| Description | SPECIFICATIONS
- DC VOLTAGE : Upto 600mV
- AC VOLTAGE : Upto 600mV
- DC CURRENT : Upto 6000 µA
- AC CURRENT : Upto 6000 µA
- CAPACITANCE :Upto 60 mF
- FREQUENCY : Upto 10Mhz
- RESISTANCE : Upto 60 M Ω
- TEMPERATURE : -20~ 1000° C (-4~ 1832°F)
FEATURES
- Display Mode: LCD
- Display Counts: 6000
- Ranging : Auto and Manual
- Update rate: 3 Times per second
- Display show minimum/maximum value.
- Display freezes present reading.
- True RMS
- Duty cycle test.
- AC/DC Voltage
- AC/DC Current
- Resistance
- Capacitance
- Frequency
- Temperature
- Diode Test
- Continuity Test
- NCV
- Data Hold
- Backlight
- Auto Power Off
- Low Battery Indication
- Relative mode.
| SPECIFICATIONS :
- DC VOLTAGE : 200mV - 1000 V
- AC VOLTAGE : 200mV to 750V
- AC ACCURACY : ?(1%+4)
- DC ACCURACY : ?(0.5%+1)
- AC CURRENT : 200?A - 20 A
- DC CURRENT : 200?A - 20 A
- RESISTANCE : ?0.8% + 1
- DIMENSIONS : 170x80x43 mm
FEATURES :
- 3 ½ digit liquid crystal display (LCD) with a maximum reading of 1999..
- Automatic, (-)negative polarity indication.
- Automatic.
- Highest digit of(1) or (-1) is diplayed at MSD.
- 3 measurements per second, nominal..
- VOLTAGE MEASUREMENT.
- CURRENT MEASUREMENT.
- RESISTANCE MEASUREMENTS.
- DIODE AND TRANSISTOR TEST MEASUREMENTS.
- TRANSISTOR JUNCTION TESTS.
- TRANSISTOR hFE MEASUREMENTS.
- CONTINUITY MEASUREMENTS.
| SPCIFICATIONS :
- AC CURRENT : 400µA / 4000µA / 40mA / 400mA / 4 / 20A
- DC CURRENT : 400µA / 4000µA / 40mA / 400mA / 4 / 20A
- DC VOLTAGE : 400mV / 4 / 40 / 400 / 1000V
- AC VOLTAGE : 4 / 40 / 400 / 750V
- TEMPERATURE : -20°C ~ 1300°C
- RESISTANCE : 400Ω / 4kΩ / 40kΩ / 400kΩ / 4MΩ / 40MΩ
- CAPACITANCE : 40 / 400nF / 4 /40 /100 uF
- FREQUENCY : 9.999 Hz-9.999 MHz
FEATURES :
- Auto / Manual, 3 Digit, 3999 Count LCD, with APO, Capacitance, Frequency, Duty Cycle & Temperature.
- Diode Test, Audible Continuity, Data Hold.
| SPECIFICATIONS :
- AC VOLTAGE : Up to 750 V
- DC VOLTAGE : Up to 1000 V
- AC RESPONSE : 40 Hz ~ 1 KHz
- ACCURACY : +-(0.8% rdg + 5 dgt)
- DC CURRENT : 10 A
- RESISTANCE : Up to 60 MOhm
- CAPACITANCE : Up to 100 mF
- DIMENSIONS : 147 x 71 x 45 mm
FEATURES :
- 3 5/6 Digits
- 6000 Counts
- TRMS
- Auto Ranging
- NCV (LED, Buzzer & EF Strength)
- Continuity Test (LED, Buzzer & EF Strength)
- LCD with Backlight
- Data Hold
- Auto Power Off
- Holster with Magnet
- Torch Light
- Test Lead Gripper
- Low Battery Indication
| SPECIFICATION:
- DC Voltage: 200mV/2V/20V/200V/1000V, ±(0.5% + 4)
- AC Voltage: 200mV/2V/20V/200V/750V,±(0.8% + 5)
- DC Current: 200uA/2mA/20mA/20mA/2A/20A, ±(1.0% + 5)
- AC Current: 200uA/2mA/20mA/20mA/2A/20A, ±(1.5% + 5)
- Resistance: 200Ω/2kΩ/20kΩ/200kΩ/2MΩ/20MΩ, ±(0.8% + 1)
- Temperature: -40 ~ 1000 °C / 0 ~ 1832 °F ±(1.0% + 5)
- Dimensions : 170(H) x 86(W) x 35(D)mm
FEATURES:
- 3 ½ Digital Multimeter, 1999 Counts
- Auto Power Off (APO) under natural operation
- Non Contact Voltage (NCV) Test
- Backlight LCD
SPECIAL FUNCTION:
- Diode Test NCV
- Transistor Testing Input impedance 10MΩ
- Continuity Buzzer Approx. <30+10 Sampling Rate 3 times per second
- Low Battery Display Approx. <7.5V AC Frequency Response 40-400Hz
- Auto Power OFF Approx. 30 min Power 9V (6F22) x 1
| SPECIFICATIONS
- DC VOLTAGE : 60mV-1000V
- AC VOLTAGE : 60mV-1000V
- AC CURRENT : ±(1.5% rdg + 3 dgt)
- DC CURRENT : 60mA-10A
- DC ACCURACY : ±(1% rdg + 10 dgt)
- AC ACCURACY : ±(3% rdg + 3 dgt)
- TEMPERATURE : ±(1.5% rdg + 15 dgt)
- FREQUENCY : ±(0.08% rdg + 2 dgt)
- RESISTANCE : 600Ω-60MΩ
FEATURES :
- Low Battery is Indication.
- Small Lightweight Design for One-Handed Use.
- Pocket Size, Back Light Display, Diode & Continuity Test with Buzzer.
|
| Content | B-555 DIGITAL MULTIMETER is a 6000 Count Manual Digital Multimeter which measures electronic circuits and electronic values more accurately. It is auto as well as manual ranging and a True RMS Multimeter with high performance capacity. It is equipped with 1000V DC and 750V AC measurement as well as 20A AC and DC Current Measurement. It is also capable to test Resistance upto 60 M Ohms, Capacitance upto 60mF, Frequency uptio 9.999 Mz, Temperature upto 1000°C, Diode testing, Continuity Test , Data Hold & NCV. | The Meco 603 Digital Multimeter AC Voltage Range 200mV to 750 V is one of the best selling products in the market. This device gives you accurate reading, helping you measure the electric supply. Well with this product you can measure voltage, current, and resistance of a circuit. The other name for this device is volt-ohm-milliammeter. This multimeter can be used to measure batteries, household wirings, electric motors and power supplies. | Meco Digital Multimeter 801 Auto is suitable for conducting diode tests. It comes with audible continuity and data hold features. The multimeter is equipped with auto/manual 3 digit 3999 count LCD with duty cycle temperature capacitance frequency and APO.Meco Digital Multimeter 801 Auto is suitable for conducting diode tests. It comes with audible continuity and data hold features. The multimeter is equipped with auto/manual 3 digit 3999 count LCD with duty cycle temperature capacitance frequency and APO. | | HTC DM-86 Digital Multimeter is a reliable and accurate device that is perfect for a wide range of applications. It features a large, easy-to-read LCD display and a wide variety of functions including AC/DC voltage and current, resistance, capacitance, frequency, and temperature. The HTC 3 digit Digital Multimeter is a professional-grade tool designed for precision measurement of DC and AC voltages, DC current, and resistance. With a large and easy-to-read LCD display, the multimeter is simple to use and provides accurate readings. The DC voltage accuracy is(0.5% + 4 Digit) and the AC voltage accuracy is(0.8% + 5). The DC current accuracy is (1.0% + 5) and the AC current accuracy is(1.5% + 5). The resistance accuracy is (0.8%rdg + 1 dgt). The battery test is 9V/1.5V/3V. The multimeter is compact and lightweight, making it easy to carry and store. | Meco 108B+ TRMS Auto ranging Digital Multimeter 60mV to 1000V AC/DC is a reliable and accurate multimeter that can be used to measure AC/DC voltage, current, and resistance. It is easy to use and has a large LCD screen that makes it easy to read. This Meco Digital Multimeter is a great addition to any tool box. It has a large, easy-to-read 3 5/6 digit LCD display with backlight, and is auto ranging. It can measure DC voltage up to 600V, DC current up to 10A, AC voltage up to 600V, and resistance up to 60M??. It is also TRMS and has a data hold function. This multimeter is perfect for any electrician, electronics technician, or anyone who needs to test voltage, current, or resistance. The Multimeters are the perfect tools for measuring and testing. With dimensions of 130x65x32 mm, they are easy to handle and use. |
Reviews
There are no reviews yet.