RISH Clamp ES1000/400 AC Measure Control Record Analyze 3 ¾ Digits digital clamp meter

SPECIFICATIONS

• DC Voltage Range :
  Es-1000A Ac : 400 mV-1000 V
  Es-400A Ac : 400 mV-1000 V
  Accuracy : ±(0.5 % + 2 Digits)
• AC Current Range :
  Es-1000A Ac : 0-1000 A
  Es-400A Ac : 0-400 A
  Accuracy: ±(1.5 % + 5 Digits)
• AC Current Resolution :
  Es-1000A Ac : 100 mA / 1 A
  Es-400A Ac : 10 mA / 100 mA
•  AC Voltage Range:
  Es-1000A Ac : 400 mV-1000 V
  Es-400A Ac : 400 mV-1000 V
  Accuracy: ±(1.0 % + 10 Digits)
•  Resistance Accuracy: ±(2.0 % + 5 Digits)
•  Capacitance Range: 5 nF-200 µF
  Accuracy: ±(5.0 % + 10 Digits)
•  Frequency: 0-500 KHz
  Accuracy: ±(0.2 % + 2 Digits)
• Temperature Range : 0° to 1300°C
  Accuracy : ±(2.0 % + 3 Digits)
• Operating temperature :  -10 to +50°C
• Storage temperature : -25 to +70°C
• Relative humidity : 45…75% non condensing
• Terminal Protection IP 52 for Housing and IP20 for terminals
• Battery Voltage : 1.5 x 2 V AAA size batteries
• Dimensions : 90mm (W) x 270mm (L) x 70mm (H)
• Jaw Size : RISH Clamp ES1000 AC Jaw opening of 51mm for standard wire diameter of 50mm and for RISH Clamp ES400 AC Jaw
  opening of 41mm for standard wire diameter of 40mm for 400A
• Weight : 0.6 Kg
• Safety : IEC 61010-1-2010
• IP for water & dust : IEC60529

FEATURES

• Large Jaw Opening : For RISH Clamp ES1000 AC Jaw opening of 51mm for standard wire diameter of 50mm and for RISH Clamp ES400 AC Jaw
  opening of 41mm for standard wire diameter of 40mm for 400A
• Narrow Body : Narrow housing for firm grip and easy to carry.
• High Accuracy for low current measurement : The clamp meter can measure accurately at not only the High currents but also Low current ranges.
• User selectable Backlit : It is possible to conduct measurement using the clamp meter during night time in darkness with the help of Backlit.
• Temperature measurement : Temperature from 0 to 1300 °C using K type thermocouple sensors.
• AUTO POWER OFF : In order to save the power of the Batteries, the clamp meter will automatically shut OFF if it detects no activity for 15 minutes
• Relative Measurement : By pressing REL key, the zero correction is made and relativevalue is measured. All functions can measure Relative value
  except Hz/Duty
• Hold Function : By pressing HOLD key reading on the display can be latched. Simultaneously HOLD is displayed on display.
• Hz / Duty : The instrument can measure frequency (Hz) and Duty cycle (%) of AC voltage by pressing yellow key in VAC function.
• NULL ZERO Correction for Resistance : For Low ohm measurement, the lead resistance can be compensated by pressing REL key
• Non contact voltage (NCV) detection : Presence of AC voltage >75 V AC 50/60 Hz can be detected by keeping jaws near voltage carrying conductor.
• AUTO and MANUAL ranging modes : In AUTO ranging mode the instrument automatically selects the range with best resolution depending on the applied input. In MANUAL ranging mode range is user selectable using MAN key.
• Diode and continuity testing : For testing diode and transistors, diode measurement function is available. Continuity test generates beep sound if resistance is less than 75 ohm