Description | SPECIFICATIONS
- AC Current via Jaw
Range : 999.9A
Resolution : 0.1A
Accuracy : 2% ± 5 digits (10-100 Hz) ; 2.5% ± 5 digits (100-500 Hz)
- AC Current via Flexible Current Probe
Range : 2500A
Resolution : 0.1 A (≤ 999.9 A) ; 1 A (≤ 2500 A)
Accuracy : 3 % RD + 5 digits (10 Hz to 500 Hz)
- DC Current
Range : 999.9A
Resolution : 0.1 A
Accuracy : 2% ±5 digits
- AC Voltage
Range : 600V to 1000V
Resolution : 0.1 V (≤ 600.0 V) ; 1 V (≤ 1000 V)
Accuracy : 1 % RD + 5 digits (20 Hz to 500 Hz)
- DC Voltage
Range : 600V to 1500V
Resolution : 0.1 V (≤ 600.0 V) ; 1 V (≤ 1500 V)
Accuracy : 1% ±5 digits
- Frequency Via Jaw
Range : 5.0 - 500.0 Hz
Resolution : 0.1 Hz
Accuracy : 0.5% ± 5 digits
- Frequency via Flexible Current Probe
Range : 5.0 - 500.0 Hz
Resolution : 0.1 Hz
Accuracy : 0.5% ± 5 digits
- Resistance
Range : 600.0 Ω ; 6000 Ω ; 60 kΩ
Resolution : 0.1 Ω (≤ 600 Ω) ; 1 Ω (≤ 6000 Ω) ; 10 Ω (≤ 60 kΩ)
Accuracy : 1% ± 5 digits
- Capacitance
Range : 100 μF ; 1000 μF
Resolution : 0.1 μF (≤ 100 μF) ; 1 μ F (≤ 1000 μF)
Accuracy : 1% ± 5 digits
- Jaw Opening : 34mm
- Flexible Current Probe Diameter : 7.5mm
- Flexible Current Probe Cable Length (head to electronics connector) : 1.8M
- Operating Temperature : 14°F to 122°F (-10 °C to 50 °C)
- Storage Temperature : -40 °F to 140 °F (-40 °C to 60 °C)
- Size : 281 mm x 84 mm x 49 mm
- Weight : 520g
FEATURES
- Measure safely with CAT III 1500 V rated clamp meter
- Thin jaw for access to cables in crowded combiner boxes
- Sturdy IP54 rated for outdoor use and solar installation
- Work efficiently with dc power measurement, audio polarity and visual continuity
| SPECIFICATIONS :
- DC VOLTAGE RANGE : 4-1000 V (Auto Ranging)
- AC VOLTAGE RANGE : 4 to 750V (Auto Ranging)
- AC VOLTAGE : 4V, 40V, 400V, 750V (Auto) (40-500Hz)
- DC VOLTAGE : 4V, 40V, 400V, 1000V (auto)
- FREQUENCY RANGE : 10 Hz, 50 Hz & 500 Hz
- FREQUENCY ACCURACY : ±(0.5% rdg + 2 dgt)
- RESISTANCE : 400Ω, 4KΩ, 40KΩ, 400KΩ, 4MΩ, 40MΩ (Auto)
- DIMENSION : 250x98x35 mm
FEATURES :
- Automatic.
- 3 V Sensitivity.
- Select Button.
- Data Hold Button.
- Audible Continuity Check.
- Diode Test Functions.
- Low Battery Indications.
- Over Volt Protections 200V DC and AC Peak.
- Automatic, Positive Implied, Negative Polarity Indication.
| SPECIFICATIONS :
- AC VOLTAGE : 750V
- DC VOLTAGE : 1000V
- AC CURRENT : 200A
- RESISTANCE : 2M ohms
- CONTINUITY TEST : 20KHz
FEATURES :
- TRANSFORMER JAWS
- TIGGER
- DATA HOLD SWITCH
- ROTARY SWITCH
- 3 1/2 DIGITS DISPLAY
- BACK LIGHT SWITCH
- COM INPUT TERMINAL
- V/OHM INPUT TERMINAL
| SPECIFICATIONS :
- AC VOLTAGE : 750V
- DC VOLTAGE : 1000V
- AC CURRENT : 1000A
- DC CURRENT : 1000A
- RESISTANCE : 60M
- CAPACITANCE : 1000µF
- TEMPERATURE : -0 F~1832ºF
FEATURES :
- DISPLAY : 3 5/6 DIGIT DISPLAY
- POLARITY : AUTO POLARITY
- SAMPLING RATE : 2~3 TIMES/SECOND
- POWER : 3V BETTERY
- JAW OPENING : 50mm
| SPECIFICATIONS :
- AC CURRENT : 600A
- AC VOLTAGE : 600A
- DIODE RANGE : 1mV
- FREQUENCY : 50Hz~400Hz
- DIMENSION : 185mmx51mmx25mm
- RESISTANCE : 60M ohms
- CAPACITANCE : 1000μF
FEATURES:
- Op. Current <2mA (no back light).
- LCD Display,
- Auto / Manual Ranging, Data Hold.
- NCV APO, Temperature, Frequency, Max Hold.
- Diode Test, Resistance, Duty Cycle.
- Continuity Buzzer, Backlight, Trms.
- Low Battery Indicated.
| SPECIFICATION
- DC VOLTAGE: 1000V
- AC VOLTAGE: 750V
- AC CURRENT: 1000A
- DC CURRENT: 1000A
- RESISTANCE: 200OHMS to 20 MEGA OHMS
- CAPACITANCE: 400uF to 40uF
FEATURES:
- 3½ Digit Clamp Meter with Backlight
- 2000 Count
- Clamp Torch
- Jaw Open : 52 mm
- Auto Power Off (APO)
- True RMS
- POWER : 9V (6F22) X 1
- Standard Accessories : Soft Carrying Case, Manual, Test Lead
- Dimension : 270(H) x 123(W) x 35(D) mm
|
Content | The Fluke 393 FC CAT III 1500 V True-rms Solar Clamp Meter with iFlex is designed for solar photovoltaic (PV) installation technicians and maintenance professionals who work in high voltage DC environments: PV arrays, wind power, electric railways, data centers battery banks for uninterruptible power supplies. The clamp meter will measure up to 1500 V DC and 1000 V AC with test leads, and up to 999.9 A DC or AC through the clamp jaw. The included iFlex flexible current probe extends AC current measurements up to 2500 A. The 393 has a thin jaw, giving you access to cables in crowded combiner boxes. Plus, the test leads are designed with your work in mind, and are also rated to CAT III 1500 V DC. | Meco Digital Clamp Meter 2250-HZ comes with an assortment of features like data hold diode test data hold and % duty cycle. It is equipped with 2250-Hz Auto 10000A AC 3 digit 3999 counts APO frequency and data hold. | The MECO-G 1000A AC Digital Auto Ranging Clamp Meter is a great choice for those who need a reliable and accurate clamp meter. It features a large jaw opening for easy clamping, auto ranging for easy use, and a backlit LCD display for easy reading. The MECO-G clamp meter is a great choice for measuring dc voltage and current, as well as ac current. It has a range of 600mV to 6V, 60V to 600V, and 1000V, making it suitable for a variety of applications. The ac current range is 60A to 600A, and 1000A, with an accuracy of (2.5% of reading + 10 digits). The clamp meter also features a resistance accuracy of (1.5% of reading + 5 digits). | | The MECO-G TRMS Clamp Meter is a versatile tool for measuring clamping forces in a variety of applications. With its easy-to-read LCD display, the meter is perfect for use in the laboratory, factory, or field. The Meco-G 35/6 digit 6600 counts LCD Display clamp meter is an accurate and versatile instrument for measuring AC currents and voltages. With six ranges and an ac voltage accuracy of 1.5%+5 digits, this meter can measure currents up to 600A and voltages up to 600V. The dc voltage range can measure currents up to 6V and voltages up to 60V. The Picking Technologies Gauge Clamp Meter is an essential tool for testing and measuring the clamping force of any material. | The HTC CM-2046 is a reliable and easy-to-use clamp meter that is perfect for a variety of applications. This clamp meter features a large LCD display for easy reading, a built-in LED light for illumination in dark areas, and a durable design that is built to last. The HTC Clamp Meter is a reliable and accurate device that is perfect for measuring DC and AC voltage, AC current, and resistance. With a DC voltage accuracy of 0.5% and an AC voltage accuracy of 1.0%, this meter is perfect for use in any situation where precise measurements are required. Additionally, the AC current range of 200A/1000A and the AC current accuracy of 2.0% make this meter perfect for measuring large currents. Finally, the resistance accuracy of 0.8% ensures that this meter is perfect for measuring resistance in any circuit. |
Reviews
There are no reviews yet.