750V DC AMPERE : 10A AC AMPERE : 10A RESISTANCE : 60 M ohms CAPACITANCE : 20µF FREQUENCY : 60MHz FEATURES : Hang-by Magnetic Strip LCD Display Silicone Button Function Switch 10A Jack µA/mA Jack "COM" Input Terminal "INPUT" Input Terminal Holster	SPECIFICATIONS : AC CURRENT : 200µA / 2mA / 20mA / 200mA / 20A (50-500Hz) DC CURRENT : 200µA / 2mA / 20mA / 200mA / 20A AC VOLTAGE : 200mV / 2 / 20 / 200 / 750V DC VOLTAGE : 200mV / 2 / 20 / 200 / 1000V RESISTANCE : 200Ω / 2kΩ / 20kΩ / 200kΩ / 2000kΩ / 20MΩ / 200MΩ FEATURES : Auto Power Off. Overload Protection & Multiple Test Facility. Rugged & Durable Design.	SPECIFICATIONS DC Voltage : 1000V AC Voltage : 750V DCA : 20A ACA : 20A Capacitance : 200uF Resistance : 2000MΩ Frequency: 200kHz Temperature : -20°C to 1000°C FEATURES Display Mode: 31/2 LCD display Maximum Display: 1999, updates every 2-3s Measuring method: Dual – slope integration A/D converter AC & DC Voltage AC & DC Current Capacitance Resistance Frequency Temperature Over range display: “1” displayed Low battery indication: Polarity indication: “-” displayed for negative polarity Display Mode: 31/2 LCD display Maximum Display: 1999, updates every 2-3s Measuring method: Dual – slope integration A/D converter AC & DC Voltage AC & DC Current Capacitance Resistance Frequency Temperature Over range display: “1” displayed Low battery indication: Polarity indication: “-” displayed for negative polarity Power supply: 9V Dimensions: 189(L) x 91(W) x 31.5mm(H) Weight: ≈ 280g (battery included) Operating environment: 0˚C ~ 40˚C Storage environment: -10˚C ~ 50˚C Accuracies are guaranteed for 1 year, 18˚C - 28 ˚C , less than 80% RH Fuse protection: F 500mA/250V Maximum voltage between terminals and earth ground: 1000VDC or 700VAC	SPECIFICATIONS DC VOLTAGE : 600V AC VOLTAGE : 600V DC CURRENT : 10A RESISTANCE : 200MΩTRANSISTOR hFE TEST (0-1000) : NPN ＆ PNP FEATURES 3½ Digit Manual Multimeter with Backlight 1,999 Count Data Hold True RMS NCV hFE Test Overload Protection Low Battery Indication CAT II 600V Power AAA 1.5V x 2	SPCIFICATIONS : AC CURRENT : 400µA / 4000µA / 40mA / 400mA / 4 / 20A DC CURRENT : 400µA / 4000µA / 40mA / 400mA / 4 / 20A DC VOLTAGE : 400mV / 4 / 40 / 400 / 1000V AC VOLTAGE : 4 / 40 / 400 / 750V TEMPERATURE : -20°C ~ 1300°C RESISTANCE : 400Ω / 4kΩ / 40kΩ / 400kΩ / 4MΩ / 40MΩ CAPACITANCE : 40 / 400nF / 4 /40 /100 uF FREQUENCY : 9.999 Hz-9.999 MHz FEATURES : Auto / Manual, 3 Digit, 3999 Count LCD, with APO, Capacitance, Frequency, Duty Cycle & Temperature. Diode Test, Audible Continuity, Data Hold.
Content	The DT-4200 Hioki Digital Multimeter Series consist of a complete lineup of 9 models ranging from professional to industrial to pocket meters, delivering a super fast response rate and safety features that take electrical testing to a higher level. The DT4253 is a digital multimeter designed specifically for HVAC testing, with ±0.5% DC V accuracy, temperature and clamp sensor testing, and wide 40 Hz to 1 kHz bandwidth.	The MECO-G Digital Auto Ranging Multimeter, R-909T is one of the best selling products in the market. This device gives you accurate reading, helping you measure the electric supply. Well with this product you can measure voltage, current, and resistance of a circuit. The other name for this device is volt-ohm-milliammeter. This multimeter can be used to measure batteries, household wirings, electric motors and power supplies.	Equipped with 3 digits 1999 count LCD display, Meco Digital Multimeter, 603 is well-known in the market for its superior quality and great performance. The size of its display screen is 17 mm with audible continuity. It comes with a diode test and HFE test. This multimeter has an AC voltage of 200mV / 2 / 20 / 200 / 750V and DC current of 200 A / 2mA / 20mA / 200mA / 20A. With a resistance of 200 / 2k / 20k / 200k / 2000k / 200 / 200M, this device is applicable in various fields including physics, electronics, and many others. Suitable for residential, commercial, and industrial sectors, this device is sourced from the well-known brand Meco which manufactures all its products with premium quality raw materials, advanced techniques, and utmost precision. It comes with a warranty period of 1 year. Widely acknowledged in the market for higher accuracy, reliability, efficient functionality, compact design, lightweight, user-friendliness, and longer life, this device comes in various specifications as per the needs of the customers.	The meter is a hand held 3 ½ digital multimeter for measuring DC and AC voltage, DC and AC current, resistance, diode, transistor, frequency, temperature, capacitance and continuity test with battery operated. The back light of display is optional. This multimeter is designed according to IEC – 1010 concerning electronic measuring instruments with an overvoltage category (CATII) and pollution 2.	HTC DM-830L+ Digital Manual Multimeter with Backlight AC/DC Ammeter Ohm Volt Tester is a reliable and easy-to-use digital multimeter. It is perfect for measuring AC/DC voltage, current, and resistance. HTC-830L+ Digital Multimeter is a great device that can help you test and measure various electrical properties. This digital multimeter is especially useful for measuring DC voltage and current, AC voltage and current, and resistance. Additionally, the device is also useful for continuity testing and diode testing. The digital multimeter has a large LCD screen that makes it easy to read the measurements. The digital multimeter also has a backlight that makes it easy to use in low light conditions. The digital multimeter is powered by a 9V battery. The PowerTech PT-1285 is a Multimeter that is 140x72x30 mm and weighs 0.31 kg.	Meco Digital Multimeter 801 Auto is suitable for conducting diode tests. It comes with audible continuity and data hold features. The multimeter is equipped with auto/manual 3 digit 3999 count LCD with duty cycle temperature capacitance frequency and APO.Meco Digital Multimeter 801 Auto is suitable for conducting diode tests. It comes with audible continuity and data hold features. The multimeter is equipped with auto/manual 3 digit 3999 count LCD with duty cycle temperature capacitance frequency and APO.
Weight
Dimensions	N/A	N/A	N/A	N/A	N/A	N/A
Additional information