| Description | SPECIFICATIONS :
- DC VOLTAGE : 400mV, 4V, 40V, 400V, 600V
- AC VOLTAGE : 4V, 40V, 400V, 600V (Auto Ranging)
- AC CURRENT : 40A, 400A
- DC CURRENT : 40A, 400A
- DC ACCURACY : ±3% rdg +3dgt
- AC ACCURACY : ±1.2% rdg +3 dgt
- FREQUENCY : 10Hz, 100Hz, 1000Hz,10KHz, 100KHz, 1000KHz, 10MHz (Auto Ranging)
- RESISTANCE : 400Ω, 4KΩ, 40KΩ, 400KΩ, 4MΩ, 40MΩ (Auto Ranging)
- CAPACITANCE : 5nF, 50nF, 500nF, 5μF, 50μF, 200μF (Auto)
- DIMENSIONS : 170x31x17 mm
FEATURES :
- 3
� Digit 6000 Counts.
- Auto Ranging Digital Clampmeter with LCD Backlight.
- Torch Light.
- Auto Power Off.
- Resistance.
- Audible Continuity.
- Data Hold.
- When the Resistance is Less than 30%, The Buzzer is Sounded.
| SPECIFICATIONS:
- DC Voltage: 2000V
- AC Voltage: 2000V
- DC Current: 2000A
- AC Current: 2000A
- Resistance: 20 M ohms
- Capacitance: 2000uF
FEATURES
- Display Mode: Display by LCD
- Maximum Display: 1999
- Digits: 3 ½ Digits
- Maximum span of jaw: 55mm
- Auto Range
- Inrush Current
- Resistance
- Capacitance
- Diode Test
- Continuity Test
- Data Hold
- LED Testing
- Back Light + Lamp Light
- Auto negative polarity indication: displaying ‘-’
- Auto Power Off
- Battery: 9V
| SPECIFICATIONS :
- DC CURRENT : 600A
- AC CURRENT : 600A
- AC VOLTAGE : 600V
- DC VOLTAGE : 600V
- DISPLAY : 3 5/6 digit,6000
- BETTERY : 9V (6F22)
- TEMPERATURE : 600°C
- CAPACITANCE : 1000uF
- FREQUENCY : 10 MHz
-
RESISTANCE : 60MΩ
FEATURES:
- Op. Current <2mA (no back light).
- LCD Display,
- Auto / Manual Ranging, Data Hold.
- NCV APO, Temperature, Frequency, Max Hold.
- Diode Test, Resistance, Duty Cycle.
- Continuity Buzzer, Backlight, Trms.
- Low Battery Indicated.
- Duty Cycle : 0.1% - 99.9%.
| SPECIFICATIONS :
- DC VOLTAGE TEST : 0V~1000
- AC VOLTAGE TEST : 0V~750
- BATTERY VOLTAGE : 1.5 V
- RESISTANCE : 500 MW/1000 V
- TEMPERATURE : -10 to 50 deg C(RH £ 75%)
FEATURES :
- Inbuild Protection Circuit to prevent the harm of reverse voltages.
- LCD Back Light Function with Indicator Switch.
- 3 Ranges of Insulation Measurement.
| | SPECIFICATIONS :
- DC VOLTAGE : 600V
- AC VOLTAGE : 600V
- AC CURRENT : 400A
- RESISTANCE : 20MV
- STORAGE TEMPERATURE : -20°C to 60°C, 0 to 80% R.H.
- OPERATING ENVIORNMENT : 0°C to 50°C at < 70% relative humidity.
- Dimensions : 185 x 65 x 28mm
- Weight : 170gms including battery.
FEATURES:
- DISPLAY : 3½ digit liquid crystal display (LCD)
- LOW BATTERY INDICATION : is displayed when the battery voltage drops below the operating level.
- Weight : 170gms including battery (approx.)
- Maximum Jaw : 25mm
|
| Content | Meco 36 Auto BL 25mm 400A AC/DC Auto Ranging Digital Clamp Meter is a great product for those who are looking for a reliable and accurate clamp meter. It is auto ranging and has a large jaw size of 25mm which makes it great for measuring large conductor sizes. The Meco Clamp Meter is a high quality and affordable device that is perfect for measuring DC voltage, AC voltage, and AC current. It features a easy-to-read large digital display and is compact and lightweight for portability. The clamp meter also has a carrying case for protection and easy storage. The product is a clamp meter used for measurement and testing. It has a large LCD display for clear readings, and a wide range of measurement functions. | B-6096 is a 2000V AC/DC and 2000A AC/DC TRUE RMS Digital Clamp meter. It adopts high performance MCU processor. It is of great value as it has high reliability, accuracy, quality and automatic setting range function. The product has a large digital display, full range overload protection, data hold function, under voltage detection, auto shut off function. The TRUE RMS function can accurately measure frequency voltage, suitable for measuring motor and compressor starting current. Along with AC/DC current, AC/DC voltage it can measure resistance, capacitance, continuity test, diode forward voltage drop, LED operating voltage, and other parameters. This instrument is easy to operate and carry making it an ideal tool for electrical measurement. Especially suitable for measuring large currents and starting currents.
| MECO-G TRMS Clamp Meter, R-2070D is a premium quality product from MECO-G. All MECO-G TRMS Clamp Meter, R-2070D are manufactured by using quality assured material and advanced techniques, which make them up to the standard in this highly challenging field. The materials utilized to manufacture MECO-G TRMS Clamp Meter, R-2070D, are sourced from the most reliable and official vendors, chosen after performing detailed market surveys. MECO-G products are widely acknowledged in the market for their high quality. We are dedicatedly involved in providing an excellent quality array of MECO-G Clamp Meters . | MECO-G Digital Insulation Resistance Tester, R-DT903A is a premium quality product from MECO-G. All MECO-G Digital Insulation Resistance Tester, R-DT903A are manufactured by using quality assured material and advanced techniques, which make them up to the standard in this highly challenging field. The materials utilized to manufacture MECO-G Digital Insulation Resistance Tester, R-DT903A, are sourced from the most reliable and official vendors, chosen after performing detailed market surveys. MECO-G products are widely acknowledged in the market for their high quality. We are dedicatedly involved in providing an excellent quality array of MECO-G Insulation Testers . | The Meco 27T-Auto digital AC clamp meter is a great tool for measuring current, voltage and resistance. With a 400 A and 600 V rating, this meter is the only choice for a wide range of applications. This digital AC clamp meter is a must-have for any electrician. With a jaw opening size of 25 mm, it can easily clamp onto most wires. The LCD display is easy to read, and the meter is lightweight and easy to carry. It has a dc voltage accuracy of ?(0.8 % + 3 Digits), an ac voltage accuracy of ?(1.2 % + 3 Digits), an ac current range of 0-400 A, and a resistance range of 0-20 M?. Searching for a reliable clamp meter that is simple to use? Look no further than the Meco 27T-Auto clamp meter! This meter is the only choice for anyone who wants an easy-to-use meter that helps them measure and test things easily. | This Meco Digital Clamp Meter is an auto-ranging clamp meter having a massive 2000 count of 3.5 digits. In addition, one of the biggest advantages of this automated Meco clamp meter is that it can hold a large quantity of data too. The clamp meter has an LCD display and also comes with an auto power-off function. It displays OT and -OI both, and this clamp meter has a function button, hold button and max button. This clamp meter is automatic, positive implied and negative polarity indication. |
Reviews
There are no reviews yet.