| Description | SPECIFICATIONS
- Earth Resistance Ranges :
Range : 0-20 Ohms
Accuracy : ± (2%+10)
Range : 0-200 Ohms
Accuracy : ± (2%+3)
Range : 0-2000 Ohms
Accuracy : ± (2%+3)
- AC Earth Voltage :
Range : 0-200 V
Accuracy : ± (1%+4)
- Display Count : 2000
- Operating Temperature : 5° to 40°C
- Storage Temperature : 20 °C - 60 °C
- Relative Humidity : 80% RH(no fog)
- Altitude Level : 2000 Meters
- Power : 1.5V Alkaline Batteries (LR6) x 6
- Dimensions : 160mm x 100mm x 70.5mm
- LCD Size : 70.6 mm x 34 mm
- Net Weight : 560 g
FEATURES
- Measurements of earth resistance across three ranges: 0-20 Ohms, 0-200 Ohms and 0-2000 Ohms
- Measures AC earth voltage from 0-200V
- 2000 count large-size LCD display with integrated backlight
- Rotary dial testing selection and clearly labeled ports for V, E, P and C connections
- Automatically powers off after ten minutes of inactivity
- Low battery indicator
- Data hold function
- Memory storage up to 20 records
- 2-wire and 3-wire testing procedures possible
| SPECIFICATIONS :
- DC VOLTAGE : 200mV - 1000 V
- AC VOLTAGE : 200mV to 750V
- AC ACCURACY : ?(1%+4)
- DC ACCURACY : ?(0.5%+1)
- AC CURRENT : 200?A - 20 A
- DC CURRENT : 200?A - 20 A
- RESISTANCE : ?0.8% + 1
- DIMENSIONS : 170x80x43 mm
FEATURES :
- 3 ½ digit liquid crystal display (LCD) with a maximum reading of 1999..
- Automatic, (-)negative polarity indication.
- Automatic.
- Highest digit of(1) or (-1) is diplayed at MSD.
- 3 measurements per second, nominal..
- VOLTAGE MEASUREMENT.
- CURRENT MEASUREMENT.
- RESISTANCE MEASUREMENTS.
- DIODE AND TRANSISTOR TEST MEASUREMENTS.
- TRANSISTOR JUNCTION TESTS.
- TRANSISTOR hFE MEASUREMENTS.
- CONTINUITY MEASUREMENTS.
| SPECIFICATIONS :
- AC VOLTAGE : 60 to 600mV, 6 to 750 V
- DC VOLTAGE : 600 mV6/60/600/1000 V
- AC CURRENT : 600, 6000A, 60, 600mA, 6 & 20 Amp
- DC CURRENT : 600Amp, 6000Amp, 60mA, 600mA, 6 & 20 Amp
- SENSITIVITY : 1 to 36 V AC
- RESISTANCE : 600/6/60/600 K6/60 M
- FREQUENCY : 99.99Hz to 10 MHz
FEATURES :
- Has Trms Sensor Type.
- Easy to Carry.
- Auto Power Off.
- Audible Continuity.
- Lcd with Backlight.
- Diode Test, Audible Continuity, Data Hold.
- It can Measure High Voltage.
- The Upper Limit of the Frequency if 20 MHz.
| SPECIFICATIONS
- DC VOLTAGE RANGE : 1000V
- AC VOLTAGE RANGE : 700V
- RESISTANCE RANGE : 200MΩ
- DC CURRENT RANGE : 10A
- AC CURRENT RANGE : 10A
- FREQUENCY RANGE : 200KHz
- TRANSISTOR hFE TEST : NPN or PNP
- TEMPERATURE RANGE : 400 ⁓ 1000
FEATURES
- 3½ Digit Manual Multimeter with Backlight
- 1,999 Count
- Auto Power Off (APO) under natural operation
- Terminal Shutter Interlock Mechanism
| SPECIFICATIONS :
- AC VOLTAGE : Up to 750 V
- DC VOLTAGE : Up to 1000 V
- AC RESPONSE : 40 Hz ~ 1 KHz
- ACCURACY : +-(0.8% rdg + 5 dgt)
- DC CURRENT : 10 A
- RESISTANCE : Up to 60 MOhm
- CAPACITANCE : Up to 100 mF
- DIMENSIONS : 147 x 71 x 45 mm
FEATURES :
- 3 5/6 Digits
- 6000 Counts
- TRMS
- Auto Ranging
- NCV (LED, Buzzer & EF Strength)
- Continuity Test (LED, Buzzer & EF Strength)
- LCD with Backlight
- Data Hold
- Auto Power Off
- Holster with Magnet
- Torch Light
- Test Lead Gripper
- Low Battery Indication
| SPECIFICATION:
- DC Voltage: 200mV/2V/20V/200V/1000V, ±(0.5% + 4)
- AC Voltage: 200mV/2V/20V/200V/750V,±(0.8% + 5)
- DC Current: 200uA/2mA/20mA/20mA/2A/20A, ±(1.0% + 5)
- AC Current: 200uA/2mA/20mA/20mA/2A/20A, ±(1.5% + 5)
- Resistance: 200Ω/2kΩ/20kΩ/200kΩ/2MΩ/20MΩ, ±(0.8% + 1)
- Temperature: -40 ~ 1000 °C / 0 ~ 1832 °F ±(1.0% + 5)
- Dimensions : 170(H) x 86(W) x 35(D)mm
FEATURES:
- 3 ½ Digital Multimeter, 1999 Counts
- Auto Power Off (APO) under natural operation
- Non Contact Voltage (NCV) Test
- Backlight LCD
SPECIAL FUNCTION:
- Diode Test NCV
- Transistor Testing Input impedance 10MΩ
- Continuity Buzzer Approx. <30+10 Sampling Rate 3 times per second
- Low Battery Display Approx. <7.5V AC Frequency Response 40-400Hz
- Auto Power OFF Approx. 30 min Power 9V (6F22) x 1
|
| Content | Very simple to use, simply make the connections necessary turn the rotary dial to the procedure you want and hit the testing button.To make testing easier the AET 23 is equipped with limited built-in memory that can store up to 20 testing results. A data hold function is also available that will temporarily store the last value taken but will not store the result in memory.This earth resistance tester is also suitable for use on both 50Hz and 60Hz frequencies, comes with a 2000 count backlit LCD display, is manual ranging and includes double insulation protection to ensure safety. | The Meco 603 Digital Multimeter AC Voltage Range 200mV to 750 V is one of the best selling products in the market. This device gives you accurate reading, helping you measure the electric supply. Well with this product you can measure voltage, current, and resistance of a circuit. The other name for this device is volt-ohm-milliammeter. This multimeter can be used to measure batteries, household wirings, electric motors and power supplies. | The Meco Autoranging Digital Multimeter is a top-of-the-line device that is best for electricians, technicians, and engineers. It offers a wide range of features, including autoranging, data hold, and a large LCD screen. The Meco MT6000 digital multimeter is a handheld device that is used to measure voltage, current, and resistance. It has a 3 digit LCD display and dimensions of 180x90x52 mm. The device can measure voltages from 60 to 1000 V, currents from 6 to 6000 mA, and resistances from 600 to 60000 ohms. With practical features like a backlight and multiple measurement ranges, this meter is best for use in a variety of applications. | This 3 digits display digital Multimeter comes with 2000 counts and an Interlocking terminal. Equipped with a built-in hanging kit, test leads, and holster, this Multimeter is available in various specifications and affordable prices. HTC is one of the most trusted and renowned brands which manufactures all its products using superior quality raw materials, advanced technologies, and utmost precision. This HTC DM-91 digital Multimeter is widely acknowledged in the market for higher accuracy, efficiency, compact design, easy handling, user-friendly operations, and longer life. The special functions of this device include the diode test, transistor testing, and continuity buzzer. Applicable for commercial, residential, and industrial sectors, this device is very durable and reliable. The performance of this device is superb with accurate readings. Get this digital Multimeter online in various other specifications and features as per your specific requirements. | | HTC DM-86 Digital Multimeter is a reliable and accurate device that is perfect for a wide range of applications. It features a large, easy-to-read LCD display and a wide variety of functions including AC/DC voltage and current, resistance, capacitance, frequency, and temperature. The HTC 3 digit Digital Multimeter is a professional-grade tool designed for precision measurement of DC and AC voltages, DC current, and resistance. With a large and easy-to-read LCD display, the multimeter is simple to use and provides accurate readings. The DC voltage accuracy is(0.5% + 4 Digit) and the AC voltage accuracy is(0.8% + 5). The DC current accuracy is (1.0% + 5) and the AC current accuracy is(1.5% + 5). The resistance accuracy is (0.8%rdg + 1 dgt). The battery test is 9V/1.5V/3V. The multimeter is compact and lightweight, making it easy to carry and store. |
Reviews
There are no reviews yet.